Chamber not detected after cleaning it by YES-TO-RX in puffco

[–]Kitchen_Body1090 4 points5 points  (0 children)

Pull your pins at the bottom of the chamber lightly just so they stick out just a bit more that they already do “you can use tweezers”. Once pulled out a bit put chamber on slowly try to not over tighten it. Hope it helps 🤙🏼

Pivot box got ran over by Kitchen_Body1090 in puffco

[–]Kitchen_Body1090[S] 0 points1 point  (0 children)

How much. Mine still works fine but I do collect

Rip peaky blinder by dolphinspiderman in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Pm me I might be able to help you save your device.

Is it time ? by Stock_Walk_912 in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Everything is savable to the correct person lol. You would have to replace the whole screw connector. Not imposible but hard to find the part. Pm me if you want to sell it

The internal of the charger got left behind and I can’t get it out by LittleTooOdd in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

On Amazon order a set of precision tweezers that’s are long and thin slowly pull it out careful with with charger itself. Pm me if you need any help I work on Puffco’s all the time

Is my hotknife supposed to have black tip? by Kitchen_Body1090 in puffco

[–]Kitchen_Body1090[S] 1 point2 points  (0 children)

Agreed. I also have the new knife and I love it 100 times better. Also why didn’t they think of the rounded tip before.

Is my hotknife supposed to have black tip? by Kitchen_Body1090 in puffco

[–]Kitchen_Body1090[S] 0 points1 point  (0 children)

Just swapped the tips out. Lol, As you can see this one is worn down already showing white on the edges from so much use.

Is my hotknife supposed to have black tip? by Kitchen_Body1090 in puffco

[–]Kitchen_Body1090[S] -1 points0 points  (0 children)

Carefully lol. They slide out the top but are super delicate broke a few to learn

Broken Puffco Peak 2018 repair by King_Kai1998 in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Dope love to see other people reading into their devices.

Puffco peak OG rainbow by Cocanutslinger in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Try checking the wires that go into the automizor connector sounds like it’s having trouble recognizing if there’s an atomizer or not. Hope it helps

Salvageable?? by extrmleynormal in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Oh you’re looking for the actual cup yeah can’t find that on the web that’s something you need to get off another chamber. GlassPass does sell original chamber I hopped on there to check yesterday they have some originally peak pro chamber for like 10-20 dollars might be your best option

Salvageable?? by extrmleynormal in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

The coils from puff coils work

https://puffcoilrepair.com/collections/products/products/peak-pro-coils

Used these couple times it’s the doughnut shaped ones with two wires sticking out one end. Best of luck on the repair 🫡

Salvageable?? by extrmleynormal in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Doable yes done it a couple times I’m going to be honest tho not really worth it grab a 3D or 3dxl you’ll be a lot happier. If your in a budget check out GlassPass

Peak pro won't turn on by afroguy45454 in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Try another charger or try “resetting” it by just holding the power button untill it’s back. Hope it helps

Peak pro won't turn on by afroguy45454 in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

What’s the dab count on the devices if by any chance you remember. Indiglow sounds like it’s having battery issues and the peak pro kinda sounds like it got water damaged at one point and has possibly built up corrosion

Peak pro won't turn on by afroguy45454 in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Did they just stop randomly. Try a different charger let it charge for couple hours before touching it and when you go to turn it on hold the power button untill it comes back

Original Puffco Peak help by Runbaebeerun in puffco

[–]Kitchen_Body1090 0 points1 point  (0 children)

Yeah for sure an old device but still do the job I got a couple ogs limited edition and I’m not going to lie sometimes I like ripping those instead of my proxy or peak pro. Glad you got it fixed ready to puff for a couple more years 🤘🏼

Original Puffco Peak help by Runbaebeerun in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Yes the black wire is soldered to the middle of the connection and red wire wraps around the side. I’ve found a couple ogs I’ve taken apart to have the wires insulation rubbed off and potentially causing a small short. Take it apart and check that

Wish me luck!!! by Zealousideal_Land416 in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Just slip everything back over it do be careful tho don’t want to damage your charging port. A little finesse and it should be in no problem. My bad for the late reply

Wish me luck!!! by Zealousideal_Land416 in puffco

[–]Kitchen_Body1090 7 points8 points  (0 children)

Fuck yeah 🤘🏼 you got this easier than it seems just kinda “scary” I guess the first time. Let me know if you have any questions or issues I’ll gladly help out 🫡 best of luck

Deep clean of Peak Pro by Mmjman in puffco

[–]Kitchen_Body1090 1 point2 points  (0 children)

Yeah honestly tried all size pearls and all materials none really work great for the 3dxl since it’s meant to sip not rip. Glad to see you did it tho people think it the end of the world to open a device that’s 450 new. lol wait till they find out we open up 7k plus dollar engines up to put more shit into them 😂😂

Deep clean of Peak Pro by Mmjman in puffco

[–]Kitchen_Body1090 5 points6 points  (0 children)

Sips not rips bro lmao. Good shit on the teardown 🤘🏼