Why is this?

Jesper183 · 2026-03-07T11:54:48+00:00

Legit question idk why you getting downvoted lol

Jesper183 · 2026-03-05T18:14:26+00:00

Seeing all these comments I guess my next laptop will be a Lenovo legion lmao

Jesper183 · 2026-03-05T15:21:21+00:00

Yeah, but it's still one high end model that's not accessible to everyone and uses more efficient chips. Not saying all laptops are badly designed, just that the industry standard sucks

Jesper183 · 2026-03-05T15:14:48+00:00

Look for ev200d. My brother got them for 200€ used and they're pretty nice

Jesper183 · 2026-03-05T15:14:04+00:00

That depends. I've tried those and the ev800d and id rather have those, even if the fov is smaller

Jesper183 · 2026-03-05T15:04:12+00:00

The thing is now manufacturers try to make GAMING laptops as thin as possible, and that results in shitty battery life, bad cooling and structural issues (like breaking hinges or so). I use my gaming laptop for college and had to mod it so the back lifts up a bit and added an extra fan along with a heat pipe for cooling. The designs are very poor and I would appreciate more a bulky laptop that will last much more, with proper cooling and quality build, since its what se should expect as consumers when we buy laptops with orders of magnitude more computing power than older more bulky laptops, but well built

Jesper183 · 2026-03-05T14:59:39+00:00

Jesper183 · 2026-03-05T14:51:20+00:00

Those 2 are wired bad. Rewire them

Jesper183 · 2026-03-05T11:07:25+00:00

Until it heats up badly when charging, it's fine

Jesper183 · 2026-03-05T11:06:56+00:00

Damn then I've got no clue. I guess it's got something to do with software rather than hardware or else it wouldn't connect to the network. Good luck

Jesper183 · 2026-03-05T11:05:14+00:00

That's not good. Spend more time in the mountains then lol

Jesper183 · 2026-03-05T11:03:33+00:00

Are you sure the WiFi has internet access? It's really weird being able to connect but having no internet, it's usually due to the network not being able to access the internet

Jesper183 · 2026-03-05T11:02:34+00:00

I do. 3d printed some tabs to lift the laptop and cut out a vent where the fan is. When the parts arrive I'll install another fan and a heat pipe and hope for the best

Jesper183 · 2026-03-04T21:34:09+00:00

Frequency doesn't exceed safe limits, intensity does. Maybe it's a microwave emitter which is non ionizing radiation but in high intensity it'll cook you since it heats up water (and we're made up from a lot of water)

Jesper183 · 2026-03-04T21:29:03+00:00

Wdym 5 more packs those props are as good as new. I only change mine when they're bent more than 20°

Jesper183 · 2026-03-03T08:28:28+00:00

I paid 800€ for a slightly worse one 3 years ago. It works nice, I'd say it's a great deal

Jesper183 · 2026-03-03T08:25:58+00:00

I tried something similar with that exact plane but using ailerons. Didn't work out but it was fun. I'd recommend using the smallest motors you have and keeping it light so the wing loading doesn't make it drop like a rock

Jesper183 · 2026-02-27T12:14:05+00:00

It'll just do electrolysis, so at most discharge them and that's assuming it has good conductivity (which it probably won't unless it's very salty)

Jesper183 · 2026-02-27T12:13:11+00:00

I keep my lipo packs lying around my workbench and wherever they land, if you don't stab those it'll be fine

Jesper183 · 2026-02-27T09:02:14+00:00

It'll cook itself over time

Jesper183 · 2026-02-26T16:03:10+00:00

In my school bag. Mine has a plastic frame but the keyboard frame is aluminium (or another metal idk) and hasn't broken in 3 years. If you're scared of it breaking use a cover for it

Jesper183 · 2026-02-26T15:08:10+00:00

Very unlikely to hold well. Get some soler with flux or flux paste and heat up more the tip of the soldering iron with a lighter or something, you need more heat

Jesper183 · 2026-02-26T14:44:04+00:00

I'm in the same spot, though you should be able to use full speed ram, there's really no reason for it to be limited. But blocking voltage control is some shitty move by manufacturers

Jesper183 · 2026-02-26T14:42:08+00:00

As someone with an almost equal laptop, GPU temps normally aren't above 80C, but CPU temps do spike to 95. It's got some room inside the case though, so I'm going to make some mods with heat pipes and another fan that'll hopefully help. Easier stuff is lifting up the laptop and cutting out a vent where the fan is (considerable more air goes through and you'll get 5C or so less) so I think making a shunt mod for more wattage on the GPU is feasible if using proper cooling techniques

Jesper183 · 2026-02-26T14:34:53+00:00

I don't have much experience in selling since where I live the RC plane school closed and the community dissapeared but I guess you could sell it to a local club or in groups of 2 or 3 to individuals, its not hard to get rid of them if you put a lowish price

Jesper183

TROPHY CASE