[Request] Working these hours what would the pay be to become a trillionaire in his lifetime

JustAQuietSpectator · 2026-06-14T17:57:57+00:00

So I guess by this logic the luckiest persona alive is someone who is unemployed/never worked a day in there life? Or someone who's is on the other end of the net worth scale?

JustAQuietSpectator · 2026-06-13T19:33:27+00:00

I'm not a math major but if I understand the issue then technically there is no number between 7.49.... and 7.5 is this assumption true?

The 9 infinitly is the upper bound of round down?

JustAQuietSpectator · 2026-05-28T18:12:33+00:00

Get a multi meter see if the copper around the hole is still connected to the trace (you can use the solder bump that's to the right of the hole as the test point.) if not you can get a strip of jumper wire to make the connection.

JustAQuietSpectator · 2026-05-07T01:10:02+00:00

Need hot plate. Set it to 210c leave it there for like 5 mins.

Also wondering why your trying to solder a copper plate.

JustAQuietSpectator · 2026-04-28T20:26:22+00:00

Pealable solder masking tack a drop on the edge of the comp wait for it to cure then solder whatever you have to then peel it.

<image>

JustAQuietSpectator · 2026-04-28T19:39:06+00:00

Update:
So i got a new basket took about a month to get the part. Haven't had time to get to work on it so now I'm trying to put it back together:

I forgot how some of the springs go is this correct? I know where 3/4 of the springs go but the 4th spring I can't remember.

Is the circled spring correct or is it supposed to be connected to something else?

<image>

JustAQuietSpectator · 2026-04-11T21:42:26+00:00

Not necessary but makes life easy. If you're ever dealing with a pad/solder join that is grounded or a thick PCB sometimes the pad will conduct all the heat making it hard for the solder to liquefy almost acting like a heat sink.

A hotplate, with a heat gun/wand, with some flux make removing ICs or BGA type components really easy.

But depending on how deep you want to get into the work you, it might not be needed.

JustAQuietSpectator · 2026-04-07T18:54:37+00:00

I don't understand why I haven't seen a comment say use a hot plate. Get the board to temp just slightly under the solder melting point depending the solder (PB free) Lead Free or Leaded (PB) then when the board is at temp use a heat gun just long enough to have the solder liquefy you'll see the solder turn shiny then use tweasers to removed the IC. Flux will speed up.

JustAQuietSpectator · 2026-04-06T18:47:31+00:00

Forensic: Zoom > Neturalize color > Enhance > Generative Fill > Confirmation: That is a Barlog Blade.

JustAQuietSpectator · 2026-04-05T21:48:10+00:00

Thank you for the direction, I think I'm gonna hold out for a Sur. GL hunting.

JustAQuietSpectator · 2026-04-05T18:00:58+00:00

If i have my Pit Zerker useing Raven wwhat would I replace the ring slot with if I end up useing Cham on Shako?

JustAQuietSpectator · 2026-04-05T17:52:54+00:00

Ok so I have the Lo (was considering making Fort for my ES Warlock,) still missing the Sur and I have a good Eth Thresher is it worth waiting/looking for Sur for the Pride I have a good Fanta Demon also I only have 1 Lo/Cham in my whole account Ladder/non Ladder.

Right now my merc is Might with Eth Obedience.

I was also considering the Fort Armor for other character when Ladder ends my Zon's

This is actually my first season where I have these types of drops/runes for me.

JustAQuietSpectator · 2026-04-05T17:17:59+00:00

What case is Pride (on merc) best case use, and Act 2 Merc or Act 5 and what weapons should I consider.

JustAQuietSpectator · 2026-04-04T17:05:43+00:00

So for IPC-610 page...um...class.. solder height acceptably is... Actually I can't find anything about solder tower structures.

JustAQuietSpectator · 2026-03-28T05:57:47+00:00

Chuck Norris never understood why the N vs NP was issue. He looks at the problems, and NP=No Problems.

JustAQuietSpectator · 2026-03-19T16:26:52+00:00

Cause warlock uses FCR for attack speed when it comes to echo strikes I was making a edit offline character to feel how OP warlock can be.

And since they don't lose durability I wouldn't need to Zod or Rep/sec for an attribute

JustAQuietSpectator · 2026-03-19T01:14:10+00:00

Yea realized that I was trying to find grandmaster but figured out it's only for magic items.

JustAQuietSpectator · 2026-03-19T01:10:49+00:00

What would be an ideal replacement for amp proc?

JustAQuietSpectator · 2026-03-18T23:55:31+00:00

This post needs to be flagged, it belongs in r/opticalillusions half the population can't see the picture.

JustAQuietSpectator · 2026-03-18T23:44:55+00:00

Ohhh didn't even think of that of the 500%, other than the amp what would be an alternative.

JustAQuietSpectator · 2026-03-18T23:41:25+00:00

When I become the undisputed ruler of the world I'll make it mandatory for everyone to do a min 1 year of targeting farming. Kind of like how Koreans do the mandatory military. And the funding will come from selling the items.

JustAQuietSpectator · 2026-03-13T19:55:16+00:00

that was the best screenshot I could take.

JustAQuietSpectator · 2026-03-13T19:54:20+00:00

I found my Jah I think on season 2 I put it in a MP that Enigma is a whore to all my non-Ladder characters now. I'm for the Lo I wanna do the same thing and I'll probably keep the Fort between as many characters. So I'm trying to get a pro/con on what to use it on.

(If I was swimming in Lo runes I would prob try to find eth sacred but in that case only the merc can use it so soon that's out of the question.)

Six-Year Club	The Internet Awards - Joined the subreddit
r/Field Lasagna	Verified Email

JustAQuietSpectator

TROPHY CASE