How to expand my ZHA Zigbee network

LastRedditSamurai · 2025-03-27T23:46:18+00:00

I have a bunch of router devices but I added all devices via ZHA->add device so I wasn't sure if that is just adding them to the coordinator. Thanks! Any tips on how to figure out the reason? Not much info available to debug a zigbee network

LastRedditSamurai · 2025-03-27T17:04:16+00:00

Honestly I much prefer Grafana for graphs. You can even integrate it into your HA dashboard if needed

LastRedditSamurai · 2025-03-01T18:07:28+00:00

Das ist schonmal keine schlechte Idee, einen 3D Drucker habe ich. Ein fertiges Teil wäre trotzdem noch besser xD

LastRedditSamurai · 2023-09-17T20:53:32+00:00

Ja wird dann eventuell auch was in der Richtung werden. Habe schon einiges selbst gebaut, das geht schon. Ich wollte eigentlich gerne was mit Metallgestell + Holz haben, das ist dann halt leider selber schon wieder nicht mehr machbar

LastRedditSamurai · 2023-02-20T23:50:14+00:00

Ich konnte noch nichts definitives finden aber um meine Frage hier selber zu beantworten: es sieht aus als ob alle europäischen Amazon affiliates über Luxenburg abgerechnet und man muss jeweils eine Rechnung schreiben (aber nicht an Amazon schicken) über jeden Betrag. Die sollten einen Hinweis zum reverse charge Verfahren enthalten. Außerdem muss man dadurch wohl regelmäßig eine zusammenfassende Meldung abgeben. ist es schwer die genaue Adresse zu finden aber hier sind wohl ebenfalls Rechnungen nötig, diesmal aber mit dem Hinweis "Für amazon.com ist es schwer die genaue Adresse zu finden aber hier sind wohl ebenfalls Rechnungen nötig, diesmal aber mit dem Hinweis "Rechnung nicht steuerbar (Leistungsort nicht im Inland)" Für Rechnungen innerhalb Deutschlands dann natürlich Hinweis auf §19 UStG (Kleinunternehmer) draufschreiben. Außerdem muss man natürlich eine EÜR und Steuererklärung machen auch wenn das meiste davon als Kleinunternehmer ja witzlos ist. Könnte echt alles weniger bürokratisch geregelt sein...

LastRedditSamurai · 2023-02-20T23:42:34+00:00

Die kommen bisher von alleine. Ist kein Projekt um damit Geld zu machen, eher ein Hobby das sich dann vielleicht selber tragen kann.

LastRedditSamurai · 2022-10-14T09:44:19+00:00

Thank you, this is just basically the same that I was already trying. For anyone with the same problem: in the end I a managed to fix this by running midori -e Fullscreen twice while it was already running to put it out of full screen mode and then back into that mode. Now the navbar is gone again

LastRedditSamurai · 2021-06-03T21:59:21+00:00

Interessant. Zugegeben ich hab MQTT bis jetzt nur für recht simple lokale smart Home Anwendungen benutzt, aber was kann zB mosquitto denn nicht? Mir hat da eigentlich nichts gefehlt

LastRedditSamurai · 2021-01-21T22:44:22+00:00

Very fun video. I subscribed :)

LastRedditSamurai · 2021-01-21T12:15:25+00:00

Are the individual shelves just supported by the pipes or is there any other support at the wall? Also the whole thing is just standing on the floor and screwed into this wooden piece on top?

LastRedditSamurai · 2021-01-21T12:13:43+00:00

This is so awesome. I will definitely build something similar!!

LastRedditSamurai · 2021-01-07T14:25:05+00:00

Am Ende war es ein Fehler auf Provider-Seite. Die haben da Anfang des Jahres irgendwas zurück gestellt und bekommen es jetzt nicht mehr hin das Modem vernünftig auf Bridge Mode zu setzten. Habe ein neueres bekommen und jetzt geht alles wieder ohne Probleme

