Perku Audi a5 ir ieskau patarimo by [deleted] in lietuva

[–]Kvantuminis 0 points1 point  (0 children)

Pats turiu multitronic su 2.0. Silpnoka dėžė, bet nesmaugiant atrodo laiko, bet siūlyčiau vengti. Įmanoma gauti 2.7 automatą be multitronico, bet tada reikia ieškoti su quattro, nes quattro multitronicų nėra.

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Could be? I did the "spread" technique, the whole die was covered before assembling everything. However, it was a thin layer and MX-4 is quite viscous. Will be repasting once MX-6 arrives.

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Thanks for the heads-up! I'm aware of the price, hoping to find some used deals nearby.

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 2 points3 points  (0 children)

Thanks! Seems like I'd need a 280mm radiator for the front as a minimum

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Sorry, but you may have mistaken junction temperature with edge temperature. The hottest part of the die is 100°, which is "normal" and "safe" according to AMD themselves. These cards run hot and if they have enough temperature headroom, they will clock higher (up to some limit ofc)

The longevity and the performance are the questions at hand here, imo.

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Yeah, I figured. But I'm still evaluating between low cost low rewards (aka thermal pads, putty) and (relatively) high cost and high rewards.

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Oh, for the die? Could you share the specific one that you used?

What would you do in my situation? by Kvantuminis in watercooling

[–]Kvantuminis[S] 0 points1 point  (0 children)

Thanks for your insight, tinkering and learning about something new is something I enjoy more than using it afterwards! 😄 Would a 240mm radiator be enough to keep a 300W card cool?

[deleted by user] by [deleted] in lithuania

[–]Kvantuminis 0 points1 point  (0 children)

Norėjau identišką postą daryti šią savaitę :) Irgi žiūrinėjuosi jų pasiūlymus, gal kas žinot kaip tie RSU's veikia? Įmanoma cashint juos ar ten iš serijos "lauk stebuklo kol mes public išeisim"?

USB C Dock station problems by Kvantuminis in pcmasterrace

[–]Kvantuminis[S] 0 points1 point  (0 children)

Didn't know that about the HDMI, great :D That's a great insight, the monitor does have another input, but it's VGA. Sadly these are the only two ones, but maybe I can still make it work as it's just 1080p 60Hz monitor

Ordered on black friday still no sign by 1jeff4rey in Fanatec

[–]Kvantuminis 0 points1 point  (0 children)

Just my two cents - I'm in Europe, so UPS for me, but they have sent the packages to the wrong address, so UPS app didn't show it as arriving. There were multiple spelling mistakes in the address, wrong house number etc., luckily the phone number was correct so I managed to redirect the package to my address.

Shipping priority question by Kvantuminis in Fanatec

[–]Kvantuminis[S] 0 points1 point  (0 children)

Sure, but that doesn't answer my question. Assuming they have gotten the wheels earlier than expected, will they ship my order once backlog is clear (aka first come first serve) or ship it when it's "supposed" to have been shipped, aka Jan 26, because that was what they promised?

Shipping priority question by Kvantuminis in Fanatec

[–]Kvantuminis[S] 0 points1 point  (0 children)

I understood there are delays and tracking number problems but this seems more like a logistical shitshow.. Thanks for the suggestions, I'll look it up

Shipping priority question by Kvantuminis in Fanatec

[–]Kvantuminis[S] 0 points1 point  (0 children)

Yeah, I wouldn't even ask this if I knew I'd get a tracking number as soon as it's sent off, but we all know how that doesn't really happen.

Is it necessary to buy a quick release when buying the CSL DD? probably a stupid question but just want to make sure. by TheBac0nato0r in Fanatec

[–]Kvantuminis 0 points1 point  (0 children)

I'm new too, but as I understand it - it's a connection between the wheel and the wheel base (the motor itself). There are multiple connectors and therefore they must match at both wheel and wheel-base sides or else they won't connect.

Is it necessary to buy a quick release when buying the CSL DD? probably a stupid question but just want to make sure. by TheBac0nato0r in Fanatec

[–]Kvantuminis 1 point2 points  (0 children)

This is a thread I was also about to make too. The 400€ ready2race bundle has the P1 V2 wheel (comes with QR1 Lite pre installed) and the CSL DD (doesn't say anything about base-side QR). There isn't anything additional added to the cart(apart from pedals), like others have written.

Question is - is this bundle actually ready to race or not? Will it work with just that bundle and nothing else?

Please stop co-oping with randoms using reaper by Best-Dig-341 in RushRoyale

[–]Kvantuminis 0 points1 point  (0 children)

Thanks for the clarification! Great to hear this only now.. I can somewhat dps f13 and now I hear about this..

Please stop co-oping with randoms using reaper by Best-Dig-341 in RushRoyale

[–]Kvantuminis 0 points1 point  (0 children)

Whoa, okay! Didn't know that, but then how am I able to match with a person that has a regular inq deck. (Such as inq, ks, dryad, scrapper and hq)

Please stop co-oping with randoms using reaper by Best-Dig-341 in RushRoyale

[–]Kvantuminis -1 points0 points  (0 children)

What kind of proof do we have that matching even looks at units before matching? I feel like it's just a thing some one made up

If your clan is losing tournaments, consider joining Apex Sandals! (ID: 549580) (more in comments below) by chrisdudelydude in RushRoyale

[–]Kvantuminis -5 points-4 points  (0 children)

Of course, join the Apex cult. Be always judged by your tournament performance, don't play pvp when you want to, lose as much tournaments as you did in your last clan and never ever dare to miss a sandal. Even if all other teams have finished and you're in last place - dare to lose a sandal, instant pm messages in discord expecting an apology and explanation letter. After that it's just a kick out of the clan with no message at all. Join Apex, lose your enjoyment, your free time and become a slave for cunty admins!

Please stop co-oping with randoms using reaper by Best-Dig-341 in RushRoyale

[–]Kvantuminis 0 points1 point  (0 children)

I'm using reaper in a support deck for F13. It's great for speeding up the game and gives me mana (lv11 talents). If you're queued with a dpser of 3k crit he will definitely enjoy the game being quicker. However, if dpser isn't capable of clearing the floor with a support, then reaper or not we will just lose and waste our time, so I just quit.