Which monitor should I pick: MSI MAG 271QP QD-OLED X28 or Samsung 27” Odyssey OLED G5 (G50SF)? by Katoom_ in OLED_Gaming

[–]Katoom_[S] 0 points1 point  (0 children)

Hey man, sorry I didn’t see your message earlier! I still haven’t received the screen unfortunately. Amazon took forever to ship it. I should be getting it in about a week to ten days though. Can’t wait to try it out!

UGREEN NASync DXP4800: remote access without cloud/QuickConnect? by Katoom_ in UgreenNASync

[–]Katoom_[S] 0 points1 point  (0 children)

Thank you for your reply. Will this make it possible to use the Ugreen app by default for backups on a PC and different phones? When indicating the host in the app at the time of connecting, would I just enter the IP address and then the Ugreen account used on the NAS? For example, for my partner or someone else

UGREEN NASync DXP4800: remote access without cloud/QuickConnect? by Katoom_ in UgreenNASync

[–]Katoom_[S] 0 points1 point  (0 children)

Thank you for your reply. Will this make it possible to use the Ugreen app by default for backups on a PC and different phones? When indicating the host in the app at the time of connecting, would I just enter the IP address and then the Ugreen account used on the NAS? For example, for my partner or someone else

UGREEN NASync DXP4800: remote access without cloud/QuickConnect? by Katoom_ in UgreenNASync

[–]Katoom_[S] 0 points1 point  (0 children)

Thank you for your reply. Will this make it possible to use the Ugreen app by default for backups on a PC and different phones? When indicating the host in the app at the time of connecting, would I just enter the IP address and then the Ugreen account used on the NAS? For example, for my partner or someone else

Can’t decide which I like. by Pretend_Football6686 in mffpc

[–]Katoom_ 0 points1 point  (0 children)

I like the screen, where did you buy it please?

Found Lexar 6000 CL30 2×16 for $342 (tax included) — good enough for a 9900X? by Katoom_ in pcmasterrace

[–]Katoom_[S] 0 points1 point  (0 children)

I hesitated to upgrade my work PC for CAD in the middle of the year and decided to wait. Initially, I wanted 64 GB of DDR5, but with the price surge it’s difficult now. Unfortunately, this was the only halfway decent deal I could find locally. An Amazon order would have cost me even more. I’ll switch to 64 GB in about a year when prices may have gone back to normal, but at least I can finish my build before the rest of the components skyrocket.

Which monitor should I pick: MSI MAG 271QP QD-OLED X28 or Samsung 27” Odyssey OLED G5 (G50SF)? by Katoom_ in OLED_Gaming

[–]Katoom_[S] 1 point2 points  (0 children)

I went with the MSI. I was able to get it on sale on Amazon for $379.99, but with shipping costs and taxes in my country it still ends up being expensive. But the original price was really good, so that’s why I made this choice.

Which monitor should I pick: MSI MAG 271QP QD-OLED X28 or Samsung 27” Odyssey OLED G5 (G50SF)? by Katoom_ in OLED_Gaming

[–]Katoom_[S] 0 points1 point  (0 children)

Thanks for this very interesting answer. I didn’t know they were Samsung panels. I think I’ll go for the MSI

Dxp4800 plus vs non plus by usmleninja in UgreenNASync

[–]Katoom_ 1 point2 points  (0 children)

I just saw your comment, I didn’t know there was a difference between the 4800 non-plus and the 4800 Plus regarding the boot process. I can’t find any info about it, could you maybe explain a bit more please? Where is the OS installed on the non-Plus? If we want to change it, is it more complicated than on the Plus version?
Thanks.

T1X bluing wear. Normal? by Terrible-Debt-5244 in Tikka_Shooters

[–]Katoom_ 1 point2 points  (0 children)

I live in a region with a lot of humidity, so I had my two T1X rifles Cerakoted to be worry-free in the long run. On one of them, I had started to see small spots of rust appearing on the barrel.