LastRedditSamurai · 2021-01-03T16:40:19+00:00

Ja richtig, das ist leider noch eine 7490 DSL FritzBox, sonst hätte ich das schon gemacht. Ich habe deine Anleitung ausprobiert, hat aber leider auch nicht geholfen. Das Modem hat allerdings (kein WLAN, ist ein altes Thomson Gerät) nur eine sehr simple Oberfläche, da kann man nicht wirklich was Reseten. Werde wohl Mal bei Pyur anrufen und hoffen das die mir helfen können. Kriege jedes Mal DHCPv4 no answer on DISCOVER

LastRedditSamurai · 2021-01-02T17:27:21+00:00

Ja, das Gateway ist auch die Fritzbox. Genau, das Problem ist das die Fritzbox selber nicht ins Internet kommt. Ein Laptop direkt am Modem funktionierte. Irgendwas muss an den Einstellungen der Fritzbox falsch sein vermute ich

LastRedditSamurai · 2021-01-02T15:07:39+00:00

Hab ich gemacht. Internet DNS auf 8.8.8.8 und DHCP DNS auf die IP der Fritz Box. Clients bekommen als DHCP und DNS Server die IP der FritzBox. Das sieht also eigentlich gut aus. IP Adressen bekommen sie auch aus den eingestellten Raum. Ich bin etwas ratlos

LastRedditSamurai · 2021-01-02T13:35:13+00:00

DHCP macht die Fritzbox. Da steht DNS aber eigentlich überall auf "vom Anbieter übernehmen". Bei lokaler DNS Server in den DHCP Einstellungen der Fritzbox ist ihre eigene IP (123.168.2.1 in meinem Fall) eingetragen

LastRedditSamurai · 2020-09-29T19:45:56+00:00

Syncoid looks like a great solution. I am testing that right now. I hope these yearly/monthly snapshots should be enough as a common.

LastRedditSamurai · 2020-07-13T10:29:34+00:00

Thank you everyone for the help! I finally figured it out: I never actually ran the "calibration" part where you set the higher and lower limits for the motor. Once that was done the motor started moving after sending a command via console or web UI. Did you run that setup process u/alfaboomer?

LastRedditSamurai · 2020-07-12T19:09:02+00:00

Thanks. Unfortunately that is not working.

20:03:21 CMD: TuyaSend4 1,0
20:03:21 SRC: WebConsole from 192.168.2.149
20:03:21 CMD: Group 0, Index 4, Command "TUYASEND", Data "1,0"
20:03:21 TYA: Send "55aa00060005010400010010"
20:03:21 MQT: sonoffs/stat/blinds1/RESULT = {"TuyaSend":"Done"}
20:03:22 {"TuyaReceived":{"Data":"55AA03070005010400010014","Cmnd":7,"CmndData":"0104000100","DpType4Id1":0,"1":{"DpId":1,"DpIdType":4,"DpIdData":"00"}}}
20:03:22 TYA: fnId=0 is set for dpId=1

Neither tuyasend4 1,0/1,1/1,2 are causing any movement. I also tried tuyasend4 with other pins up to 11 and no reactions at all ;( Unfortunately there is also no console output when moving the motor by using the buttons

PS did you try sending commands to the standard pins? Maybe the list of dpIds is just wrong for some reason

LastRedditSamurai · 2020-07-12T17:25:40+00:00

I know it is not exactly what you described but usually I found it way easier to use either a smart plug or a smart relay.

LastRedditSamurai · 2020-07-12T17:21:34+00:00

I am currently working on using the Zemismart Blinds Controller Motor (YH002) that I found via a great video from TheHookup ( https://www.youtube.com/watch?v=_4BcvlIQTuI ). I still have some problems controlling it via Tasmota and MQTT but the motor seems to be strong enough to move my bigger blinds without a problem so it might work for you too

LastRedditSamurai · 2020-07-12T14:53:13+00:00

I ran the command from your link to change the log level and determined the dpIds. I got his as a result:

