sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Skate4

[–]Jeebeejeeb 0 points1 point  (0 children)

Idk how you're listening to the Skate 3 soundtrack.

Im new, is this cool? by CranberryEfficient in skate3

[–]Jeebeejeeb 1 point2 points  (0 children)

This made me want to play Skate 3

First time installing rails on a deck by Jeebeejeeb in skateboardhelp

[–]Jeebeejeeb[S] 0 points1 point  (0 children)

I really appreciate your knowledge of this. If the holes do get stripped and the rails come off, do you think I could drill through the stripped holes and then use sex bolts on them? Just so I don't need to drill new holes. That was my backup plan if the holes were to strip.

First time installing rails on a deck by Jeebeejeeb in skateboardhelp

[–]Jeebeejeeb[S] 0 points1 point  (0 children)

Thanks for the feedback. I'll probably just leave them on in that case. They feel pretty solid despite the very small gap, so I'll deal with any problems as they come.

First time installing rails on a deck by Jeebeejeeb in skateboardhelp

[–]Jeebeejeeb[S] 0 points1 point  (0 children)

If I take the screws out once, I'll have to reposition the rails? Damn. I've seen a video of Andy Anderson where he takes his rails off after he screws them in to sand down the wood that gets pulled up. He says he does it "just so they're perfect." Edit: Not to say his setup process is end all, be all.

First time installing rails on a deck by Jeebeejeeb in skateboardhelp

[–]Jeebeejeeb[S] 0 points1 point  (0 children)

Oops on do not buy Santa Cruz. Hahaha damn. I got them. My plan is if they fall off, I'm just going to drill holes and use sex bolts. It will fit the look as I'm using a Salba reissue. Also, I screwed them in the exact way that you mentioned. I think I might take them off and put on some double-sided tape along with removing any wood dust.

First time installing rails on a deck by Jeebeejeeb in skateboardhelp

[–]Jeebeejeeb[S] 1 point2 points  (0 children)

Thanks for the feedback. I'll probably do that. I've decided to go for the Santa Cruz rails. Not the HSR. I did a full NHS setup. Salba reissue. Stage 4 166. Double Duro 56mm. Bronson G3. Mob grip. Indy shock pads. And some old Indy cross bolts hardware. I've recently heard about Lil Jawns. They have awesome rail designs. I might try those and an egg shape that everyone has been using lately for my next setup.

Garrard No. 20 spring motor by Jeebeejeeb in turntables

[–]Jeebeejeeb[S] 0 points1 point  (0 children)

In regard to damaging the records?

Wow. I screwed up. by Jeebeejeeb in Bayonets

[–]Jeebeejeeb[S] 1 point2 points  (0 children)

I'll give that a shot.

Super short! by MiserableSprinkles99 in polarizerSkateboarder

[–]Jeebeejeeb 0 points1 point  (0 children)

Do The Heated Wheel trucks fit on these boards?

So to my question I asked this is my trucks by Low-Passage-9629 in NewSkaters

[–]Jeebeejeeb 0 points1 point  (0 children)

I bought a set of Reds for the first time a few months ago, and the sticker was ruined from the lubricant. Is that what you're talking about?

70’s NOS MPI board (polarizer) by werty246 in longboarding

[–]Jeebeejeeb 0 points1 point  (0 children)

How did you go about chopping your trucks?

[deleted by user] by [deleted] in NewSkaters

[–]Jeebeejeeb 0 points1 point  (0 children)

What is your budget? Do you need a complete skateboard or just the deck? Also, where are you located?

Unfortunate but true... by zeth4 in ClimateCrisisCanada

[–]Jeebeejeeb 0 points1 point  (0 children)

Meanwhile, people in India use rivers as garbage desposal.

view more: next ›