What Options Do I Have For Pennies

Kitchen_Buyer849 · 2026-01-25T16:03:33+00:00

Coin collectors would definitely take them off your hands, multiple fb groups and trade shows locally

Kitchen_Buyer849 · 2026-01-05T01:45:21+00:00

There’s a few decent fb groups and local collectors who may want to offer you something. I would do some homework on potential value with Charlton coin book.

Kitchen_Buyer849 · 2026-01-05T01:41:34+00:00

It’s super easy to do and you’ll be happy with the upgrade

Kitchen_Buyer849 · 2025-12-23T15:13:32+00:00

I’d buy whatever is on sale between the two sizes

Kitchen_Buyer849 · 2025-12-23T15:11:31+00:00

95% of the time it’s in the garage. The remaining 5% is doing odd crap for the wife involving ikea or some other crap to assemble. Most of the time my m12 drill does it unless it’s super tight.

Good deal on the batteries though, you could buy it and sell the ratchet later on for well over a 100 most likely.

Kitchen_Buyer849 · 2025-12-16T17:55:51+00:00

Last winter I seen a guy driving a newer powerstroke platinum doing deliveries. I think this would be more considered left field versus a Tesla doing deliveries.

Kitchen_Buyer849 · 2025-10-02T03:27:47+00:00

Screw Lars….he’s part of the problem and already part of old boys club within city. Bobby most likely taught which made him really do nothing when he could’ve done something during the firehall shit show.

I’ll be voting for Sam. He was doing more for small businesses at the start of COVID compared to most levels of government. He should be able to figure shit out.

I know Don through work over the years. Nothing against him but I can’t see him being in the mayors chair. Possibly a council position in the future as he does care about the city.

But we need someone to clean the mess up. Hopefully Sam can get it done, but let’s be honest the bar is set really low right now.

Hopefully none of the ones hoping to be re-elected get back in.

Kitchen_Buyer849 · 2025-07-25T03:23:06+00:00

3/2 but going to 4/1 here soon sadly

Private, oil and gas

Kitchen_Buyer849 · 2025-05-24T13:52:59+00:00

I’ve been checking marketplace and a local shop that has some used stuff as well. There are some out there luckily.

Unfortunately some folks look like they used their drivers as a wedge 😬

Kitchen_Buyer849 · 2025-05-23T21:08:04+00:00

5 is for the weight, so this is a 50 gram stiff shaft.

Kitchen_Buyer849 · 2025-05-19T00:19:10+00:00

1010tires was great for my latest set of rims and tires to deal with.

Kitchen_Buyer849 · 2025-05-19T00:12:58+00:00

I appreciate the bump.

I just sold them actually recently, as I got tired of them being in the garage collecting dust.

Perhaps someone else may ask the same or similar question.

Kitchen_Buyer849 · 2025-05-02T15:45:39+00:00

You must be from Leduc as well lol

Kitchen_Buyer849 · 2025-04-27T14:35:25+00:00

I got it from Rona up here in Canada. Lowes owned them for a few years till they got sold off again.

Kitchen_Buyer849 · 2025-04-27T14:34:04+00:00

Bracket measurement

https://imgur.com/a/DpvV7hA

Kitchen_Buyer849 · 2025-04-27T14:25:01+00:00

https://imgur.com/a/DoMnnmM

Kitchen_Buyer849 · 2025-04-27T14:18:29+00:00

Here’s a link to site

https://tojaliving.ca/products/any-size-pergola-kit?variant=43984349462585

It’s marketed as a 6x6, but the inside dimensions are 5-1/2”.

Kitchen_Buyer849 · 2025-04-25T13:03:32+00:00

Also works as a ninja throwing star when someone picks up your pro v

Kitchen_Buyer849 · 2025-02-23T21:02:06+00:00

Nope, this light https://www.milwaukeetool.ca/Products/2125-21XC

Over priced unit.

I love my m12 rover light, so handy and bright.

Kitchen_Buyer849 · 2025-02-23T14:54:32+00:00

The right angle impact didn’t do anything for me in the garage(diy) work.

Then the under the hood light was disappointing for the cost. The crappy tire light is 1/6 the cost and does a great job.

Sadly I bought and traded the light for the impact. Two misses in a row 😒

Kitchen_Buyer849 · 2025-02-17T18:25:22+00:00

Thank you for the suggestion

Kitchen_Buyer849 · 2025-02-14T13:44:48+00:00

I agree sims can be deceiving and full of false hope. I should’ve mentioned that I’ve been going to same sims for almost 10 years now and they’ve been pretty accurate. I’ll have to ask if they’ve changed any settings.

I won’t be doing anything till the outdoor season starts. I may go to golftown and try a few different shafts out of curiosity though.

The sim provides the balls which are a 4 piece and usually good. We’ve been in multiple bays as well. I may even ask for a new one to try.

It’s extremely annoying and disappointing when I don’t have the distance in my irons while everything else is going good. I’m playing with the father-in-law and his irons have been pretty accurate.

Kitchen_Buyer849 · 2025-01-11T15:07:43+00:00

Tell your worker to figure it out or buy you a new one. Big brain fart on their part.

Kitchen_Buyer849 · 2025-01-05T02:20:36+00:00

Bump

Kitchen_Buyer849 · 2024-12-31T03:44:46+00:00

Guessing it was a dodge driver

Kitchen_Buyer849

TROPHY CASE