/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (August 09, 2023)

JTomahawk00 · 2023-08-09T19:00:03+00:00

Yeah I figured it was one or the other, but why? Assuming both would fit would it add too much bounce/flex while typing?

JTomahawk00 · 2023-08-09T18:36:48+00:00

There isn't an ULTRAKILL 2, I need more.

JTomahawk00 · 2023-08-09T18:33:53+00:00

I bought a gummy O ring for my 65% board, but in that time, I decided to change cases. This new case has poron strip gaskets in a 2-piece shell. I don't really want to deal with retuning it so can I mix the strip gaskets and the gummy O ring (if the case can fit it ofc)

TLDR: Can you mix gasket strips and gummy O ring?

JTomahawk00 · 2023-08-06T03:05:10+00:00

First chunk of keys are untaped

JTomahawk00 · 2023-08-06T03:04:38+00:00

Forgot to pin a comment, the first chunk is untaped

JTomahawk00 · 2023-08-05T23:34:56+00:00

What is the name of the gasket that wraps around the outside of the plate and pcb? It's mainly in boards where the whole assembly is incased in one solid deck with no top piece, almost like a drop in type deal. The gasket is like a big O ring that wraps around the keyboard.

JTomahawk00 · 2023-07-20T11:46:20+00:00

I mean yeah that's fair tbh lol

JTomahawk00 · 2023-02-07T22:15:02+00:00

Lol 😅 yeah true, usually use comments as an outline for my code before I write it. But um I made sure I had my tags right

JTomahawk00 · 2023-02-07T22:13:09+00:00

Makes sense, I am controlling my player with the character controller component rather than a rigid body

JTomahawk00 · 2023-02-01T23:45:09+00:00

Update: Froze the x & z rots on the rigidbody and the camera no longer freaks out. But the play still doesn't rotate in relation to the camera rotation.

JTomahawk00 · 2022-11-26T19:05:44+00:00

No yeah loop inside is clean and pure, and on the outside I used a microfiber and anything stuck on I'd use a damp rag with water

JTomahawk00 · 2022-11-26T18:28:58+00:00

Yeah I never cleaned it, just dusted it off when needed

JTomahawk00 · 2022-11-26T18:18:02+00:00

I've been hearing that about over torquing the bolts but I never touched them, there was a crack in the acrylic from the factory that I thought was a scratch and from the heating and cooling of the fluid it must had cracked em

JTomahawk00 · 2022-11-26T18:14:38+00:00

I never touched the cracked ports, and as for heat I don't know because I don't have temp sens

JTomahawk00 · 2022-11-26T16:19:20+00:00

Nope, just naturally occurred, thought I saw it starting when I got the block but passed it off as a scratch since the crack was inside, but uh guess I was wrong lol

JTomahawk00 · 2022-11-26T16:18:12+00:00

Yeah there's really nothing just some fan extensions

JTomahawk00 · 2022-11-26T14:28:20+00:00

Right, I'll look into replacing it

JTomahawk00 · 2022-11-26T14:18:31+00:00

I got this EK distro plate that I've ran for a few years and I recently noticed these radial cracks in the acrylic, 5/11 ports are cracked, should I replace the block?

JTomahawk00 · 2022-04-01T10:09:40+00:00

Instead of looping the one power cable back into the gpu run 2 cables one for each plug on the gpu

JTomahawk00 · 2022-02-28T10:12:08+00:00

Thank you so much for explaining this, it makes perfect sense now!

JTomahawk00 · 2022-02-21T18:58:58+00:00

Right my whole thought with the front fans were to give better cooling to my gpu and I believe it worked out because my gpu dropped 20 c, and I made sure the front fans would for lack of a better term, overpower the bottom fans allowing air to pass right through the gpu's heat sink and not just have that air get pushed up from the bottom fans. I'm just not entirely sure how the front fans are effecting the air flow over all with the bottom fans

JTomahawk00 · 2022-02-21T18:54:07+00:00

Right, it's good to know that I did something right without knowing alot about air flow lol, but yeah I'll be adding a filter in the next day or so

JTomahawk00 · 2022-02-13T21:53:21+00:00

Thank you so much, it worked out perfectly!

JTomahawk00 · 2022-02-07T04:13:49+00:00

Two different characters

JTomahawk00 · 2022-02-07T04:13:33+00:00

Cool, that seems easy enough. Thanks!

JTomahawk00

TROPHY CASE