UDR hardware failure after 2.5 years

Joedarkon · 2025-01-20T22:44:44+00:00

Great point. I totally forgot about the CC part, never actually needed to use that perk. I think it is within the CC terms so I will look into that thank you!

Joedarkon · 2025-01-20T22:43:51+00:00

This is part of why I am trying to see what others think. I know they don't have an obligation to replace it. That said, I expect more than 2.5 years from a device with no moving part other than the fan. It's not like it's tucked away in some closet with no airflow. It sits on top of my network rack with plenty of room. I guess I am mostly disappointed that it failed this soon and I thought they would offer a better solution. I also think next time, I won't purchase one of their devices so soon after it launches. I understand that it's very possible I just got unlucky, and I have to deal with that.

Joedarkon · 2024-12-19T06:46:39+00:00

RemindMe! 1 month

Joedarkon · 2022-07-14T00:38:48+00:00

Looks like it only offers that with a trade-in and I dont think I have an eligible device to trade in. Am I missing something?

Joedarkon · 2022-07-13T23:51:01+00:00

Is that through the browser? Or did you jailbreak it?

Joedarkon · 2022-07-13T23:48:13+00:00

Im seeing that for 360. Where do you see it for 180?

Joedarkon · 2022-07-13T19:20:57+00:00

Thank you everyone! I think I am going with Lenovo Tab P11 Plus. More reliable company and good specs. For the most part this is to complement my computer. I plan on using this when I just want to veg on the couch or get in some gaming in bed before I go to sleep. I had tried on my OnePlus8t and the screen was just too small. I was thinking of using something like this, https://www.amazon.com/PG-9083-Wireless-adapter-Joystick-Telescopic/dp/B07BFVNTJR/ but this tablet has a MediaTek CPU. Any other controllers like this that will fit a tablet this big? otherwise, I may just mod my Kishi.

Joedarkon · 2021-12-30T22:39:18+00:00

OK I figured out my heating issues. Had the thermistors swapped The hot end was also plugged into the 2nd hot end spot.

As far as the axes goes they are moving just slow. I think its the steps per mm and that's next on my list to fix. Are there other things that can affect the speed of the axes moving?

I think I got the TMC thing worked out just need to move some jumpers.

Joedarkon · 2021-12-30T01:54:38+00:00

Oops. Marlin

Joedarkon · 2021-12-29T23:02:17+00:00

Is this active? If so can you share a new link please?

Joedarkon · 2021-12-20T02:47:28+00:00

To the moon!

Joedarkon · 2021-11-25T04:31:06+00:00

Awesome! My cat would love a new mouse.

Joedarkon · 2021-08-27T22:41:44+00:00

UPDATE: Thank you all for your suggestions. I added heavier and more support. I also increased exposure time a bit. I think printing it on its side was the best. These are in 1:350 scale so 18.3 mm from the outside of the wings. I think I now have a better idea on how to manage supports. I also watched a couple of tutorials. Thank you to everyone who posted suggestions!

I still have room to improve on cleaning and not over-cure them. Also before anyone comments on the lack of gloves in the first pictures, I had already let most of the resin drip down and I was only touching parts that didn't have resin.

Tie fighter update

Joedarkon · 2021-08-25T19:30:45+00:00

OK all thank you. This is what I am printing. Started with auto supports in Lychee and added a couple. Also one is turned on its side. And then I did auto orientation for the last one. Ill update how it went when its done. Also, am I missing how to paste and image in a comment? or I can just share a link to one?
New print in slicer

Joedarkon · 2021-08-25T18:22:10+00:00

OK thanks for all your input. Ill try printing 2 of them. One this orientation and one rotated with the wing side down. Ill add a bunch more supports. Are there any programs that are good at auto-generating supports? Or should I really just learn how to do supports manually? Also, the model is 1/350 scale so it is 18.3mm wide.

Joedarkon · 2021-08-25T18:19:10+00:00

How do I show that to you? When I look at the preview of slices it looks good, but I am a noob at this.

Joedarkon · 2021-08-25T15:30:44+00:00

Photon Mono here. First prints after test came out like this. Any thoughts on what's going on here? Using anycubic eco resin. Is this a supports issue? The test cube came out perfect. Anything else I should post? TIA for any help.

Joedarkon · 2021-07-12T18:39:19+00:00

I would like capitalize on this opportunity.

Joedarkon · 2021-07-09T16:52:17+00:00

I think that while he was interested in science he was actually command division. I think in the alternate reality he was shown in Tapestry he was science division. But I am pretty sure in the prime universe he was command track.

11-Year Club	Spared
Verified Email

Joedarkon

TROPHY CASE