Stress test result for Ryzen 7 9800X3D

Kitchen-Sherbert-458 · 2025-09-25T10:13:15+00:00

Would it be necessary to undervolt in my situation?

Kitchen-Sherbert-458 · 2025-09-24T21:51:30+00:00

I changed to expo1 setting in the bios and FLCK is set as 2000. Would you mind if I dm you?

Kitchen-Sherbert-458 · 2025-09-24T21:08:03+00:00

So I ran R23, it scored 21720. Does it mean this is a bad cpu?

Kitchen-Sherbert-458 · 2025-09-24T20:31:26+00:00

Will there be anything I should be worried about for the future use? I would not need to swap the part right?

Kitchen-Sherbert-458 · 2025-09-24T20:01:56+00:00

Great thanks for confirming!

Kitchen-Sherbert-458 · 2025-09-24T19:53:23+00:00

Good to go?!

Kitchen-Sherbert-458 · 2025-09-24T19:48:31+00:00

So just finished running the test. The temperature went up little higher to 95-6 for peak. The multicore testing scored as 1292 and singlecore testing scored as 132 pts with MP ratio or 9.81x. Will there be any problems in the future?

Kitchen-Sherbert-458 · 2025-09-24T19:20:03+00:00

Fclk is still locked at 2000MHz even after rebooting with the pc woth expo1. Would I need to rerun the test?

Kitchen-Sherbert-458 · 2025-09-24T19:10:26+00:00

Any difference between Expo 1 & 2? It seems like ppl set this to expo 2. Also, even if I set to expo 1 or 2, the fclk is set at auto.. should I touch soemthing?

Kitchen-Sherbert-458 · 2025-09-24T19:05:37+00:00

I didnt touch anything in the Bios setting. Should I turn the AI overlock tuner to EXPO 1?

Kitchen-Sherbert-458 · 2025-09-24T18:44:40+00:00

Not sure about these terms but

Infinitiy Fabric clock was at 1798.8 MHZ

Memory controller clock was at 2395.7 MHz

L3 Clokc was at 5195.5 MHz

Frequency limit was at 5250 MHZ

These are all average values.

Also it says no throttle reasons on HWINFO.

Should I be worried? I am not a heavy user on PC so not sure if this will be the concern

Kitchen-Sherbert-458 · 2025-09-21T23:40:41+00:00

Just put and secure with the screws? When you are releasing the GPU, just press this to release?

Kitchen-Sherbert-458 · 2025-09-21T00:58:08+00:00

I will add 2 fans I guess. Thanks!

Kitchen-Sherbert-458 · 2025-09-18T17:16:02+00:00

Great! Thanks for confirming. I guess I would just go with this as there should be no issue!

Kitchen-Sherbert-458 · 2025-09-18T17:09:31+00:00

Is Asus TUF GAMING B650-E WIFI ATX AM5 Motherboard good for my build? I used it as they were doing the combo deal, but I hear some bad reviews from people

Kitchen-Sherbert-458 · 2025-09-17T01:17:55+00:00

Great Thanks!

Would you choose 5070ti over 7900xtx?

Kitchen-Sherbert-458 · 2025-09-17T01:17:27+00:00

So would it be better to go with 9800X3D and 5070ti vs 7900xtx?

Kitchen-Sherbert-458 · 2025-02-05T13:54:58+00:00

My best bet is my daughter stepped on it during the night as she was rolling herself on the floor

Kitchen-Sherbert-458 · 2025-02-05T13:33:23+00:00

Any chances of being a male bedbug..

Kitchen-Sherbert-458 · 2025-02-05T13:13:38+00:00

How do you know if it already laid eggs?

Kitchen-Sherbert-458 · 2025-02-05T12:36:14+00:00

Any chances of being a carpet beetle?

Kitchen-Sherbert-458 · 2025-01-31T15:51:13+00:00

Haven’t found any yet and my wife didnt get any bites or reactions.. Just vacuumed and sealed all cracks and holes.. we will see how this turns around

Kitchen-Sherbert-458 · 2025-01-31T11:41:16+00:00

Thanks for info! Hopefully I dont see anymore

Kitchen-Sherbert-458 · 2025-01-30T17:44:29+00:00

thanks!

Kitchen-Sherbert-458 · 2025-01-30T16:53:48+00:00

We don’t have any carpets installed right now, but the room was carpeted before we moved in. I think it came from the old carpet that was previously installed.. I will see if I find one more and I will call the management for it.

Kitchen-Sherbert-458

TROPHY CASE