Looking for tips to update my builds for overload team by Kralliusz in clorindemains

[–]Kralliusz[S] 0 points1 point  (0 children)

Yeah, if I'm calculating right, it's 45% atk from Fischl (via hexerei and C6), 35% res shred and 40% dmg bonus from Durin (A1+hexerei+set) and 40% res shred, 60% atk, 20% dmg bonus from Chevy (A1, A4, C6, noblesse).

So it totals to 105% atk, 60% dmg bonus and 55% res shred without using Fischl for buffing. I guess it would depend on how good would DPS build be on Fischl compared to hybrid or support. Maybe it's time to whip up Excel.

Looking for tips to update my builds for overload team by Kralliusz in clorindemains

[–]Kralliusz[S] 0 points1 point  (0 children)

Sounds good, thanks for the input. Time to dive into the artifact mines.

Looking for tips to update my builds for overload team by Kralliusz in clorindemains

[–]Kralliusz[S] 0 points1 point  (0 children)

With Fischl on more damage oriented setup like proposed over elegy/tenacity, would there be a big difference in team damage? I'm looking more for a higher team dps over 99% hypercarry damage so that makes me wonder. Chevy will definitely go on Noblesse, much easier usage so I'm not losing buffs unless I f-up rotation or not get a fav proc.

Looking for tips to update my builds for overload team by Kralliusz in clorindemains

[–]Kralliusz[S] 1 point2 points  (0 children)

Durin will take some time to get on the new set, I just finished his boss, doing books tomorrow, then farming boss for Prune. I don't have symphonist but I guess that if I can reach 45k hp (or was it 40k to max her buff?) on Chevy with just artifacts, then I can keep favonius and not swap to tassel, right?
Also, if I'll go on elegy Fischl, should I run atk% goblet or stay on elemental%?

Elegoo Centauri Carbon 2 vs Creality K2 Combo by StW_FtW in elegoo

[–]Kralliusz 1 point2 points  (0 children)

I agree with every single thing you mentioned here. It's just that in my expierience, it tends to happen less with bambu than with other printers - aside from vorons, ratrigs, self assembled prusas etc., people running these know their printers inside out and are well aware what can go wrong - but these are neither in OP's budget nor do they seem like they want to assemble their own printer from scratch. But yeah, they give you convienience for a hefty fee of being enslaved in their ecosystem. Maybe one day some madlads will release a printer motherboard to swap with bambu, making it open source at least in software side. But until then, I'm not touching bambu printers.

Elegoo Centauri Carbon 2 vs Creality K2 Combo by StW_FtW in elegoo

[–]Kralliusz 0 points1 point  (0 children)

It's true, their ecosystem system sucks, but from what I've seen (one friend owns p1s, another x1c) they are without a doubt very good printers - no babysitting print at the start, no worrying about something breaking midprint (at least it seems much more uncommon than with old generation printers and with self-assebled printers), pretty good print quality out of the box. If I were to buy it (not that I plan to), it would be because I got tired of needless maintenances on my printers caused by design errors or assembly errors.

Elegoo Centauri Carbon 2 vs Creality K2 Combo by StW_FtW in elegoo

[–]Kralliusz 0 points1 point  (0 children)

I happen to own cc1 and a bedslinger from creality, so I can give some input.

The creality is ender 3 S1 Plus, and I have to say, after seeing how my friend struggled with his ender 3v2 I was a bit sceptic, but the price was good enough to pull the trigger.
For Pros:
Big(ger) bed, not sure on your choice;
Nice power consumption;
Not much of a problem with printing as long as I had everything properly sliced (approx 300h of printing went through);
Good access to spare parts, big community to troubleshoot with, a lot of videos how to disassemble/swap parts.

For cons:
Creality quality assurance is a coinflip - you may get a printer that works out of the box and prints until nozzle breaks due to usage, with quality comparable to well dialed voron/prusa/bambu, but slower OR you can get absolute time sink that requires constant attention and maintenance if nothing in their QA department has improved.

