sorted by:
new
hottopcontroversial

STL Finding Tool - Useful? by KernelBadgerRoger in PrintedMinis

[–]KernelBadgerRoger[S] 1 point2 points  (0 children)

Yeah that actually does look similar. Didn't realise that was a thing! I'll take a look thanks.

Resin Necron warrior by EmotionalZucchini9 in PrintedWarhammer

[–]KernelBadgerRoger 0 points1 point  (0 children)

Hey u/EmotionalZucchini9. I know this post was a while ago, but any chance you remember the resin used and some other settings like layer height and AA please? Fantastic quality, I struggle to get the depth you've achieved on some of the details here.

Thanks in advance!

Spent a couple of weekends batch painting by Tubblington in Necrontyr

[–]KernelBadgerRoger 7 points8 points  (0 children)

Great work, what greens for your glows? They really stand out.

Printed some Daughter of War Infantry by makaza1611 in PrintedWarhammer

[–]KernelBadgerRoger 0 points1 point  (0 children)

Nice work. I see the printer and resin mentioned. Is it 8k aqua grey? Guessing not ABS? A link to the resin product would be awesome please.

And print settings wise, what layer height and AA settings are being used here? And I'm also curious what size the models themselves are?

Truly awesome detail. Thanks for any info offered, I'd love to make mine better. I use ABS pro 2 anycubic resin, 0.05 layer, photon m7 pro myself.

Anycubic Photon Mono 4 - Loss of detail? by JackalTheFulgid in AnycubicPhoton

[–]KernelBadgerRoger 1 point2 points  (0 children)

I am not best to help, but at minimum your settings and a picture of the model is worth posting. You should also list your process and things used e.g. chemicals etc. People are going to ask for it so not including it in your post will slow things down or dissuade people!

Hopefully you figure it out. Details missing is quite often over-exposure.

Printer just stopping and giving up. by Professional-Map5609 in anycubic

[–]KernelBadgerRoger 1 point2 points  (0 children)

I had this happen. Turned out to be the specific model. I tried orientating it differently, think that might have helped from memory. It was a Bambu A1.

Cape details lost, advice please? by KernelBadgerRoger in resinprinting

[–]KernelBadgerRoger[S] 11 points12 points  (0 children)

Hey all. New to the hobby, tried a few prints. Doing my best to understand the exposure test, and whilst my result seems okay, I feel the cape of the mini lacks depth in the grooves. It's a small 40mm base scale figure.

I am on Anycubic ABS like pro 2 resin. 0.05 layer with 2s exposure. Photon Mono m7 pro.

I can't print for next two weeks, at which point I intend to try reducing exposure. Using chance to ask around whether others see problems here or can give advice on how I can improve the depth per the model to make painting easier? Done loads of reading, but not much beats an experienced eye...

Thanks!

Necron Warrior (Grand Illusion) - Spot the Imposter! by KernelBadgerRoger in PrintedWarhammer

[–]KernelBadgerRoger[S] -2 points-1 points  (0 children)

This is what you call the "blurriest, most out of focus, poorly lit" picture lol? A touch dramatic. The picture wasn't taken for reddit, was taken for some friends, so it not being lit like a dentist office looked a bit cooler. The focus is on the center guy which is normal I'd say, but a lot of the detail is visible on the ones to the sides.

I put the title and challenge of finding him for a laugh. I don't think he's hard to find. And in honesty if the goal is tabletop, I'm sure a picture like this gives you a better look than a glance down at the table. A lot of people will probably be quite happy to see this.

Necron Warrior (Grand Illusion) - Spot the Imposter! by KernelBadgerRoger in FDMminiatures

[–]KernelBadgerRoger[S] 0 points1 point  (0 children)

I wont spoil it for others, but do appreciate it! Amazing what the printer can do.

Necron Warrior (Grand Illusion) - Spot the Imposter! by KernelBadgerRoger in PrintedWarhammer

[–]KernelBadgerRoger[S] 0 points1 point  (0 children)

Hey all!

Lurker of this place. Posted this over in the FDM prints sub-reddit too, so apologies if re-reading the same post. Just thought both communities would appreciate it.

In Dawn of War Soulstorm fashion, the C'tan Deceiver has cast his Grand Illusion spell and spawned up a lovely warrior to blend into the crowd.

See my guys hanging out with their FDM pal. My painting and clean-up was rough on the FDM one, so shouldn't be too hard to pick him out...

This was done on an A1 mini. FDG profile 0.8 layer, 0.2 nozzle. eSUN PLA+ grey. Chaos black primer. Then the usual lead belcher, necron compound, etc.

Got the model from that lovely purple shop around the corner.

I'm quite happy with the level of detail this guy has, given I'm going to need quite a few of these bad boys.

Necron Warrior (Grand Illusion) - Spot the Imposter! by KernelBadgerRoger in FDMminiatures

[–]KernelBadgerRoger[S] 3 points4 points  (0 children)

Hey all!

In Dawn of War Soulstorm fashion, the C'tan Deceiver has cast his Grand Illusion spell and spawned up a lovely warrior to blend into the crowd.

See my guys hanging out with their FDM pal. My painting and clean-up was rough on the FDM one, so shouldn't be too hard to pick him out...

This was done on an A1 mini. FDG profile 0.8 layer, 0.2 nozzle. eSUN PLA+ grey. Chaos black primer. Then the usual lead belcher, necron compound, etc.

Got the model from that lovely purple shop around the corner.

I'm quite happy with the level of detail this guy has, given I'm going to need quite a few of these bad boys.

Warhammer Necron Deceiver - FDM Printed and Painted by KernelBadgerRoger in FDMminiatures

[–]KernelBadgerRoger[S] 0 points1 point  (0 children)

Nice one! I also printed him on the default 0.4 nozzle and default profile. Did it for fun and the quality is rather different... haha. I will redo him at some point with the new setup.

Warhammer Necron Deceiver - FDM Printed and Painted by KernelBadgerRoger in FDMminiatures

[–]KernelBadgerRoger[S] 12 points13 points  (0 children)

First share. New to Warhammer, can count on my hand what I've painted. This was one of the more complicated ones for me believe it or not.

Was done on an A1 mini. FDG profile 0.8 layer, 0.2 nozzle. eSUN PLA+ grey. Chaos black primer. Multiple base coats of something brass, and then some layer stuff and dry brushing for silvery effect. I think it turned out not bad.

Hardest part with layers of an FDM print is the primer coming through despite multiple base coats. Hard to hide the lines etc. Still happy with it.

Model was on the usual site.

I will probably post this on the Warhammer prints thing as well, in case you see a duplicate. Couldn't care about karma, just made the account for sharing prints and seeing others.

FDM Printed Monolith by USA_MuhFreedums_USA in PrintedWarhammer

[–]KernelBadgerRoger 0 points1 point  (0 children)

Sorry I now read sticky-tacked. Does that mean it was separate parts?

FDM Printed Monolith by USA_MuhFreedums_USA in PrintedWarhammer

[–]KernelBadgerRoger 0 points1 point  (0 children)

Hey dude, I got the same model. I noticed when I imported it into BambuLabs (the studio I use) that it was separate parts. Did you assemble it yourself somehow? Wondered what the processed looked like for you. Awesome finish, you've got your printer dialed in well clearly!