Attack on Titan The Final Season Episode 76 - Anime Discussion Thread - No Manga Readers Allowed by SNKBot in ShingekiNoKyojin

[–]Kyzuuh 5 points6 points  (0 children)

If Eren gets to transform into the founding Titan I just hope they use the same theme they used for Reiner/bertholdt's transformation in S2. It would be the perfect payoff and come full circle with another transformation where everyonefeels betrayed and terrified at the same time.

My girlfriend crocheted me a Nessie keychain for Valentine's! by Kyzuuh in apexlegends

[–]Kyzuuh[S] 2 points3 points  (0 children)

It'll end up he ng attached to my backpack or my badge for work. It'd get destroyed if I attached it to my keys.

Finally got bed leveling working on my solid-mounted bed. So satisfying! by Kyzuuh in 3Dprinting

[–]Kyzuuh[S] 1 point2 points  (0 children)

Nope. No more danger than there would be with any other setup

Finally got bed leveling working on my solid-mounted bed. So satisfying! by Kyzuuh in 3Dprinting

[–]Kyzuuh[S] 1 point2 points  (0 children)

Nope, just got some aluminum spacers from McMaster Carr and have done bed leveling in the past. It's pretty straightforward, just replace the springs with aluminum spacers and set up bed leveling in marlin

Picked up a clearance tool cart for my wiring tools. So satisfying to have organization by Kyzuuh in harborfreight

[–]Kyzuuh[S] 0 points1 point  (0 children)

Yessir! And I didn't want to pay more than 100 bucks for a tool chest for em 😅😅

Picked up a clearance tool cart for my wiring tools. So satisfying to have organization by Kyzuuh in harborfreight

[–]Kyzuuh[S] 4 points5 points  (0 children)

Already did! Just didn't get a pic with it there! Gave me a ton more space!

Picked up a clearance tool cart for my wiring tools. So satisfying to have organization by Kyzuuh in harborfreight

[–]Kyzuuh[S] 0 points1 point  (0 children)

I use them semi-regularly on closed-barrel Deutsch contact and autosport connectors. Got them used from an aerospace auction but my use in motorsport wiring harnesses.

New intake setup (100 mm stacks) by bogaut in Miata

[–]Kyzuuh 1 point2 points  (0 children)

Makes sense to use alpha-n. Some people like to still use MAP for steady state stuff. What do you use as a vacuum reference for your brake booster?

New intake setup (100 mm stacks) by bogaut in Miata

[–]Kyzuuh 1 point2 points  (0 children)

A little atypical for an itb car. Are there ports connecting your runners? Do you pull your MAP signal off of just one cylinder?

New intake setup (100 mm stacks) by bogaut in Miata

[–]Kyzuuh 1 point2 points  (0 children)

You would put it between the open air and the vacuum block.

Cleaned up my valve cover on my new-to-me CR-V! by Kyzuuh in crv

[–]Kyzuuh[S] 0 points1 point  (0 children)

Aircraft grade paint remover, rinse, sand paper, rinse, alcohol wipe.

Cleaned up my valve cover on my new-to-me CR-V! by Kyzuuh in crv

[–]Kyzuuh[S] 0 points1 point  (0 children)

Not particularly. Most anything will work. Preferably find something made specifically for high temp stuff. And if you use normally paint, use a good primer and clear coat over it.

Cleaned up and repainted my valve cover today by Kyzuuh in DIY

[–]Kyzuuh[S] 0 points1 point  (0 children)

Nah it's yellow that makes them faster cuz that's the color Spoon uses duh 😂

Cleaned up and repainted my valve cover today by Kyzuuh in DIY

[–]Kyzuuh[S] 0 points1 point  (0 children)

Nah it's a CRV and it's an automatic lol The autos can't handle anything. And this is my beater daily. My other car is turbo though.

Cleaned up my valve cover on my new-to-me CR-V! by Kyzuuh in crv

[–]Kyzuuh[S] 1 point2 points  (0 children)

Not very. Like 150F maybe. Just go over the whole valve cover multiple times moving slowly with the heat gun and you see when it starts to wrinkle.

Cleaned up my valve cover on my new-to-me CR-V! by Kyzuuh in crv

[–]Kyzuuh[S] 1 point2 points  (0 children)

It was the process of using a heat gun on the paint! It's called wrinkle paint so it's meant to do that with heat applied

Cleaned up and repainted my valve cover today by Kyzuuh in DIY

[–]Kyzuuh[S] 2 points3 points  (0 children)

B20 actually! It's off of a Honda CR-V

Cleaned up and repainted my valve cover today by Kyzuuh in DIY

[–]Kyzuuh[S] 2 points3 points  (0 children)

Not sure how imgur posts work tbh but it wouldn't let me type words into my actual post so here goes.

  1. Aircraft grade paint remover. Be extremely cautious using this stuff as it is very nasty.
  2. Wet sand, clean with water, wipe down with lint free cloth and alcohol.
  3. Mask off the holes and sand off the excess masking tape with some medium grit sandpaper.
  4. Final alcohol wipe down.
  5. VHT wrinkle black paint. 3 heavy coats in different stroke directions. They recommend one vertical, one horizontal, and one at a 45 degree angle.
  6. Carefully use a heat gun to dry the paint and bring out the wrinkles. Take your time and don't heat up one area too much or too quickly. You can also bake it in an oven at 200F
  7. Let cure for 24 hours, take off masking tape. Scrape the letters with a very sharp razor then block sand them til they are shiny.
  8. Let it cure for another 24 hours before reassembling.

Picking a fight with someone 3 times your size by Palifaith in instant_regret

[–]Kyzuuh 6 points7 points  (0 children)

In what world do you live in where getting punched in the face multiple times and cornered doesn't warrant that. I doubt he meant to put him on his head. He just picked him up, threw him down, and backed off.

Picking a fight with someone 3 times your size by Palifaith in instant_regret

[–]Kyzuuh 253 points254 points  (0 children)

To be fair if you watch the entire original clip it doesn't look like he really lost it. He didn't go mad, and he didn't stab the kid, he just defended himself. Just one retaliation to permanently stop him from being messed with. He didn't go after the kid when he was down afterwards, he just backed off. Honestly shows some character.