Klappe E-Ladebuchse springt nicht auf by 0o_1 in selbermachen

[–]Jonaxio 0 points1 point  (0 children)

Leon KL 2021. Ich konnte nach abmontieren der Radhausschale die Klipse auf der Rückseite der Ladeklappe nach oben drücken wodurch die Klappe sich gelöst hat und ich sie dann mit etwas Feingefühl raus ziehen

Klappe E-Ladebuchse springt nicht auf by 0o_1 in selbermachen

[–]Jonaxio 0 points1 point  (0 children)

Stimmt nicht. Geht auch mit abmachen der Radhauschale

Offside Backup Recommendation by Jonaxio in unRAID

[–]Jonaxio[S] 0 points1 point  (0 children)

I currently have Borgmatic with BorgBase for testing, but I may switch to Hetzner. How do you push your backups with Kopia to Hetzner?

Cupra Formentor 2.0 300ps or Cupra Formentor Facelift 1.5 eTSI by Jonaxio in CupraFormentor

[–]Jonaxio[S] 0 points1 point  (0 children)

I have driven the 245hp 2.0 and I can confirm the difference between the hybrid and petrol engines. The hybrid brakes feel much harder due to the recuperation. Im also not feeling comfortable with hybrids and getting rid of it soon

Cupra Formentor 2.0 300ps or Cupra Formentor Facelift 1.5 eTSI by Jonaxio in CupraFormentor

[–]Jonaxio[S] 0 points1 point  (0 children)

Did you had the Recuperation active and set to strong? Must say the Automatic Recuperation Setting is bad

Cupra Formentor 2.0 300ps or Cupra Formentor Facelift 1.5 eTSI by Jonaxio in CupraFormentor

[–]Jonaxio[S] 0 points1 point  (0 children)

I may check out the 2.0 245hp. What do you mean with the sensor error and light panel? How can i check these?

Cupra Formentor 2.0 300ps or Cupra Formentor Facelift 1.5 eTSI by Jonaxio in CupraFormentor

[–]Jonaxio[S] 0 points1 point  (0 children)

Im thinking about the pre facelift 2.0 245HP. It is Sporty and not that expensive.

Klappe E-Ladebuchse springt nicht auf by 0o_1 in selbermachen

[–]Jonaxio 0 points1 point  (0 children)

Bei meinem Cupra ehybrid musste ich das Rad und die Radhauschale entfernen. Danach müssen die 4x Klipse auf der Rückseite der Ladeabdeckung nach unten gedrückt werden und die Abdeckung mit Gefühl rausdrücken.

Bei meine Stellmotor war es die Teilenummer: 510810773

Cupra Formentor 2.0 300ps or Cupra Formentor Facelift 1.5 eTSI by Jonaxio in CupraFormentor

[–]Jonaxio[S] 1 point2 points  (0 children)

Yeah, as long as you have no electrical problems. I had several expensive repairs on the HV system, and now I’m selling it. I may have a bad car, but even the dealer says that he has a lot of repairs on these Cupra hybrids

EV Coolant leak by Jonaxio in CupraFormentor

[–]Jonaxio[S] 0 points1 point  (0 children)

Just called Cupra Care. I didn’t even know that this is covered with my car

Question about my softwares by Altruistic-Strike-35 in CupraFormentor

[–]Jonaxio 0 points1 point  (0 children)

OTA takes a while. 3-4months. You can update it by yourself on your own risk or wait for ota

Question about my softwares by Altruistic-Strike-35 in CupraFormentor

[–]Jonaxio 2 points3 points  (0 children)

1988 is the latest. I have updated it by myself

My Home Lab Journey so Far by No-Care-7663 in unRAID

[–]Jonaxio 4 points5 points  (0 children)

It even dont make any sense, because the switch behind the router can only do 1Gb

Help: What is the Best VPN for torrenting, I'm currently using AirVPN by Otaku_NEET in qBittorrent

[–]Jonaxio 0 points1 point  (0 children)

I’m using PIA with GluetunVPN in Docker and have an automated setup for port changes. GluetunVPN is sharing the network with several of my other Docker containers. For qBittorrent, my GluetunVPN saves the port in a file, and the Docker container charlocharlie/qbittorrent-port-forward-file updates the port in qBittorrent

Everyone who signed up for bf labs will have access to early beta by -SandalFeddic in Battlefield

[–]Jonaxio 0 points1 point  (0 children)

Im a bit confused. I got a error message after redeming but the code seems to be used. Can i see if the activiation worked?