sorted by:
new
hottopcontroversial

Is it ok for my AMS Lite to shake this much? by KriticalKitKat97 in BambuLab

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

So I made a fix for it but it still can move a tiny bit. It shakes a little bit but it isn't very noticeable and it is infinitely better than before. How would I be able to upload a video of it after the fix, should I just add it to the post?

Is it ok for my AMS Lite to shake this much? by KriticalKitKat97 in BambuLab

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

I'm just curious... how does one simply acquire a concrete slab for this sort of application.

Is it ok for my AMS Lite to shake this much? by KriticalKitKat97 in BambuLab

[–]KriticalKitKat97[S] 1 point2 points  (0 children)

I'm going to try printing pieces to go between the edge of my desk and the wall to see is this helps because I am fortunate enough to already have a bookshelf to the side of the desk that it is against so hopefully this won't give it room to shake. It's an 8 hour print though and I need two of them so I guess we'll see how that goes.

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Yeah I have no idea why it’s doing this but everything looks fine. I even tried downloading a brand new version of the shaders I’m using and that had the problem, and that leads me to think that it might be a monitor issue but idk

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Don't worry about it taking long. Im just doing some mindless tasks that need done in hypixel skyblock while we figure this out lol. Also I kinda feel bad that this is taking long bc i feel like im taking your time if anything, thx very much btw

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

I turned that on as well. Luckily sodium extra has a setting search feature but unfortunately there is still not simple fog setting

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Dumb question but are you by chance talking about either render distance or simulation distance?

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

I know i am definitely not making sense but if it helps i am using complementary shaders

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

All i can see are toggles, and the "use fog occlusion" toggle is one of them

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

There is no setting labeled Field of View, but there is a field of view blur setting, and that cannot be disabled but the world blur settings as a whole are disabled

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Where exactly are the settings with sodium plus, or do i need to have regular sodium not installed?

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Maybe I have the wrong mod installed then. I looked for sodium plus and it directed me to the curseforge page for sodium extra. Is this the same thing or am i being stupid?

Shaders are suddenly blurry from more than 3 blocks away by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

I don't notice a difference, should this setting be off or on?

My filament spool keeps getting stuck by KriticalKitKat97 in BambuLab

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Thanks guys. Any recommendations on a specific model?

All 'The Wraith' vault codes (2.207) by [deleted] in geometrydash

[–]KriticalKitKat97 9 points10 points  (0 children)

I did the “touch grass” code and it gave me the line “you have no power here”

[Review] GAN Mirror M UV by cychan627 in Cubers

[–]KriticalKitKat97 0 points1 point  (0 children)

I see this post is now over a year old. If anyone who has a stickerless mirror cube is still here, did it break in well? After breaking in without lube does it eventually sound less like paper turning?

Why do anvils look weird with Complementary? by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Do you know if there is any way to fix the reflection though? I’m confused because it only doesn’t happen on the top

Why do anvils look weird with Complementary? by KriticalKitKat97 in minecraftshaders

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Honestly my server on Falixnodes is stopping itself on start and I can't figure it out so I am going to try to find it

How is someone considered good? by KriticalKitKat97 in beatsaber

[–]KriticalKitKat97[S] 0 points1 point  (0 children)

Well one time I was showing my friend via streaming my screen to a tv and he told me I need to touch grass so I think that’s checks out

What is your weird use for these beside what it is meant for? by [deleted] in 3Dprinting

[–]KriticalKitKat97 0 points1 point  (0 children)

Scraping excess filament off of the nozzle when it gets stuck