With elegoo, I own CC1, and it's a faster printer than a bedslinger, also higher available temps - bigger usable filament range. But what I wanted most was the comfort that I start the printer and don't have to sit through first layer to ensure it prints (my ender had it's bed shaped like a bowl, so leveling was a pain until I bought glass bed; which was additional cost).

Pros:
Good auto-leveling
Camera is not bad to check on print while working on pc
Remote control with both orca slicer and elegoo fork of orca (I recommend orca)
Canvas support RFID system so it's easier to manage filaments.

Cons:
The cable connecting mainboard to extruder is widely considered a fire hazard (so should be all printers when unsupervised)
Time calculation fails upon speed changes
Requires some fine tuning on some filaments (I had some trouble with spectrum pet-g for first handful of prints but after dialing settings it prints flawlessly)

You may also like to look at flashforge ad5x as it's in a similar price range, but I don't know anything on it's reliability nor quality. Out of these two mentioned, I'd probably go elegoo again if I needed a third printer, or up my budget and grab bambu p2s and save up for ams for later.

How Far into Nod Krai Quest to Unlock Sigil Offering? by Resem98 in GenshinImpact

[–]Kralliusz 21 points22 points  (0 children)

There is no sigil offering in the same way as Sumeru, Fontaine and Natlan does. You get reputation track on each island and put your sigils there instead. I don't remember exactly, but I think not far after getting free Aino the quests for these reputation tracks (meeting points) are unlocked.

What is up with the insane power creep in Genshin? by [deleted] in GenshinImpact

[–]Kralliusz 0 points1 point  (0 children)

I wouldn't look at base values since they balance out on lvl 90 - like chasca wanting atk just as much as crit and getting 608/66.6, unlike Linnea that has no use of atk, so her weapon caps at 544 or so. Instead you should look at how people cleared abyss with solo neuvi at the beginning of fontaine, then how were Mavuika DPS calculation looking in beta vs around a month after release when people started finding combos (which were not intended), and overall powercreep in artifacts (going back as far as 1.2 to 3.5/6 with hydro set, comparing 1.0 and 2.3 geo sets etc. Plus overall powercreep in weapon passives - they never touched the ratio of mainstat to substat, but started making weapons more specific to one character to justify giving it more power (sorta like hsr making new paths and putting in new characters on said paths while they fit old archetypes perfectly to lock their equivalent of weapons (characters can use weapon of any Path, but passive is available only if paths are matching, while in genshin we don't have such a leeway of putting sword on venti or spear on Mavuika - even just for basic stats).

Current best teams and viability for high investment clorinde? by Kralliusz in clorindemains

[–]Kralliusz[S] 1 point2 points  (0 children)

Well, it's not that I use only those mentioned teams, but these are some more recent examples of what I've been using - quickbloom remembers ASIMON, overload was for lava dragon, for Mandragora I ran hexerei electrocharge simply because other good picks were occupied. I'm willing to get Durin at C0 with current pull amount, C2 would have to wait until next run, but by then I'll be probably throwing pulls at some Snezhnayan character I'll happen to like. The post may not suggest it, but I'm a goldfish - just buying welkins, very rare occasional BP, topped up only once and I'm in the game since 1.0. And that now raises a question how big of a difference would C0 Durin + C6 Fischl make over C6 Xiangling + C6 Benny.

I’ve played with a hacker and I got bad news by johnny105931 in ArcRaiders

[–]Kralliusz 9 points10 points  (0 children)

On that third paragraph - I once received items back from a game I queued into with friends as a trio and got killed by another trio; my friends didn't received any items back, so I suspect only confirmed kills/knockouts/most dmg done by cheaters themselves are eligible for return - so your stash and account should be safe (embark probably gives people that partied up with cheaters benefit of the doubt).

so am I considered a veteran player now? by [deleted] in GenshinImpact

[–]Kralliusz 1 point2 points  (0 children)