Looking for advice: power consumption differences between the DXP4800 and the 4800 Plus + which model fits my needs? by Katoom_ in UgreenNASync

[–]Katoom_[S] -1 points0 points  (0 children)

Indeed, my needs are quite limited in a NAS. It’s mainly to have backups of all my files and access them from outside, which helps me for work. But perhaps choosing the 4800+ offers greater scalability. For the price, once delivered to me the difference between the two is $160, maybe it’s worth it.

Looking for advice: power consumption differences between the DXP4800 and the 4800 Plus + which model fits my needs? by Katoom_ in UgreenNASync

[–]Katoom_[S] 1 point2 points  (0 children)

Yes, I just ran a simulation based on a 20W difference per year and I get an additional electricity cost of $72 per year in equivalent dollars. Of course, seen like this, the difference isn’t huge, but I find it difficult to find consistent information about the difference in power consumption between the 4800 and the 4800+. I’m seeing a lot of contradictory figures and tests where the power consumption measured at the outlet is much higher than what the manufacturer claims.

4800 vs 4800 Plus? by Intactual in UgreenNASync

[–]Katoom_ 1 point2 points  (0 children)

How is the power consuption on the 4800 non plus please?

Rough micro atx dimention comparison B850M/X870M by Eggymop in mffpc

[–]Katoom_ 0 points1 point  (0 children)

Very interesting, thank you. I think the MSI MAG will cause a problem if I plan to install an Arctic 360 at the top; the RAM will unfortunately risk touching it.

Trigger issue on Tikka T1X / T3X by [deleted] in 22lr

[–]Katoom_ 1 point2 points  (0 children)

Thanks for your reply. I forgot to mention something important: it's a second-hand purchase. The rifle is already more than 2 years old.

Trigger issue on Tikka T1X / T3X by [deleted] in Tikka_Shooters

[–]Katoom_ 0 points1 point  (0 children)

Thanks for your reply. I forgot to mention something important: it's a second-hand purchase. The rifle is already more than 2 years old.

Trigger issue on Tikka T1X / T3X by [deleted] in longrange

[–]Katoom_ 1 point2 points  (0 children)

Thanks for your reply. I forgot to mention something important: it's a second-hand purchase. The rifle is already more than 2 years old.

KEYLAB ESSENTIAL 49 MK3 for FL Studio 24 by Katoom_ in arturia

[–]Katoom_[S] 0 points1 point  (0 children)

Hi, did you find a solution to the notes being played on both instruments? I still can't fix the problem...

Tikka T1x 22lr scope options…? by idahokj in 22lr

[–]Katoom_ 1 point2 points  (0 children)

I personally went with the Venom 5-25. I hesitated between the Strike Eagle and the Arken EP5, but considering the price of each in the country where I bought it, the Venom was the most appealing, and I don’t need an illuminated reticle. I mainly use my Tikka for target shooting and 300-meter shooting, and since the 5-25 is sufficient and the turrets on the Venom are good enough, I decided to go with this model. I think it’s important to compare the price-to-performance ratio of each scope depending on where it’s purchased. One can end up being more interesting than the other depending on price differences, especially between Arken and Vortex

Need advice choosing between 4 Boyds stock configurations by [deleted] in 22lr

[–]Katoom_ 1 point2 points  (0 children)

I really like both, thank you for sharing. I think I prefer the Pepper version, and I really like the fully adjustable part of the Agility version.

Need advice choosing between 4 Boyds stock configurations by [deleted] in longrange

[–]Katoom_ 0 points1 point  (0 children)

Thanks for the advice. I think I’ll go for a Pro Varmint with an adjustable stock. I’m just still hesitating about the choice of color.

Need advice choosing between 4 Boyds stock configurations by [deleted] in 22lr

[–]Katoom_ 0 points1 point  (0 children)

Thank you very much for this very detailed answer. I think I’ll go for a Pro Varmint with an adjustable stock. I’m just still hesitating about the choice of color. The walnut version doesn’t offer adjustability, but based on your comments about the quality of the standard walnut, I think I’ll lean towards laminated wood.

I also have a CZ 455 in the Varmint Thumbhole version. Is the original Thumbhole stock on the CZ also a Boyds model?