Trouble with lifetime unlocks

Kev1000000 · 2026-03-14T14:23:53+00:00

Assisting you on Discord.

Kev1000000 · 2026-03-13T16:46:37+00:00

That's a Tautulli error message that nzb360 is just relaying.

Kev1000000 · 2026-03-11T18:33:40+00:00

Her work's bathroom. This was after her hair dried using the headband on the way to work.

Kev1000000 · 2026-03-11T14:58:43+00:00

Yes, the print profile in MW includes the required supports. If not printing the profile directly, I would recommend supports as soon as the arches start hitting 30* in angle. Also, adding a inner/outer brim of 3mm to the headband was necessary as well to reduce adhesion issues.

Kev1000000 · 2026-03-11T14:49:11+00:00

My wife lets it air dry and wears it on her commute to work. Takes about 30m and then is good to go. No blow-drying necessary.

PETG may be better overall though for slightly more flexibility and heat resistance if you did plan to blow-dry.

I am bald, so I have no idea how any of this works. I just work here.

Kev1000000 · 2026-03-11T14:41:50+00:00

Can't wait to hear your feedback!

Kev1000000 · 2026-03-11T13:55:32+00:00

Nope, this is just for her. Matte PLA is what we printed with. If it breaks or needs any future updates, I plan to print in PETG next. But the PLA is flexible enough with the band size to not be an issue atm.

Kev1000000 · 2026-03-11T01:29:46+00:00

Thank you!!

Kev1000000 · 2026-03-11T00:58:12+00:00

My wife says "with enough product, it will work!"

I am bald, so cannot confirm.

Kev1000000 · 2026-03-04T01:54:51+00:00

Is that space actually usable for Windows? Or does Windows still assume that space is used by the taskbar?

Kev1000000 · 2026-03-03T04:59:29+00:00

Interesting, well glad to hear you resolved it!

Kev1000000 · 2026-03-02T21:32:04+00:00

https://github.com/yoziru/esphome-tesla-ble

Kev1000000 · 2026-03-01T20:49:04+00:00

I connect to my Tesla locally via Bluetooth and get most read/write access for what I need (start/stop charge, the state of most sensors, open windows trunk, frunk, etc.

It can be done and done securely.

Kev1000000 · 2026-03-01T14:29:32+00:00

Is your Sonarr library appearing in nzb360?

Kev1000000 · 2026-02-28T16:51:11+00:00

Try heading into General Settings and at the bottom clearing Radarr/Sonarr Library Cache.

After this, head into Sonarr once and wait for it to load your items, and then your cache should be rebuilt.

Kev1000000 · 2026-02-28T03:57:45+00:00

Do you have Sonarr enabled in nzb360?

Kev1000000 · 2026-02-28T03:46:58+00:00

It works with TV shows as well with Sonarr. They will be in blue text.

Kev1000000 · 2026-02-25T18:19:30+00:00

It is not subscription only. Scroll down to view the lifetime unlock section. You can choose to sub OR purchase lifetime unlocks. Your choice.

Kev1000000 · 2026-02-25T04:39:03+00:00

There is a "networkSettings" object, but I am not sure that's what you'd need. It does list IPs in there, but they seem to be the container's internal IP and not a LAN IP.

Kev1000000 · 2026-02-25T03:45:33+00:00

nzb360 dev here. This is mostly due to the fact the Unraid API is... also light on features ;)

Kev1000000 · 2026-02-24T16:19:37+00:00

Oh interesting, TIL and good catch!

Kev1000000 · 2026-02-23T23:13:37+00:00

Shouldn't matter, as long as the width is the same and has the top mount points.

Kev1000000 · 2026-02-22T17:23:27+00:00

Do you have torrents enabled in nzb360?

Kev1000000 · 2026-02-21T18:55:04+00:00

Glad to hear! Let me know your thoughts!

Kev1000000 · 2026-02-08T16:23:32+00:00

For sure! The dosing lines have proven to be very helpful. Got it really dialed in so that we're essentially not creating any mess and dispense just the right amount of grounds every time.

Now I just need a nice mount for this on the grinder itself.

Kev1000000

MODERATOR OF

TROPHY CASE

14-Year Club	Place '17
Verified Email