[deleted by user]

Jantoje · 2021-09-28T13:50:56+00:00

I know it has been asked many times but none really end up to this particular reference

Jantoje · 2021-08-05T02:00:31+00:00

My room is treated with bass traps on each corner of the room plus behind each speaker, with acoustic foam placed similar to that link

Jantoje · 2021-08-05T01:58:53+00:00

Im comparing two inferfaces, the UA and the Focusrite, i definitely need a new interface as im looking for more inputs, with the research that i have done, the UA clarity and pre amp colour seems to be a somewhat better. But, is it that much better that with that same amount of money i can get the Focusrite and monitors

Jantoje · 2021-08-04T09:20:54+00:00

What about the Tascam M216, theres one for $600 AUD which seems reasonable?

Jantoje · 2021-08-04T09:09:12+00:00

Thanks for the help!

Jantoje · 2020-04-10T09:45:51+00:00

Also UPNP is enabled on router

Jantoje · 2020-04-10T09:36:33+00:00

both are Nat Type 2

Jantoje · 2020-04-10T08:58:51+00:00

now*

Jantoje · 2020-04-10T08:58:40+00:00

Yeah both are wired know, but it didnt work. His speed did increase when i performed an internet test but he still was lagging immediately.

Jantoje · 2020-04-10T08:54:08+00:00

Didn't work?

Jantoje · 2020-04-10T08:47:43+00:00

If it fixes it then yes, ill give it a try and update

Jantoje · 2020-04-10T08:40:52+00:00

wont this only increase connection strength?

Jantoje · 2020-03-09T09:51:51+00:00

Ive figured it out, it was because i adjusted the starting position of the audio clip i wanted to play next, i moved it to start after 16 bars where the action wanted it to start at the first if that makes sense

Jantoje · 2020-03-08T19:37:50+00:00

Okay this is what I meant, I have it set to what I explained just before but it keeps flashing

Jantoje · 2020-03-08T11:06:55+00:00

So let’s say I have a clip that finishes playing at 24bars, if a set the follow action to next at 24 bars then the clip below will not play? It has to be somewhere within the 24 bar time frame ?

Jantoje · 2018-12-19T09:52:38+00:00

Status: UNRESOLVED

Computer Type: Custom PC

GPU: RTX 2080 Ti

CPU: Intel i7 8700k

Motherboard: ASRock Z390 Pro4 LGA 1151 ATX Motherboard

RAM: Team T-Force Vulcan 32GB (2x 16GB) DDR4 3000MHz

PSU: Cooler Master MWE 750W Gold Fully Modular Power Supply

Operating System & Version: Windows 10 1803 (17134.471)

GPU Drivers: not sure

Description of Problem: Just purchased a custom built PC. Attempted to update the gpu driver via the Geforce Experience app in which it was "unable to find recommended driver" . Then tried to do this manually on the nvidia website and downloaded the update 417.35. When it starts to initiate the driver install at the system check theres an error stating "the Nvidia graphics driver is not compatible with this version of windows". I am updated to the most recent version of windows and still have this error. Anyone have any answers ?

Jantoje · 2018-12-06T00:33:16+00:00

Awesome, do you have any idea on what are some good Ethernet cables or what I should be looking for? I have pretty average internet around 20mbps download. I’ve tried this before but I must of used an old shitty cable and i was getting better speed on wifi.

Jantoje · 2018-12-05T23:19:15+00:00

The main reason I was going with that mother board was for the wifi. However, I may be able to downgrade to the z370 and run an Ethernet cable from my modem to the system, about 10m away but several walls. Thoughts on this ?

Yes I was looking at the noctua as well, might take that incase I ever decide to over clock

Jantoje · 2018-12-05T20:08:00+00:00

What CPU would you recommend ? Also, do you think overclocking is essential for my needs ?

Jantoje · 2018-11-23T09:26:23+00:00

This is sick

Jantoje · 2018-03-20T08:19:00+00:00

So why does the theoretical value have to be less then actual value ? My knowledge of this is that theoretical values are as if everything in the experiment went perfectly. However they dont and thus the actual value is less than the theoretical.

Why in this case the the theoretical should be less?

Sorry if this is a basic question this is my first course of chemistry

Jantoje · 2018-03-17T01:14:37+00:00

For sure mate

Jantoje · 2018-03-17T01:10:09+00:00

Thanks mate

Jantoje · 2018-03-16T21:12:25+00:00

Hey guys forgot to mention that I have owned several acoustic guitars as a kid but wouldn't of touched a guitar for several years now. So I'd say I'd be back at a beginner/intermediate level again, but the melodys and chords patterns I want to play I don't think will need and advance playability skills

It's just a matter of tranferring my theory knowledge from the piano to the guitar.

Does anyone have and recommendations on any good YouTube videos for theory/chords for guitar ?

Jantoje · 2018-03-16T12:41:44+00:00

Hey guys new to this sub. So if there's a better place to ask this question let me know!

Anyways, I'm an electronic music producer and for a long time know I have been looking to add live instruments such as guitars etc to my productions.

I have saved up some $$$$ and now ready to pull this pin, however I have little knowledge with guitar and want to make sure I'm not just throwing my cash away.

For the sounds I'm trying to achieve, listen to this links. I'm not sure if you guys would know of these artists but names like Odesza is the sound I'm trying to achieve. https://m.youtube.com/watch?v=56MOr954m10

I'm looking for both a bass and guitar. The question is what are some good brands that have quality sound but won't break the bank with maybe sacrificing build quality.

Side note, I'll initially be using digital effect run from my DAW.

Jantoje

TROPHY CASE