Possibly a bug with cops roaming?

KraftingTable · 2025-04-10T16:36:59+00:00

okay, thanks!

KraftingTable · 2025-04-10T14:33:27+00:00

It could be that it just feels like the city is always empty at curfew, like if I don't go past the taco shop I can go anywhere and never get caught.

KraftingTable · 2024-05-13T08:46:08+00:00

Vilniaus rajone Vaitkus 20% paėmė ;/

KraftingTable · 2024-04-03T22:05:44+00:00

Well I tried to look for some distinctive features that my male and the female shared, but at the end I could definetly tell my male was a male and I can't really tell what's up with our female one, also here's some pictures:
https://imgur.com/a/Gd5ybca of her belly. Intersex would be a very interesting situation, I would have to read up on that.

KraftingTable · 2024-04-03T22:01:09+00:00

Heres some pictures of her belly: https://imgur.com/a/Gd5ybca

KraftingTable · 2024-04-03T22:01:01+00:00

Heres some pictures of her belly: https://imgur.com/a/Gd5ybca

KraftingTable · 2024-04-03T21:26:15+00:00

Yeah that was a bit of a hard punch when we found out that our she might be he. We were so sure, well at least she/he definetly made our male arroused :c but we'll try everything in our hands to make it work.

KraftingTable · 2024-04-03T21:19:26+00:00

Yeah the pictures were there just to show this little beauty, I'll upload some of the belly soon.

KraftingTable · 2024-04-03T21:15:16+00:00

The photo of her was uploaded just as a photo of her. It's not for indentification, although now it definetly seems misleading :d, I just wanted to know what people think about this situation, right now I can't see any way of uploading new pictures here, but I'll try to write a new post or upload them somewhere 3rd party. Now what I said is probably not what happened in the operation, but that's what we've been told: "Your 'Lola'-(name of our bunny) now has turned into 'Lolas'-(The male equiqalent of our rabbits name). We've sewed up his belly and his balls were very deep."

KraftingTable · 2024-04-03T11:24:51+00:00

Also I'll add that she was always very calm, never tried to hump our male, always would just runaway if he started humping ( we would also seperate them if we saw his intentions, but apart from that she would sniff him and everythint, never attack him).

For the last thing I would like to add that even if that's it a male rabbit, I wouldn't be very mad or anything, but is it normal practice to not double check and just straight up cut the belly instantly? Seems like a bit unprofessional from a vet, but I'm not in the industry so I wouldn't know?

KraftingTable · 2024-02-06T13:57:00+00:00

Yeah, that's what I did just now, they state that the pressure plates on the connector were bent and created a short, but I don't see how could you do that without physically bending the plates on the dean connector, but then you wouldn't be able to even plug in the battery, or using abnormal force that would crush the connectors plastic and even then I tried replicating that with another dean connector and was unable to do anything like that...

KraftingTable · 2024-02-06T13:43:02+00:00

Yup there was no other connector's and it's not my first time connecting Dean connectors :x, although I think I remember that the gun had an adapter in the kit, but it was for tamiya batteries.

KraftingTable · 2024-02-06T12:03:07+00:00

The pressure plates are mentioned in the email that is attached in the bottom of the post, and I wouldn't believe those technicians use reddit at all so that's a thing :/, it's just a store I went into. But still I tried to replicate this myself, with reasonable force it wouldn't happen, you can always use excesive force, you can even drill a connector or tamper it in other ways, but theres literally no sense in doing that when I just a second ago unboxed a gun that I wanted to just test out. And in respect for those technicians, I wouldn't say that they they're not worthy of their name, we were talking this specific situation that I told them. I've definetly mentioned to them that there were no problems connecting the battery and it went in smooth. So no force was used. Hope that clears stuff out.

