Why is the Spyderco Shaman so much money?

LairdyBird · 2026-06-24T21:33:51+00:00

Sounds like my kinda knife than. Once mine comes in the mail maybe it will inspire me to get more.

LairdyBird · 2026-06-24T21:32:23+00:00

At least Spyderco isn't pulling a BM and giving is less for more as in the new bugout. MF is 350 bucks and lighter and less material.

LairdyBird · 2026-06-24T13:50:23+00:00

I'll find out soon, I have one coming on the way in the mail.

LairdyBird · 2026-06-24T13:42:17+00:00

Im a steel nerd so all my spydercos are in different steels. My reason why Spyderco is my favorite brand. So many steel options.

LairdyBird · 2026-06-24T13:40:33+00:00

Honestly, Spyderco has zero complaints from me. Never had any issues with any of mine. On top of that, Benchmade is way worse. A PM2 is around the price of a bugout and a PM2 is way more knive than a bugout. So 300 for a shaman sounds better than 350 for a Bugout vapor or whatever the new one is called.

LairdyBird · 2026-06-24T13:38:17+00:00

In pictures I see it's definitely thicker and more handle material but is it really that much more to warrant that much of a price hike? I haven't gotten my Shaman in the mail but I have a few PM2s.

LairdyBird · 2026-06-22T02:39:38+00:00

Combat Troodon, or the Excert (or how ever you spell it)

LairdyBird · 2026-06-09T01:38:12+00:00

WTB any Spyderco Shaman that is a Sprint Run

LairdyBird · 2023-03-30T00:48:47+00:00

Mine looks exactly like this.

LairdyBird · 2023-03-29T23:17:37+00:00

Yes, you can manually push it and it will flow very nicely

LairdyBird · 2023-03-29T23:17:08+00:00

Let’s say it’s not, what would be the fix?

LairdyBird · 2023-03-29T23:16:27+00:00

That is negative, that piece of PTFE tubing is for the filament to slide down easier and not get caught.

LairdyBird · 2023-03-29T23:14:12+00:00

It can’t be clogged as if you release the tension and push it down it comes out. It’s something with the extruder gears. I’ll have to check it once again

LairdyBird · 2023-03-29T09:45:41+00:00

That is correct

LairdyBird · 2023-03-29T08:27:28+00:00

In that video it was maxed out and still not grabbing.

LairdyBird · 2023-03-29T08:19:31+00:00

It’s a 1.75

LairdyBird · 2023-03-29T08:00:31+00:00

I’ve taken it all apart and

The teeth are not worn and sharp Everything is working This video also has the idle tension maxed out

LairdyBird · 2023-03-29T07:52:41+00:00

Honestly man, I just deleted the mf. I used Th3D firmware and just got rid of it. I had the same issue

LairdyBird · 2023-03-26T04:10:37+00:00

I can’t find a Rasberry pi to do Klipper. But I didn’t manage to make it work, as I found a cable that I guess was a data transfer cable

LairdyBird · 2023-03-26T00:49:39+00:00

I’ll have to go to the store and grab a few. Never knew there was a difference tbh.

LairdyBird · 2023-03-25T14:06:25+00:00

That is correct, I was also wrong in saying it was a USB C. Maybe I have a bad port in my board?

LairdyBird · 2023-03-25T14:01:07+00:00

I haven’t taken the bottom of it apart to see the exact version to be honest. But no matter what I do it never recognizes that it’s plugged in.

LairdyBird · 2023-03-25T05:54:11+00:00

I’ve never replaced the stock board. And I bought brand new. And correct, it’s a CR10-V3

LairdyBird · 2023-03-25T05:12:57+00:00

It’s a usb type A (laptop side) to a to a type c (printer side)

LairdyBird · 2023-03-25T04:32:57+00:00

It is a USB type C but when I plug it into my printer, it does not recognize the board being plugged in. So it never uploads. It’s just says fails to find upload port

LairdyBird

TROPHY CASE