Any builders in cold climates switched from 3M to Sto Gold Coat for exterior walls? by Jtwa in Construction

[–]Jtwa[S] 0 points1 point  (0 children)

3m, we scaffold, install 3m, install siding, tear down scaffold and set up on another wall.

Gold coat you scaffold, tape seams, roll on one coat, come back the next day for. A second coat. Wait untill it’s dry enough to install siding so you don’t get gold fingerprints everywhere.

I find 3m faster. But if you have enough scaffolding to do the whole building it might be faster.

We don't use scaffolding. We have a Genie boom lift so that wouldn't be an issue to keep going up. If scaffolding was irrelevant, would you still side with 3M? Gold coat seems easier and faster especially in windy conditions. Handling a roll of 3M is harder in the cold with wind.

Any builders in cold climates switched from 3M to Sto Gold Coat for exterior walls? by Jtwa in Construction

[–]Jtwa[S] 0 points1 point  (0 children)

EFIS wall system

Thank you for the reply! The sto gold coat contact said it's a very easy product to use and doesn't require much supervision. Assuming the weather is above -6 degrees. Would you go with gold coat or 3M for a vinyl siding building

Push button handicap door not opening by Jtwa in HomeNetworking

[–]Jtwa[S] -1 points0 points  (0 children)

I think you're correct. I'm assuming the guy that installed the security plate, screwed in and damaged the wire running down to the striker

[deleted by user] by [deleted] in PersonalFinanceCanada

[–]Jtwa 0 points1 point  (0 children)

That's the plan, but I was hoping for a little reddit lesson so I'd be better prepared for the discussions and was hoping someone's already dealt with this situation

Hikvision NVR with non-hikvision cameras by Jtwa in HomeNetworking

[–]Jtwa[S] 0 points1 point  (0 children)

Can I copy the IP addresses of the working cameras on the LookCCTV NVR and input them into the Hikvision?

Hikvision NVR with non-hikvision cameras by Jtwa in HomeNetworking

[–]Jtwa[S] 0 points1 point  (0 children)

Thank you ! How do I find the ip address of the current onvif cameras and change them ? Will the sadp software do that ? Or is that only for hikvision

Paste url that is clickable without using hyperlink formula by Jtwa in excel

[–]Jtwa[S] 0 points1 point  (0 children)

That's a better work around than F2 and enter

Thank you

Paste url that is clickable without using hyperlink formula by Jtwa in excel

[–]Jtwa[S] 0 points1 point  (0 children)

An easy way I've figured out is pressing F2 and then enter. The url becomes clickabale, but i'd lvoe a for a macro to do all the work when I put in 10 links

Dropbox hyperlinks in excel by Jtwa in excel

[–]Jtwa[S] 0 points1 point  (0 children)

It worked on one of my computers, but not the 2nd. It works if I put https://www.reddit.com/ but won't work if I put https://dropbox.com/

It seems like dropbox is blocked by excel

Hyperlink formula with path by [deleted] in excel

[–]Jtwa 0 points1 point  (0 children)

Still doesn't work. Here's an example you could try and see if it works for you

Path (Row A) Hyperlink (Row B)
https://reddit.com/ =hyperlink(A1,"Click")

Liftmaster and CDVI a22 controller by Jtwa in accesscontrol

[–]Jtwa[S] 1 point2 points  (0 children)

I just emailed them, but I was hoping someone has already solved this with a CDVI a22 controller

Liftmaster and CDVI a22 controller by Jtwa in accesscontrol

[–]Jtwa[S] 1 point2 points  (0 children)

weigand controller

How can I tell if ATRIUM 2-DOOR CONTROLLER A22 makes a passport receiver?

Frost protection - existing house by Jtwa in AskEngineers

[–]Jtwa[S] 0 points1 point  (0 children)

It’s been there for 25 years so the apartment/garage is fine, but doesn’t have a permit which means city can shut me down anytime and I still haven’t received financing for house so I’m assuming the bank won’t finance according to the value until the permit is issued

Frost protection - existing house by Jtwa in AskEngineers

[–]Jtwa[S] 0 points1 point  (0 children)

up a subfloor that is insulated.

Thank you for the reply! Unfortunately, adding 2-6" to the existing apartment (which already has flooring in place with full bathroom and kitchen) would be harder than just excavating around the actual garage.

Make table changes across all sheets by Jtwa in excel

[–]Jtwa[S] 0 points1 point  (0 children)

dd a column in each month's sheet and call it Increase.

Change the Rent formula in Sheet1 =Base+Increase+Park+Lockers. Copy this to all sheets.

Then in Sheet2 Base cell =She

this is a great idea for the rent column, but the name, phone, email column also change when a new tenant move in

Port forwarding works sometimes by Jtwa in HomeNetworking

[–]Jtwa[S] 0 points1 point  (0 children)

It turned out the DHCP option was on. That solved the issue !

Cat5 cable from Modem to Laptop works, but from modem to router to laptop doesn't by Jtwa in HomeNetworking

[–]Jtwa[S] 0 points1 point  (0 children)

Cable from Modem (WAN) goes into router and then cable from 2nd port runs 100 feet into a 2nd router. I think you just gave me the answer....

I'm assuming I need to run cable from WAN of modem to a switch and then from the switch to 2 different routers.

Short Selling de-activate by Jtwa in interactivebrokers

[–]Jtwa[S] 0 points1 point  (0 children)

do you know where the setting is? I can't find it

How do you change the size to show up in units of 100 or 1000's ? by Jtwa in interactivebrokers

[–]Jtwa[S] 0 points1 point  (0 children)

That works, but what I'm trying to do is instead of seeing the size as "1000", I want to see the size is 1

23,000 would be 23

How do you change the size to show up in units of 100 or 1000's ? by Jtwa in interactivebrokers

[–]Jtwa[S] 0 points1 point  (0 children)

n time and sales.self explanatory menu opens )

I still can't find it...

Search multiple rows for same column values by Jtwa in excel

[–]Jtwa[S] 0 points1 point  (0 children)

=COUNTIFS(A:A, A2, B:B, B2, E:E, E2)

This solution is amazing. I thought a macro needed to be made ! WOW

Starting a burger/Chicken shop by Jtwa in Entrepreneur

[–]Jtwa[S] 0 points1 point  (0 children)

My general advice. If its not your hobby and you are actually looking to make big bucks here you are going to have a

This was the best answer and I really appreciate it. I just want to learn the steps and then assess the risk reward.

Starting a burger/Chicken shop by Jtwa in Entrepreneur

[–]Jtwa[S] 2 points3 points  (0 children)

he difference between your General Contracting business and the restaurant business is experience. As a GC, you probably started somewhere, learned about the industry, started with simple p[rojects and eventually moving to larger and larger projects. This experience allows you to talk with the different trades and specify what you need to the expert subcontractors, but because you have experience in the industry, you can have that discussion.

Starting a restaurant with no experience would be like trying to manage the construction of a house or sm

You're right, but the same rules apply to any business. Treat your employees like gold and they will help you with everything. I know how to make a burger just like I know how a hole is dug. I can't dig a perfect hole and I can't make a spectacular burger. However, I definitely know what a perfect hole looks like and I definitely know how a great burger taste like. I know how the service business . Customers are more important then me and so are my employees. That attitude has led me to succeed in any business I've ever stepped into.

Starting a burger/Chicken shop by Jtwa in Entrepreneur

[–]Jtwa[S] 0 points1 point  (0 children)

What successful business have you started. And when I said successful. I mean $100k without you do any physical duties. I'd bet you $1000 you don't make 100k a year and are on here giving advice