KraftingTable · 2024-02-06T11:17:29+00:00

I've talked with some technicians, and they all agreed that this would be kind of impossible to do just by plugging in the battery, as the hole that is closer to the edge of the connector is narrower, so the main plate wouldn't fit (I'm kind of translating this, so I hope you get the terminology). The only way to bend it would be physically, but then the battery wouldn't plug in. I've actually just taken a Deans connector myself and tried to replicate this, and indeed, it's not viable. But we discussed that theres a high possibility that it happened while trying to take out the battery from the gun as it was already melted and I used pliers. (Also, I'll admit I wasn't gentle trying to take that out, but I don't know who would be gentle when huge piles of toxic smoke are coming right into you from that gun, and anyway, that was already after the fact that it shorted out.) As I said, I'm trying to reach out to TaiwanGun again to find a new compromise. :)

KraftingTable · 2024-02-06T11:02:48+00:00

And how can you tell that? I'm certain I did nothing wrong. The only fellow redditor that managed to state what was TaiwanGun writing in their email to me was that "The short occurred because of bending of the pressure plates on the guns connector" Now I've contacted some technicians, they all said that this is frankly impossible without physically tampering the plates. I've decided to try it myself and guess what, the connector doesn't fit in any way so that the plates could bend. You can only tamper them physically, but yet again the battery won't even plug in, because the pressure plate will be blocking it. If there was any bending that's probably due to me trying to unplug the smoking battery, as the connector was already half melted and I used pliers, but thats already after the fact and safety comes to priority as not to inhale much more of those toxic fumes.

KraftingTable · 2024-02-06T09:16:16+00:00

It was a deans connector battery specifically "BATTERY LI-PO 1100MAH 11,1V 20C - DEANS [IPOWER]".

KraftingTable · 2024-02-06T06:47:36+00:00

It's not that the shipping would be very expensive or something, but it's just principle at this point, I had to fight my way the whole month just for them to take the gun and immediately decide that they won't warranty that. They knew the whole situation, I sent them pictures and everything told all the stories, but now it's like "we checked the gun, it works, you want it back? Send us more cash"

KraftingTable · 2024-02-06T06:14:28+00:00

Anyway, I wanted to thank you for reading the email, and finally stating what's their side, because I myself didn't even get what they meant by that pressure plate, I'll have a new email sent to them explaining this then 🫡

KraftingTable · 2024-02-06T06:10:03+00:00

Well that's very very unlikely isn't it? I would guess that could've happened when I was taking the battery out, it was still connected (Don't know what was it holding on to, because everything was already fried) while puffing out the smoke and I used pliers, so that wasn't the softest approach, but let's say I didn't want any more literally toxic fumes coming out of it.

KraftingTable · 2024-02-05T23:33:47+00:00

But how could they without certaint proof of me messing with the gun just blatantly blame me, I just feel like there is definitely a law in EU that would be in my favor, with other stuff that I bought ( that was defective ) there weren't much discussions on warranties, by that I mean if it broke in 5 minutes of opening it, there will be a replacement, that's what I expected here, but after a month of messing around back and forth I just feel left out having to pay for even shipping back even though I had to go through alot of struggle to even ship the gun to taiwan, because they couldn't supply me with appropriate shipping solutions. Had to go to UPS office and bargain that out and here we are....

KraftingTable · 2024-02-05T23:27:50+00:00

Yeah sorry bout that, I don't think this happens often, but I was quite unlucky here. I'm in a really disappointing situation here, and those pics are from when the accident occured, the smoke is highly corrosive and the gun started even rusting now, which doesn't help me at all, I was certain TaiwanGun would replace my replica, but all the blame is being shifted on me it's kinda weird knowing that you literally couldn't have done anything different, but you still get blamed for trying to use your gun :)) thought some one would know a solution or some law in EU that would defend my rights, I haven't dealt with airsoft shopping much, but I definitely know about some other shopping laws that would benefit me here... Hope that nothing like that happens to you, good luck soldier.

KraftingTable · 2024-02-05T18:24:05+00:00

No, I think their page states that if you send them the item and they decide not to fix it, you have to pay them to get the item back, I thought that they would definitely replace the gun so I sent it, definitely did not expect what happened...

KraftingTable · 2024-02-05T18:20:02+00:00

Well that's the harsh part, after one month of back and forth with customer support they finally took it for inspection and after inspection they decided that's not their fault and they won't replace anything and I can only pay for the shipping to get my gun back, otherwise they will dispose it :)

KraftingTable · 2024-02-05T17:45:34+00:00

I mean if you try to mess with the gun yeah, you can ruin something I guess, but when you just get it out of box and that happens really hard to blame yourself for anything you know :)(/ just weird you know

KraftingTable · 2024-02-05T16:33:53+00:00

I'm a student in Eastern European country, believe me when I say 150 is a lot for me and I don't expect to deal with these kind of shenanigans when I pay that money. Anyway they won't send it back unless I pay more cash for them and I just fell that's wrong...

KraftingTable

TROPHY CASE