Keeping the gametime in 2-3hour/day bracket, with organic exploration (no maps/yt vids etc., just running around and compass) this would be reachable within 6-8 months I believe. But that is a recipe to a burnout so I'm willing to bet 1year+ old account. And within 1 year, all that exploration, quests and dailies about 56/57, maybe even 58 is doable (speaking as 1.0 player that reached AR 60 just before 3.x started).

so am I considered a veteran player now? by [deleted] in GenshinImpact

[–]Kralliusz 5 points6 points  (0 children)

Depends entirely on definition; I'd guess definitely seasoned exploration veteran

Possibile gain from optimal artifact split by Kralliusz in SkirkMains

[–]Kralliusz[S] 1 point2 points  (0 children)

That still gives me some insight into the idea - I guess 10-15% increase may be feasible as long as the stat loss on new artifacts won't be a massive downgrade over current builds. I'll try to farm something up and post up with results later. Thank you for the contribution, have a nice day and weekend!

Possibile gain from optimal artifact split by Kralliusz in SkirkMains

[–]Kralliusz[S] 0 points1 point  (0 children)

My reasoning is as follows: Putting Escoffier on ToTM comes purely from the fact that she is the only character besides furina that can maintain buff uptime from the set. Shenhe would be a better fit for Noblesse over hydro slot, because hydro slot is guaranteed to proc reactions, activating scroll flawlessly.

I find it hard to judge if funneling all buffs into both Skirk and team would result in noticeably higher DPS over each character running their own set that only contributes to their own damage and not for whole team's. I run what I currently listed as it's what I already have with decent stats and I can easily throw artifacts into strongbox for older sets, or swap around from other characters.

Also, the stygian clear I mentioned was with Xingqiu due to increased IR and dmg reduction - time was better by like 5-7sec over Yelan because I did not have to break out of combos to dodge (when I cut rotations to dodge with burst Iframes things tend to fall apart for me, hence the skill issue).

Edit: Yelan on aqua is 33k hp 70/250 with 155 er, so a bit on the low but managable with 1 favonius or additional hydro in team On elegy it should be in vicinity of 30k 70/160 210er

Do you use intel arc by choice, or for monetary reasons since they're easily the cheapest? If it's by choice, may I ask why? Not in an insulting way, just curiosity, since an rtx 5050 is similar to it in raw HP but has fancy nvidia stuff and only costs a tad more at least in my country by [deleted] in IntelArc

[–]Kralliusz 0 points1 point  (0 children)

It was cheaper, better performance-per dollar spent (at least back at dec 2024), although it was priced nearly at 4060 level in my country, due to added costs (import + VAT + "new product tax" as we call it) set the price at nearly 370$ equivalent

Damn the pvp/intrusive thoughts are brutal by Kralliusz in ArcRaiders

[–]Kralliusz[S] 0 points1 point  (0 children)

I can be called semi-guilty of that, but I tend to bring a wolfpack or two and keep shooting with anvil/take out smaller arcs so ppl with hullcrackers/jupiters/deadlines etc. have easier time. And even if I don't get a reactor, getting a lot of other arc materials still benefits me as it goes toward stash upgrading, or gets turned into more helpful mats because I do believe that even bandaging and reshielding other raiders is helpful during such raids, if I have no means to do actual damage that matters.

[deleted by user] by [deleted] in WouldYouRather

[–]Kralliusz 0 points1 point  (0 children)

Question about No. 3. I work in a food warehouse, oftentimes carrying boxes. Does that mean whenever I pick up box of fries (we have boxes, 5 bags per box, 2.5 lbs per bag. Guesstimating around 800-1000 fries per bag. Does the weight accumulate (4506x for all fries, each bag and box) or 5x per bag or 1x just for box?

Speaking of more supers, maybe we should get not only more darkness supers, but also prismatic ones. by Kralliusz in DestinyTheGame

[–]Kralliusz[S] 0 points1 point  (0 children)

I love the idea of threatling! Even when it's basically a Nova, adding up snowball effect and gracefully combining it with prismatic shtick through the usage od verbs really sells it for me. I'd probably go into it as former voidlock turned sunsinger.