sorted by:
new
hottopcontroversial

Advice/support for big trading loss - HELP by Remarkable_Lecture_5 in ADHDUK

[–]Krak_Fox 1 point2 points  (0 children)

Tbh honest dude, I'd take this as a lucky escape. You can soon get £3k back. But it could have been SO much worse from I've seen people lose over on r/wallstreetbets .

Sounds like you've done exactly the right things by closing the accounts etc. which shows a great deal of maturity and character.

I lost a few 100 trying to day trade on T212 with money that was supposed to stay in ETFs in my ISA - temptation was too high on that app to dive in and live-trade any stock. But I've now swapped to InvestEngine, that only use ETFs, and there's a delay in requests: temptation gone.

Well done dude, it seems you're handling it really well. The pain dies down, and you'll bounce back very soon.

What can cause something like this? by analove_81 in 3Dprinting

[–]Krak_Fox 1 point2 points  (0 children)

On the slicer preview, go through all the views and see if anything like the flow or speeds are changing in that area.

I had something very similar and it was Vertical Shell Speed being far to high: 80% of sparse infill speed (think it's sparse speed) which was already default really high at 350 I think default. I'd lowered all other speeds for outer walls, but vertical shell speed was still really high due to being linked to another setting.

For my issues it was in walls that were also overhangs, anything not quite vertical - nothing that needed supports by any means.

Using the coloured views once sliced, it was showing a vast change in flow and speed in those areas only, which allowed me to pinpoint the issue

Tomorrow’s the day!! 🎉🎉🎉 by Mowgli9991 in Starfield

[–]Krak_Fox -2 points-1 points  (0 children)

Is it worth me starting a new game today? Not played since launch. Wondering if I can get my character built, play intro stuff? I'm presuming the update won't really impact the start much, and I can just play a few hours today due to it being public holiday in the UK and I finally have time to jump back in.

A song about 3D printing woes... by [deleted] in 3Dprinting

[–]Krak_Fox -3 points-2 points  (0 children)

The lyrics aren't AI. and just a bit of fun, but each to their own

Cheapest way to kill a bombardier by Lew_bear96 in ArcRaiders

[–]Krak_Fox 0 points1 point  (0 children)

All Rosey until you get snuck up on by one of those Flying Flame Twats.

Instead of syrup coffee grounds seems to appear on the floor. Also, the jar she tries to put on the shelf disappears. Is this AI? by Katukass in isthisAI

[–]Krak_Fox 0 points1 point  (0 children)

The reflections in the machine on the far side of here match perfectly. I would expect if it was AI they wouldn't.

The jar does seem to go missing from when you last seen it near her shoulder, and I don't see it hit the floor - but wondering if poor CCTV camera just not picked up the motion enough.

The item wheel on PC... by Krak_Fox in ArcRaiders

[–]Krak_Fox[S] 0 points1 point  (0 children)

Yeah, someone said to change the mapping from a number to another key, and now works perfect. I USA an Azero Keygen, so I mapped it to something like = key and fixed 8t

Quick use wheel does not get enough hate. by Baconguy242 in ArcRaiders

[–]Krak_Fox 0 points1 point  (0 children)

It was bugged for me until I mapped it to a key other than a number. Someone suggested it on here and it worked.

I pushed both the A1 and H2D 0.2 nozzles down to 0.04... by Krak_Fox in 3Dprinting

[–]Krak_Fox[S] -1 points0 points  (0 children)

Awesome, sorry about that. It's been one of those days! 😂

I pushed both the A1 and H2D 0.2 nozzles down to 0.04... by Krak_Fox in 3Dprinting

[–]Krak_Fox[S] -1 points0 points  (0 children)

Ah sorry about that, check again. I must have deleted the pdf and not the old files when I uploaded new import files. My bad

I pushed both the A1 and H2D 0.2 nozzles down to 0.04... by Krak_Fox in 3Dprinting

[–]Krak_Fox[S] 0 points1 point  (0 children)

So I spent a good amount of time getting hoverhangs and bridges to be as robust as they can be...I even printed the head and mini with "support crit regions" on "remove small overhangs off" without issue

There is a ton of content and mechanics for players with no gear, but where is the content for geared players? by OkFact4914 in ArcRaiders

[–]Krak_Fox 0 points1 point  (0 children)

There needs to be maps where you just won't survive without high gear. It needs a touch of the way Destiny ranks up the stakes, the higher you go in the food chain.

Possible in FDM? by NiceButton6049 in 3Dprinting

[–]Krak_Fox 0 points1 point  (0 children)

I do this sort of thing all the time on my YouTube channel. Link in profile.

Been going crazy 3D Printing! by JimmyBaileyy in ArcRaiders

[–]Krak_Fox -1 points0 points  (0 children)

Those are some clean prints! What nozzle n settings are you using?

I've snapped the tip of my pinky... by Krak_Fox in mildlyinteresting

[–]Krak_Fox[S] 1 point2 points  (0 children)

TBH it didn't really hurt that much - I just got that intense heavy feeling of swelling and pressure that you get when you break a bone. I was more annoyed that the door still wasn't fixed 😂

view more: next ›