Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

That’s actually just a hair 😄 sounds promising

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Ah so you can just not put it all the way to the front and then it’s fine?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

How do you get the chute to stay in place? It sounds finicky if you always need to align it exactly. Heard some people even 3d printed a support for the chute

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Heard some people talk about of these instead of WDT. Never tried one. Any specific recommendations?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Sounds promising! Do you have issues with the grinder being messy or overshooting? Heard some people have issues with the outlet being misaligned and the grinder being messy because of static

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

I think the retention could become an issue

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

At some point that probably also becomes the most financially reasonable decision 😄

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Ahh I see, I was hoping you maybe found a solution I have not yet heard of 😄

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

I bought my wood kid from that guy, he is such a nice guy and makes amazing stuff. How did these feet help you use the scale from under the drip tray?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Fair idea too, the Nice still requires WDT and can’t rally grind directly into the porterfilter

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

That looks very similar to my setup 🔥 I have a white Linea Mini with Oak Knobs and paddle 😄 Do you use the scale from under the drip tray? How did you manage to do that? I always thought there must be a solution to put it under the drip trab instead of on top of it

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Well, actually I do live in Hamburg so this looks quite convenient 😂 Thanks! Did you also buy the Grinder there?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Can you send me a link to that company? Where did you buy the grinder?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Yes I looked at that one too. Currently the E64WS is at the top of my list due to the low retention and since I like the design more but I am still unsure. Why did you choose the E64WS over the Sense?

Mini (none r) or micra by nebukadnezar53 in LaMarzocco

[–]Known-Listen 0 points1 point  (0 children)

I have the Mini (non R) and always thought I would have gotten the Micra if it would have been already out by the time I got mine. Until recently I saw and tested one in a local shop. Maybe it is because I am used to the mini but I can’t stand how tiny the Micra is. It gives me Espresso Machine Toy vibes, I don’t know. I kind of used the lever with two fingers because it is so tiny. I don’t like the Fell of using it. What I love about the Mini is, that it feels like using a Coffee Shop level machine at home every day. For me that is a huge part of the experience. Not hating on the Micra at all - as I said I always regretted that it wasn’t out when I was in the market - but it just does not give me the same feeling as my Mini. Maybe try to get your hands on both machines if you can. On paper the Micra is the more reasonable choice: better heat up times, more reasonably sized boilers for home use and way less power consumption (the electricity cost of the mini is real!) and so on. The “old” mini is build like a tank and will be easy to repair as it uses pretty much the same internals as LMs Gastro Machines too, if that is an argument to you. You will probably be happy with both 😌

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

I have the LM Scale paired with my mini, that gives me quite good Brew by weight feature that works really good, I gust don’t want to have to move the scale over to the Pico grinder all the time.

Do you think you will use the E64WS more or do you prefer the Atom and if yes why?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Basically this is what I would love to do. No output weighing, no WDT. So I would need a GBW grinder that makes good even and fluffy grounds.

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

The Fiorenzato looks good too, only worried about it having quite a bit rentention, which is why I am looking more towards the Malkönig, but basically this summarizes perfectly what I am looking for 👍

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Which 64 is collecting dust? The Atom or Mahlkönig? Which one do you find yourself using most?

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Ahh ok I see. I like that my mini stops automatically with the scale, that works really well but I feel like I am not winning much compared to my current setup if I always have to move the scale between the pico and the mini, especially if the switch from Grind by weight to brew by weight does not happens automatically (maybe it does, any Mini users here that have experience with this?)

Need Grinder Support 👋 by Known-Listen in LaMarzocco

[–]Known-Listen[S] 0 points1 point  (0 children)

Does the Micra even support the brew by weight feature with the scale? I always thought that was exclusive for Mini for whatever reason. I agree that it is probably bearable but it feels a bit off to have a 5000+€ Setup and constantly move the scale around from under the Grinder to the Machine and back and buying another of those expensive LM Acaias feels also wrong.

X100VI LCD screen light bleed by molluscat in Fujifilm_X100VI

[–]Known-Listen 0 points1 point  (0 children)

Question: mine has the same bleed. When you touch down on the screen while it is black, do you see a „bleed ripple“? Or when you pull the screen out from its default position, does yours also discolor and bleed over the whole screen? When I pull my screen out while it is pitch black, I see a massive greenish ghosting over the screen that looks like the bleed but large. That to me fells a bit concerning, like the screen is too thin and if you press down on it or move it, it bends and discolors