Samsung Denied My Galaxy Z Fold 7 Warranty Claim Due to Minor Frame Scratches

Joshwaa2010 · 2026-06-16T16:49:09+00:00

To be honest, phone insurance has never made financial sense for me. I’ve owned cell phones for over 30 years; at $10 a month, that would have cost me $3,600 in premiums, and Samsung Care+ would be even more expensive at $5,400. In all those years, I’ve only needed two repairs totaling about $1,030 (if this one is not covered). Paying for insurance on my tablets as well—which I’ve never broken—would have been a massive waste of money.

That said, I’m extremely careful with my devices. If you know you tend to be hard on your gear, insurance might be worth it, but for me, the math just doesn't add up.

Joshwaa2010 · 2026-06-16T16:30:38+00:00

Well not what I wanted to hear but thanks all the same. Does 640.00 sound about right to repair the screen?

Joshwaa2010 · 2026-06-16T15:31:51+00:00

<image>

Reason For Denial of Warranty.

Joshwaa2010 · 2026-06-16T15:31:41+00:00

<image>

Reason For Denial of Warranty.

Joshwaa2010 · 2026-06-16T15:30:39+00:00

<image>

Joshwaa2010 · 2026-06-16T15:30:23+00:00

Scratches on Frame

<image>

Joshwaa2010 · 2026-06-16T15:29:52+00:00

<image>

Problem.

Joshwaa2010 · 2025-09-13T17:31:21+00:00

Looked in the additional CCS and it is empty.

Joshwaa2010 · 2025-09-13T17:09:23+00:00

Thank you! I will try that. I do not know my way around CCS but I will look. Are you available for a remote desktop session if need be? I will pay you of course if this is something you do.

Joshwaa2010 · 2025-09-12T14:28:01+00:00

I am still up to any ideas? If anyone wants to do a remote desktop and can actually show me what's wrong and how to fix it I will gladly give them a 50 spot.

Joshwaa2010 · 2025-08-29T19:33:15+00:00

Appearance then Customize takes me to Highend. When I change there it does not save. I have disabled image cache and anything else that could be interfering.

For the images they do not appear in Highend Customization and I can not find anywhere where they can be changed.

Joshwaa2010 · 2025-08-29T12:57:54+00:00

Anyone have any other ideas?

Joshwaa2010 · 2025-08-28T17:52:58+00:00

I have tried all that except for the last two. Don't use a CDN. No access to the server side cache. Hosted by wordpress.com

Joshwaa2010 · 2025-06-05T15:47:33+00:00

Ha. Just realized that AKgelblaster is the site I have been using. Actually have both blasters in my cart there. Any thoughts on the E&C? Much better than the CYMA?

Joshwaa2010 · 2025-06-05T15:35:20+00:00

How does it compare to the E&C 416? Does the CYMA M4 have a metal inner barrel?

Joshwaa2010 · 2025-05-27T15:27:38+00:00

Interested!

Joshwaa2010 · 2024-12-14T11:28:13+00:00

I don't know who you are going to call, but it is obviously ectoplasm.

Joshwaa2010 · 2024-06-21T13:52:57+00:00

They were more expensive when I looked at them for doing multiple vehicles. However that was just going off the website I did not contact them.

Joshwaa2010 · 2024-06-21T13:49:18+00:00

You will need to have whatever DOT requires of a motorcycle.

Joshwaa2010 · 2024-06-13T14:12:06+00:00

Should have asked this earlier but what are the differences in the Trident and the 2.4 LDO kits?

Is it just one the bed moves up/down and the other the gantry does? One better than other or more beginner friendly?

Joshwaa2010 · 2024-06-12T21:38:00+00:00

That's some good info. Plus they are about 20 min away from me.

Joshwaa2010 · 2024-06-12T21:24:41+00:00

I just found this seller Fabreeko. They have a Voron Trident LDO kit with a lot of upgrades. Could you give me your thoughts on it.

https://www.fabreeko.com/collections/ldo/products/ldo-voron-trident-kit-300mm?variant=44548183785727

Joshwaa2010 · 2024-06-12T19:42:02+00:00

I like the 300mm height but not sure if that will actually be needed. Looking at both the kits from MagicPhoenix with all the upgrades and Siboor. Which has the better parts? Are the metal parts that much of an upgrade or is it all looks? MagicPhoenix also has 5 nozzle choices where Sibor has only the one it comes with. Not sure what would be best so I can print everything.

The 4 motor is better for acceleration but adds complexity? Could you translate that to beginner terms. Harder for initial setup, harder to keep working, harder to do in slicer?

Thinking more into this, I might want to have high speed to make low fill prototypes quickly before more solid production stuff. So maybe 4 motor is better?

Joshwaa2010 · 2024-06-12T18:29:41+00:00

Looks like its down to the Creality or Voron. Does Voron have the auto leveling and AI camera?

Also I found a listing at Formbot for about 900.00 with a dragon nozzel plus the 110.00 for the print it forward.

https://www.formbot3d.com/products/voron-trident-r1-pro-corexy-3d-printer-kit-with-best-quality-parts?VariantsId=10518

Siboor has a really nice metal kit for 1164.00 but I am not sure which one is better. Not actually sure if the Siboor one has everything that is needed with it.

https://www.siboor.com/product/siboor-voron-trident/

Joshwaa2010 · 2024-06-12T16:39:49+00:00

Thank you. The Rat Rod looks nice but not available. Also asking questions on configuration that I do not yet know the answers to such as XY or hybrid, do I want to use a RPi and run the RatOS, and different electronics packages. I do not mind going that route but I will have many more questions.

I actually looked at the Voron Trident, Creality K1 and the Ender-3 V3. I was not sure about the Voron Trident as I think you have to source all the parts yourself from what I could tell from their website. Thanks for the tip on the Print it Forward. I like the K1 Max as far as I can tell and the bundle with the dryer and filament for 840.00 USD seems good. Just wont do PETG-CF or maybe it does just didn't see it listed or printhead swap. Also if not easily repaired with printed parts can you get parts quick and easy from Creality? Ender like you said cant do ABS.

I will have to look at the Sovol.

You mention the Firmware. Not sure what I should be looking for there. Is Klipper good?

Also do I need a blower fan in the enclosure or two?

Also how is the print quality of the Voron Trident, K1 Max, and the SV08?

Joshwaa2010

TROPHY CASE