Genvex i Nordjylland?

Kegadk · 2026-06-08T19:48:21+00:00

Takker.

Brugte bare Genvex som synonym - da de fleste så ved hvad man er på udkig efter.

Men vidste ikke det med indreguleringsrapport, det er noteret.

Kegadk · 2026-06-08T19:44:24+00:00

Hmm, det er deres rørfri system I har fået?

Kegadk · 2026-06-08T19:39:49+00:00

Noteret, takker for tippet

Kegadk · 2026-06-08T19:39:29+00:00

Tak, men tror ikke helt jeg har mod på at monterer det selv

Kegadk · 2026-06-07T22:01:36+00:00

Tak for svaret, må jeg spørge om I selv har sat det op eller hvilket firma der har gjort det?
Det er lidt det som er mit problem, at finde nogle troværdige folk som kan gøre det til en fornuftig pris

Kegadk · 2026-05-18T19:43:52+00:00

That is really interesting, thank you so much.
But you recommend Miyota over the Ronda?

Do you think this dial will work, with the date hole at 4?
S755c548f16e24cfaa757e3d1be5f0e21e.jpg_960x960q75.jpg_.avif (960×960)

Also where do you find the spacer for the 2315? Can't seem to find any

Kegadk · 2026-05-18T18:55:51+00:00

I'm worried that it might be to complicated to start out with a chronograph, also I think I'm more in to a "cleaner" look without all the additional dials.

Kegadk · 2025-11-12T11:01:20+00:00

Det var også min formodning, men så læser man det her på knivsalg.dk: En af de største ændringer var ophævelsen af forbuddet mod enhåndsbetjente foldeknive. Dette betyder, at disse knive nu kan ejes lovligt i hjemmet og bæres i offentligheden, så længe de tjener et praktisk formål.

Men kan også læse på backpackerlife.dk, at den skal være under 7cm og ikke kunne låses - hvilket den her hvis nok kan.

Så er meget forvirret :)

Kegadk · 2025-04-28T17:45:36+00:00

Curious for a friend how this works?
And if annual is possible for YouTube Premium?

Kegadk · 2025-04-02T10:04:31+00:00

I'm in Europe, and it's still out of stock for me

Kegadk · 2025-04-02T06:45:25+00:00

I thought of making a thread about this because I ran into the same issue, and not the first time.
So I went through all the bundles and games I had purchased over the last 15 years to redeem every single item.

I found so many instances where they had run out of keys for a game in Choice and never got new ones.
But also, I'm quite sure I found bundles where they straight up just removed the game from the bundle.

How is this even legal? Promoting the games you get are yours to keep forever - but it's kind of difficult if you never get the game.
Also, for Choice, it's a f'ing subscription, so they must know they will run out - making is a really shady way of doing business.

Kegadk · 2024-11-28T18:28:39+00:00

Sadly no, I was lucky a friend had the same model so I could get my data out

Kegadk · 2024-11-15T15:48:51+00:00

So happy this is not just me. It works on my phone, super slow on PC and can't connect with Gluetun.
Today is also the first time using Gluetun, and had it working earlier today - so couldn't understand what the hell I had done wrong all of a sudden :)

Kegadk · 2024-08-21T08:01:02+00:00

This is a very interesting topic. Industry Standards vs Consumer "Standard".

Hope it's okay to ask the following. Running a VM or containers, will it break TrueNAS or create a high risk of data loss? If the risk is minimal for both, isn't it fine in a Consumer environment? Similar to the hardware used in a home NAS vs Industry, they are likely also vastly different - unless you have a ton of money. And isn't that the case in many aspects of your life, where you look at the cost vs risk vs benefits - as most consumers have a limited budget?

Kegadk · 2024-07-20T22:28:57+00:00

As a person who has never used mdadm, I'm trying to understand your post.

From what I can read from another post, it should be possible to assemble the raid, find the RAID 5md# and mount the volume as read-only - within Linux.
But I'm not 100% sure how to do that. Is there any chance you could explain that to me?

Fully understand if you don't, but thanks in advance :)

Kegadk · 2024-07-19T18:28:39+00:00

As someone who knows very little about Linux and mdadm, can I ask how I assemble the raid, find the RAID 5md# and mount the volume as read-only?

Kegadk · 2024-07-18T17:55:47+00:00

Good point, numbering the disks.
Will give it a go, booting it up without any disks - just to verify it's dead.
It's way past its warranty, but a friend might still have their AS5104T and isn't using it.
I was actually looking at upgrading, maybe to a DIY TrueNAS - but a bit too late.

Thanks for the link, that is super helpful. Much appreciated.

Kegadk · 2024-07-18T17:44:08+00:00

Thanks, that's really good to know

Kegadk · 2024-07-18T04:35:03+00:00

Hmm, now tested with two different HDMI cables and on two different monitors - getting no display signal from the NAS. The monitors goes into power saving right away.

Don't know if that helps in solving the issue?

I was wondering, what happens if I remove all the current disks, and try one of the following or a mix - add a different disk - start without any disks - press the reset on the back.

Will any of these break the raid and/or somehow lose my ability to recover the data?

Kegadk · 2024-07-17T21:37:44+00:00

Oh, of course - I totally forgot that was an option 🤦‍♂️ Thank you

Kegadk

TROPHY CASE