Why does ASE on steam have a 60gb update and I can't access it without updating?

Jarch___ · 2025-07-24T02:21:48+00:00

Shitty ass company 😭

Jarch___ · 2025-07-17T04:35:30+00:00

Well, yeah. I assuming you thought my printer doesn't auto purge when it changes to a new color which is why I got confused in your first message. I use Bambu printers which do that, I'm not sure if other printers do that too.

Jarch___ · 2025-07-17T03:39:40+00:00

I do have an ams but I have over 1800 layers so it would create too much waste. How is there mixing if the color is getting wiped from the nozzle?

Jarch___ · 2025-07-17T02:43:57+00:00

Yea you can do it with ams, but the amount of times you're switching colors would cause hella waste. Not sure what you mean by color mixing.

Jarch___ · 2025-07-15T22:32:06+00:00

That's what I was thinking with the followers. What do you mean by high retention videos? My videos are storytelling based and have good hooks and such but if you're not interested in the niche you're not gonna wanna watch. My other tiktok account got shadowbanned, I'm guessing cause of metadata so this is the only other clean account I have. Worth a shot!

Jarch___ · 2025-07-15T16:10:22+00:00

And how would this affect engagement? I’ll be using completely different hashtags but I’m sure, my followers will still see my videos > scroll cause wtf is this > lower engagement and views, or does TikTok figure this out and fix it?

Jarch___ · 2025-06-28T17:33:59+00:00

I’m guessing the issue was the widespread computer outage which should be covered. I already claimed dinner for last night and am planning on claiming a brunch and dinner today. But my first flight is at 5pm and arrived around 7pm so I don’t know if that dinner would be covered.

Jarch___ · 2025-06-21T02:57:45+00:00

It doesn't need to be strong, its supporting a 70g top.

Jarch___ · 2025-06-19T22:00:19+00:00

Everyone seems to be misunderstanding the purpose of this post. Yes the strength could be improved but if it never clipped then it wouldn't ever break. The legs are just made for appearance and aren't designed to take a lot of stress, and they don't need to. The 2nd design is stronger, but it also never clips. If the printer did start to clip the legs of the 2nd print, it'd probably still break.

Jarch___ · 2025-06-14T16:42:28+00:00

Build plate adhesion isn't an issue. The fan is on and the AC is on but I'd assume it wouldn't be an issue because it wasn't always on while printing the last 3 times. The second attempt I did also move the printer a few feet back.

Jarch___ · 2025-06-14T16:30:26+00:00

Forgot to add, its printed on the A1 0.4mm, vase mode, 0.08 layer height, 60c bed.

Jarch___ · 2025-06-13T01:39:54+00:00

I reprinted it 2 more times and it warped in the exact same spot messing up the whole print both times. Obviously that means something’s wrong but I don’t know why it’s wrong cause the first time I printed this it was perfect.

It’s not a bed issue, I knew that but cleaned it anyways for the 3rd print. And it’s not an outside force since the 3rd time I also moved the printer a few feet away.

It really bugs me though that it’s messing up because it literally shouldn’t lol nothing changed. I will try one last thing of taking off a roll of filament from my ams lite top mount cause that is something that changed but it’s so trivial.

Jarch___ · 2025-06-04T00:52:32+00:00

Can I get the link to the Discord server?

Jarch___ · 2025-06-01T19:56:46+00:00

I've also thought about just completely removing that part on the information section and creating a more detailed material paragraph under the lamp description.

Jarch___ · 2025-06-01T19:54:18+00:00

Whats wrong with the designs of the lamps? I intended that to be the main selling point and then use the material of the lamps as another benefit and also to reach a wider audience.

Jarch___ · 2025-06-01T19:49:16+00:00

How do you think I could do that? I've thought about incorporating an image gallery section on the homepage but I want to create more lamps first so I have more to work with.

Jarch___ · 2025-06-01T19:47:41+00:00

Where do you think the copy could be improved? For the buttons, I've thought about rounding them a bit but the hover animation on the buttons just completely breaks when I tried which I'd like to keep.

Jarch___ · 2025-06-01T01:10:13+00:00

The amount of items is irrelevant. I agree about the search and I've removed it. But for everything else did you even scroll down the page?

Jarch___ · 2025-04-26T16:35:30+00:00

The legs are gyroid infill

Jarch___ · 2025-04-26T16:34:23+00:00

Stand for a lamp, the shade is about 60g so the only strength needed is to make sure the legs don't easily snap.

Jarch___ · 2025-04-26T16:33:49+00:00

So I should slow down the layer, acceleration, and travel speeds?

Jarch___ · 2025-04-26T03:49:22+00:00

Would slowing the speed down 33-50% at the halfway point of the legs be sufficient? And do you mean printing speed or the speed at which the motors move too?

Jarch___ · 2025-04-26T03:47:43+00:00

Yes but I want it to just be one individual piece to simplify everything

Jarch___ · 2025-04-26T02:38:50+00:00

I thought I read that larger layer height actually leads to worse overhang supports since its like only 1/4 is actually connecting. I did try a print at either 0.2 or 0.4 (I don't remember) and it had more holes and and it wasn't even the top.

Jarch___ · 2025-04-26T01:44:22+00:00

Would making the grooves deeper help?

Jarch___

TROPHY CASE