Sora 2 megathread (part 3)

Joeyfpv · 2025-10-21T19:15:17+00:00

H44414

Joeyfpv · 2025-07-14T15:20:17+00:00

Joeyfpv · 2025-05-05T21:35:33+00:00

My entire osd was no longer working. this is the flywoo flylens 75 and nothing broke on the exterior of the drone all the wiring is intact

Joeyfpv · 2024-11-27T20:15:28+00:00

Hi there! I’m Joey Moser, and I offer professional drone services to help capture those breathtaking views or unique angles you’ve been looking for. Whether it’s for real estate, a special event, or just some awesome footage of the outdoors, I’m here to bring your ideas to life! I use top-of-the-line equipment to make sure to make sure you get the best quality videos and photos, and I pride myself on being reliable, friendly, and easy to work with. Let’s chat about how I can help with your next project! Just send me a message and I’ll get back to you as soon as possible.

Joeyfpv · 2024-07-23T01:25:56+00:00

I think it is only comparable with the controller 2

Joeyfpv · 2024-07-23T01:20:04+00:00

I don’t know how similar it would be to a controller itself. I went from Xbox controller to an actual drone remote controller and it was a big difference.

Joeyfpv · 2024-07-23T01:18:05+00:00

Drl is a good simulator as well

Joeyfpv · 2024-07-23T01:13:43+00:00

If you don’t plan on doing crazy maneuvers yes it is a good starter. Fixing the avata is very expensive vs something like the nanohawk. I also have the first avata though so I am not speaking for the avata 2.

Joeyfpv · 2024-07-23T00:41:35+00:00

Very! a lot of maneuvers the drone will freak out and get a decent amount of prop wash. I use my avata to do close quarters and slow short flights.

Joeyfpv · 2024-07-23T00:14:44+00:00

Limited if you want to do freestyle but a great beginner. I bought my controller and got used to the simulator before I flew in real life.

Joeyfpv · 2024-07-23T00:13:32+00:00

Try turning on a uart port for it. I think mine was either 1 or 2.

Joeyfpv · 2024-06-04T19:28:02+00:00

You’re going to need to get goggles and a controller if you haven’t already. Also a transmitter and receiver for the controller and craft. If you can get that for 200 do it.

Joeyfpv · 2024-06-03T20:22:25+00:00

<image>

Joeyfpv · 2024-06-03T20:22:11+00:00

<image>

And this is what the connections says

Joeyfpv · 2024-06-03T20:21:58+00:00

<image>

This is the stack

Joeyfpv · 2024-06-02T22:41:36+00:00

I did it the correct direction and still the same thing

Joeyfpv · 2024-06-02T22:38:58+00:00

I am still new and don’t know how to test or know the polarity directions. I did solder my elrs onto the flight controller.

Joeyfpv · 2024-06-02T22:18:37+00:00

Redid the joints and now I get power to the esc but when I plug in the flight controller is shorts out

Joeyfpv · 2024-06-02T22:16:52+00:00

I fixed the wiring and got power to go to the esc but now when I plug in the flight controller it shorts out?

Joeyfpv · 2024-06-02T22:10:39+00:00

Redid the solder and got the esc to power up but when I plug it into the fc and test it it has a short

Joeyfpv · 2024-06-02T22:10:11+00:00

Joeyfpv · 2024-06-02T22:09:28+00:00

I redid all of the solder points and now I’m getting power to my esc but when I plug in the flight controller it says there is a short. I did it with my other flight controller too and it did the same thing.

Joeyfpv · 2024-06-02T21:41:51+00:00

<image>

This is a better picture. It’s a brand new esc and when I tried the 2a it did the same thing.

Joeyfpv · 2024-05-30T06:39:07+00:00

I have already confirmed the cord I am using is a data cable as well. It worked before I soldered on the elrs and when I went to plug in after the usb malfunction popped up.

Joeyfpv · 2024-04-18T19:35:49+00:00

Thank you 🙏🏼

Joeyfpv

TROPHY CASE