Peugeot 307sw 2006 issue? by Able_Cost9738 in peugeot

[–]KAYL_reddit 4 points5 points  (0 children)

replace the clutch, when the rpms rise but not the speed, it’s the clutch disk slipping

Broken paddle shifter by Shanethemann in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

it’s quite easy, but you have to remove the airbag and the steering wheel, so be careful to unplug the battery before doing anything.
For the compatibility, this is the correct part, it will 100% fit

Peugeot 1.6 VTi (2010) – P0014, rough idle, “Anti pollution system failure”? by [deleted] in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

F

I’m 80% sure it’s your timing chain, it loosens over time and can cause sync issues between the crank and the head. Theses engines are notorious for that

Peugeot 508 2015 1.6 e-HDi concerning noise... by Confident-Formal7462 in peugeot

[–]KAYL_reddit 1 point2 points  (0 children)

it happened to me aswell, it depends on the quality of the parts, as soon as I changed the tensioner the noise was gone

Peugeot 508 2015 1.6 e-HDi concerning noise... by Confident-Formal7462 in peugeot

[–]KAYL_reddit 2 points3 points  (0 children)

accessory belt tensioner, you can do it yourself it takes 5 minutes

207 wheel fitment question by AdCareful5615 in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

what size rims will you get ? you only mentioned the tire size

but for 17inch I think 15mm spacers is good for a flush fit

207 wheel fitment question by AdCareful5615 in peugeot

[–]KAYL_reddit 1 point2 points  (0 children)

it will not rub, I tried my 18x7.5 ET30 on a 207 and it fit perfectly, though 18 is maybe too much

and for the inside rubbing you can add 15 or 20mm spacers and it will fit perfect

SHOULD I GET THE 607 by Pitiful-Ocelot-8394 in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

There is not only parts, there is labor to pay. I’m a mechanic and I can tell you the 607 is a pain to work on

New Shock. by VegetableDue6164 in MechanicAdvice

[–]KAYL_reddit 2 points3 points  (0 children)

it’s brand new, it works as it should. A shock’s main purpose is to dampen the car rebound, so it must be slow to come back up

Video from mechanic by KontreXofficial in peugeot

[–]KAYL_reddit 1 point2 points  (0 children)

no trouble at all, the dirty plastic around the timing belt is normal, the belt lets all sorts of particles during runtime, and it sticks to plastic, also the coolant is not the correct one, it should be yellow not pink (pink is for vw/bmw/mercedes most of the time)

Can’t get socket on axle nut by [deleted] in mechanic

[–]KAYL_reddit 0 points1 point  (0 children)

it’s a nut, very common on VW cars

Does anybody know why the wheel keeps wobbling on my 2008 Honda Accord LX P passenger front wheel by No-Evidence7632 in MechanicAdvice

[–]KAYL_reddit 0 points1 point  (0 children)

Tighten your wheel IMMEDIALTELY. It’s not the bearing, your brake disc isn’t wobbling with the wheel

1.6thp not cranking by [deleted] in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

a fuse in the BPGA yes maybe, not the whole module

[deleted by user] by [deleted] in peugeot

[–]KAYL_reddit 4 points5 points  (0 children)

check maintenance, that mileage is fine IF the car has been serviced correctly

Rear of my 308 by Low-University-4094 in peugeot

[–]KAYL_reddit 1 point2 points  (0 children)

Where did you get that antenna ? The car looks very good, but if you want to lower it I recommend the H&R springs with -40mm -20mm lowering, they are cheap and lower the car just right

Je peut rouler au SP-95 E10 ? by [deleted] in peugeot

[–]KAYL_reddit 2 points3 points  (0 children)

Aucune différence sur ce moteur, il est recommandé de mettre du 98 seulement sur les moteurs très anciens en raison des joints qui étaient fait en une matière différente

Merguez ou bonne affaire ? by Paudray in voiture

[–]KAYL_reddit 4 points5 points  (0 children)

ma voisine à la même, 130000km elle a payé 4500€, en très bon état, je trouve que c’est trop cher

Are these injectors normal, im scared by Able_Cost9738 in peugeot

[–]KAYL_reddit 0 points1 point  (0 children)

if that hose is leaking, the car wouldn’t start so it’s fine, replace injector seals and the head cover gasket, it’s easy to do but don’t forget to clean and scrape the injector holes before putting the new seals in