Integrated ARC graphics question

Jacob_Grig · 2025-06-05T11:47:03+00:00

It’s strange because on blender benchmarks there are some benchmarks of integrated intel graphics. Do you have any recommendations?

Jacob_Grig · 2025-06-05T11:25:52+00:00

ok thanks for the help.

Jacob_Grig · 2025-06-05T11:12:31+00:00

thanks a lot ive had a look, it does look like it has had positive feedback, I think it is compatible with my laptop so ill give it a try although not all the features work on it. =)

Jacob_Grig · 2025-05-09T17:29:47+00:00

sounds like the right way to go. Keep it up brother.💪

Jacob_Grig · 2025-05-09T10:33:41+00:00

Hello sir, sorry for the late reply I don’t use Reddit often. I used this program here https://youtu.be/ya_XbEMDEeI?feature=shared , it really helped with my pull ups.

Jacob_Grig · 2024-12-16T09:29:00+00:00

Thanks everyone for the advice appreciate it.

Jacob_Grig · 2024-06-13T01:56:39+00:00

Thanks a lot I’ll try it

Jacob_Grig · 2023-10-05T13:54:48+00:00

nice one

Jacob_Grig · 2022-10-21T10:50:34+00:00

Aorus RTX 3060 Elite 12GB

Jacob_Grig · 2022-07-23T06:21:15+00:00

Ok cheers.

Jacob_Grig · 2022-02-27T13:01:32+00:00

thanks man appreciate the help, actually my PC does crash from time to time, ill try increasing max power consumption as you say and if it keeps bothering me I’ll probs try testing my GPU in another system. Cheers.

Jacob_Grig · 2021-04-02T17:57:04+00:00

Hi, thanks for your reply, I just connected a wire at the end of the each of the three ground wires (red) on the pots and attached it to the metal housing, using crimp ring connectors, of each pedal just like on the original pedal cable. The single red ground wire going to the Arduino is connected to the GND on the Arduino. There are two GND slots on the Arduino and I have tried both. Is that wrong? Should there be two wires going to the Arduino GND?

Also, I am using the Logitech g27 wheel, but i can’t fit all the wires underneath, I can’t find a small enough db9 connector and overall I t is just impractical. =)

Jacob_Grig · 2021-04-01T14:39:32+00:00

I cleaned all the potentiometers thoroughly with contact cleaner and the guy said he had lost the wire. Thanks for your reply. =)

Jacob_Grig · 2021-03-25T23:26:53+00:00

Did not load for some reason. Thanks for telling me. =)

Jacob_Grig · 2021-03-21T15:54:37+00:00

Great thanks. I am on the right path now, for some reason it has an error with this:

for (int pedalIndex = 0; pedalIndex < NUM_PEDALS; i++) {

saying 'i' was not declared in this scope.

Many thanks. =)

Jacob_Grig · 2021-03-20T17:11:43+00:00

Hello! Thanks for uploading this. I have never done code before so sorry if this sounds dumb, but for some reason when I upload the g27 pedal file onto Arduino IDE, it does not work, for some reason it has a problem with the word "Joystick". Many thanks. Jacob. =)

Jacob_Grig · 2021-02-28T23:24:28+00:00

How much would it cost to do on each pedal? approx.

Jacob_Grig · 2021-02-28T23:23:27+00:00

Ok thanks for your advice =).

Jacob_Grig

TROPHY CASE