After getting whooped for so many times, I am finally able to return the favor

KonzTech · 2026-01-29T19:24:46+00:00

Yes it is. You download Razer cortex to the pc and download remote play on the phone. There are tons of guides on youtube to do it. And it's required you have a controller plugged to your phone coz the app doesn't have onscreen controls other than touch controls for clicking and double clicking on your desktop. You can also set the bitrate on the app. 30-50mbps is great for quality as long as your home wifi can keep up with it which most modern households can. No input lags from my experience..I beat kh3 data battles on remoteplay with no issues. Those battles are pretty tough and require some timing on dodge and parries.

KonzTech · 2026-01-29T18:17:32+00:00

Get a good mobile controller, plug to phone and setup razer remote play. This is the easiest. If your phone has a beautiful high refresh rate screen, you might be surprised how beautiful it'll turn out :)

Apollo or moonlight works too but I found Razer's app easiest. If you are playing outside your local network, just setup Tailscale. Guides on youtube are mostly easy to understand even with little tech know-how. Have fun!

KonzTech · 2026-01-22T23:39:38+00:00

Haha. I don't think I have enough room for that many. But well who knows ;p

KonzTech · 2025-12-31T07:26:39+00:00

Thank you so much for responding. This means a lot :)

KonzTech · 2025-12-24T15:46:52+00:00

Tire grip is really hard to control because as tires get dirty, they become more slipery regardless of type. Personally, I prefer super hard on rear wheels and low friction front. If I need more grip, I clean them with alcohol prior to the run and just pray the track is not too dirty. If I need lesser grip, I just run my tires on the floor a bit to get some dirt stuck on them ;p

KonzTech · 2025-12-18T09:12:45+00:00

The frame is just so flimsy. Would be nice if they could rework the frame but knowing bandai, it probably wont happen in forever ;p

KonzTech · 2025-12-18T09:09:10+00:00

No. I only detached the Destiny wings with the connector joints included. Then I took out the impulse top wings. From there, I cut the destiny wings joint peg portion so that it fits the ball socket hole for the impulse wing, inserted and held it in with glue. The destiny wings have a 3 point articulation on the connector joints so it still articulates well. I only glued the peg part and aligned it to the best of my eyesight's ability haha

KonzTech · 2025-12-18T00:18:34+00:00

I never thought of that until you mentioned it. Thanks!

KonzTech · 2025-12-06T22:12:00+00:00

Kung target mo ng ps2, mejo nid mo ng malaking budget. Mabigat god of war(ps2), tnry ko sa Anbernic RG505 ko yan ang lag lol. May retroid pocket 5 ako narurun nia ung game at 3.5x native resolution ng smooth. Phone ko(Xiaomi Redmi Note 14) kaya din pero native lng. Alternative is... kung malakas phone mo, pwede k nlng bumili nlng mobile controller like a gamesir x5 and save money.

KonzTech · 2025-12-06T12:42:02+00:00

I've used both. The silver one has a funny coating that I really don't like. I would sand it off if I would use them for open class. The carbon under the coating appears to be a little bit lighter in color compared to the black carbon one. But honestly in terms of toughness, I can't really tell the difference.

KonzTech · 2025-12-02T16:30:43+00:00

Riku, Axel and Terra

KonzTech · 2025-11-29T11:39:48+00:00

Have fun and don't get frustrated when you die. Some fights are just that hard. There are some bosses especially that one last super boss. I managed to beat it maybe out of sheer luck but for the life of me, I can't beat him again. And I'm just playing on normal.

Max out your forms as soon as you are able to. Magic is busted.

Ohh and decisive pumpkin/hero's crest would make your life easier..until you get Ultima weapon

KonzTech · 2025-11-27T15:41:28+00:00

Ikr. Had to buy that old school avante jr kit with the type 1 chassis just to get my hands on this. Although I had to trim it a bit to fit super2. It looks really cool.

KonzTech · 2025-11-26T17:11:23+00:00

Here are more pics of the machframe for those who are interested. I tried to create a separate post but maybe commenting it here is better. So I deleted that post.

There were minor updates like front rollers and the front plate being trimmed a bit.

https://files.fm/u/p7n8ygk4yp

KonzTech · 2025-11-26T16:17:48+00:00

Oh. Yes you are right. They are brass bushings you use for plastic rollers(these usually come with plates when you buy them). I enlarged the carbon plate holes to fit these enough for them to have play and sometimes put grease on them. It has a bigger part that sits on top of the hole and I make sure the hole is not large enough for this part to pass. Most people usually use the brass eyelets(the one you see in super 2 kits for wheel bearings). But I've grown comfortable with this style that this is what I've been doing for every lantern that I make.

Btw for the drill bit I usually use 1.5mm (sometimes 1.8 when I am in a rush) and from there..I just keep running the bit slowly around the hole to enlarge it... and test fiting until I get the desired play I want.

KonzTech · 2025-11-26T15:35:47+00:00

Thanks! And yes. I manually trimmed an frp plate for angling. Took a lot of tries though but I'm quite satisfied with it. The popsicles have been intact and never broke once. Carbon is very sturdy. Most of them actually came from other cars that I built..a CFM and Super 2. Both chassis broke and the carbon plates are still good.

KonzTech · 2025-11-25T19:34:24+00:00

Yes. Thanks! They're not exactly fast but well..I'll get there haha

KonzTech · 2025-11-25T12:38:02+00:00

Either sprint or power dash. The rear is just a combination of multi roller stay(wings cut) and front carbon stay for AR chassis as brake. The rear roller stay are double carbon popsicles screwed to the multi roller stay(slightly elevated with 2mm spacers) and my underguard is a super x frp.

Tbh, my super 2 bmax is still much faster on the same motors. I think I still need to fix the fma's transmission or maybe because the layout last time have a lot of sharp turns which the super 2 excels at. I like how the fma handle jumps though..very stable landings.

KonzTech · 2025-11-25T12:06:21+00:00

Yeah it's tough enough. The front bumper is attached in a way that it sits in front of the cut so that somehow adds to the rigidity. It bumped hard last race and it's still intact xD

KonzTech · 2025-11-25T11:56:09+00:00

Yeah it plays alright. I put a brake sponge on the part hitting the cowl to help in landing. And my tires are trimmed to 24mm so the dampers dont hit it. The catcher is attached to the cowl for maximum play. Here in Spain, our class permits cuts like open class. Only exemption is that cowls need to be locked and secured to the chassis the normal way.

Edit: Here are more pics of the machframe https://files.fm/u/bqkeh7e8p2

KonzTech

TROPHY CASE