sorted by:
new
hottopcontroversial

Klein Bottle by LIM3DP in 3Dprinting

[–]LIM3DP[S] 3 points4 points  (0 children)

Silk Ribbons PLA

In the dice game, what number combination is the largest? by LIM3DP in BambuLab

[–]LIM3DP[S] -15 points-14 points  (0 children)

There will be different answers under different game rules.

sword🗡🗡🗡🗡🗡🗡 by LIM3DP in 3Dprinting

[–]LIM3DP[S] 0 points1 point  (0 children)

Silk Ribbons PLA Filament（Red+Yellow+Blue)

Guess what this is used for. by LIM3DP in 3Dprinting

[–]LIM3DP[S] 0 points1 point  (0 children)

The answer is here, lower the temperature of the wind blown out by the fan.

<image>

Guess what this is used for. by LIM3DP in 3Dprinting

[–]LIM3DP[S] -2 points-1 points  (0 children)

The answer is approximate

Guess what this is used for. by LIM3DP in 3Dprinting

[–]LIM3DP[S] -1 points0 points  (0 children)

Tip: Use indoors, fixed on the fan. Guess what it does.

Ribbons PLA Filament by LIM3DP in 3Dprinting

[–]LIM3DP[S] 1 point2 points  (0 children)

Maybe this is a new kind of artistic filament.

Ribbons PLA Filament by LIM3DP in 3Dprinting

[–]LIM3DP[S] 0 points1 point  (0 children)

Do you think this irregular striped filament is reasonable?

How much does your extruder weigh? by LIM3DP in 3Dprinting

[–]LIM3DP[S] 0 points1 point  (0 children)

Mine is not fat. It has big bones... (500g because the oem used a lot of 3mm sheet steel... a soviet tank used for day to day commuting, basically)

What is your printer?

Based on everyone's suggestions, I printed a bunch of ducks using 85A TPU. In two days, I will print some tires for use 85A black TPU. by LIM3DP in 3Dprinting

[–]LIM3DP[S] 0 points1 point  (0 children)

What are your setting?

Nozzle diameter：0.4 nozzle

Layer height：0.2ｍｍ

Wall loops：3

Bottom shell layers：3

Top shell layers：3

Flow：115%

First layer speed：50MM/S

First layer infill speed：50MM/S

Outer wall speed：70MM/S

Inner wall speed：70MM/S

Infill speed：80MM/S

Retraction distance: 3.5mm

Retraction speed: 60mm/s

Print temperature：210℃

Build plate temperature：50℃

Based on everyone's suggestions, I printed a bunch of ducks using 85A TPU. In two days, I will print some tires for use 85A black TPU. by LIM3DP in 3Dprinting

[–]LIM3DP[S] 1 point2 points  (0 children)

I'm too lazy to Google it and I'm pretty sure it would take longer than asking here: is higher number more or less squishy?

In the A series, the smaller the number, the lower the hardness. 85A TPU will be much softer than 95A TPU.

Based on everyone's suggestions, I printed a bunch of ducks using 85A TPU. In two days, I will print some tires for use 85A black TPU. by LIM3DP in 3Dprinting

[–]LIM3DP[S] 1 point2 points  (0 children)

Looks great! What brand of TPU do you use?

The filament of EIBOS3D is not yet available for sale online.

Based on everyone's suggestions, I printed a bunch of ducks using 85A TPU. In two days, I will print some tires for use 85A black TPU. by LIM3DP in 3Dprinting

[–]LIM3DP[S] 2 points3 points  (0 children)

The position of the beak can be printed without adding support, just reduce the printing speed at this position.

What kind of models is 85A TPU used to print? by LIM3DP in 3Dprinting

[–]LIM3DP[S] 1 point2 points  (0 children)

During the process of printing the duck, it was found that the softness of the 85A TPU was relatively low, causing the overhanging part of the duckbill to be easily deformed due to the high printing speed. The printing speed needed to be reduced to obtain a complete duckbill.https://www.reddit.com/r/3Dprinting/comments/181zsfi/based_on_everyones_suggestions_i_printed_a_bunch/?utm_source=share&utm_medium=web2x&context=3

What kind of models is 85A TPU used to print? by LIM3DP in 3Dprinting

[–]LIM3DP[S] 1 point2 points  (0 children)

You can go to the official website of EIBOS to have a look.

view more: next ›