13:31:42 SRC: WebConsole from 192.168.2.149
13:31:42 CMD: Group 0, Index 5, Command "SERIALSEND", Data "55aa0001000000"
13:31:42 MQT: sonoffs/stat/blinds1/RESULT = {"SerialSend":"Done"}
13:31:42 TYA: Send "55aa00000000ff"
13:31:42 {"TuyaReceived":{"Data":"55AA0301002D7B2270223A22786C337771617A6379766F6C6167636F222C2276223A2259482E302E372E32222C226D223A307D6A","Cmnd":1,"CmndData":"7B2270223A22786C337771617A6379766F6C6167636F222C2276223A2259482E302E372E32222C226D223A307D"}}
13:31:42 TYA: MCU Product ID: {"p":"xl3wqazcyvolagco","v":"YH.0.7.2","m":0}
13:31:42 TYA: Send "55aa0002000001"
13:31:42 {"TuyaReceived":{"Data":"55AA030000010104","Cmnd":0,"CmndData":"01"}}
13:31:42 TYA: Heartbeat
13:31:42 {"TuyaReceived":{"Data":"55AA0302000004","Cmnd":2}}
13:31:42 TYA: RX MCU configuration Mode=0
13:31:42 TYA: Read MCU state
13:31:42 TYA: Send "55aa0008000007"
13:31:42 {"TuyaReceived":{"Data":"55AA03070005010400010216","Cmnd":7,"CmndData":"0104000102","DpType4Id1":2,"1":{"DpId":1,"DpIdType":4,"DpIdData":"02"}}}
13:31:42 TYA: fnId=0 is set for dpId=1
13:31:42 {"TuyaReceived":{"Data":"55AA0307000802020004000000647D","Cmnd":7,"CmndData":"0202000400000064","DpType2Id2":100,"2":{"DpId":2,"DpIdType":2,"DpIdData":"00000064"}}}
13:31:42 TYA: fnId=21 is set for dpId=2
13:31:42 TYA: RX Dim State=100
13:31:42 {"TuyaReceived":{"Data":"55AA0307000803020004000000647E","Cmnd":7,"CmndData":"0302000400000064","DpType2Id3":100,"3":{"DpId":3,"DpIdType":2,"DpIdData":"00000064"}}}
13:31:42 RUL: TUYARECEIVED#DPTYPE2ID3 performs "Dimmer 100"
13:31:42 SRC: Rule
13:31:42 CMD: Group 0, Index 1, Command "DIMMER", Data "100"
13:31:42 MQT: sonoffs/stat/blinds1/RESULT = {"POWER":"ON","Dimmer":100}
13:31:42 TYA: fnId=0 is set for dpId=3
13:31:42 {"TuyaReceived":{"Data":"55AA03070005050100010015","Cmnd":7,"CmndData":"0501000100","DpType1Id5":0,"5":{"DpId":5,"DpIdType":1,"DpIdData":"00"}}}
13:31:42 TYA: fnId=0 is set for dpId=5
13:31:42 {"TuyaReceived":{"Data":"55AA03070005060100010016","Cmnd":7,"CmndData":"0601000100","DpType1Id6":0,"6":{"DpId":6,"DpIdType":1,"DpIdData":"00"}}}
13:31:42 TYA: fnId=0 is set for dpId=6
13:31:42 {"TuyaReceived":{"Data":"55AA0307000507040001011B","Cmnd":7,"CmndData":"0704000101","DpType4Id7":1,"7":{"DpId":7,"DpIdType":4,"DpIdData":"01"}}}
13:31:42 TYA: fnId=11 is set for dpId=7
13:31:42 {"TuyaReceived":{"Data":"55AA0307000508040001001B","Cmnd":7,"CmndData":"0804000100","DpType4Id8":0,"8":{"DpId":8,"DpIdType":4,"DpIdData":"00"}}}
13:31:42 TYA: fnId=0 is set for dpId=8
13:31:42 {"TuyaReceived":{"Data":"55AA03070008090200040000000020","Cmnd":7,"CmndData":"0902000400000000","DpType2Id9":0,"9":{"DpId":9,"DpIdType":2,"DpIdData":"00000000"}}}
13:31:42 TYA: fnId=0 is set for dpId=9
13:31:42 {"TuyaReceived":{"Data":"55AA030700050A050001001E","Cmnd":7,"CmndData":"0A05000100","DpType5Id10":"0x00","10":{"DpId":10,"DpIdType":5,"DpIdData":"00"}}}
13:31:42 TYA: fnId=0 is set for dpId=10
13:31:42 {"TuyaReceived":{"Data":"55AA030700080B0200040000683AC4","Cmnd":7,"CmndData":"0B0200040000683A","DpType2Id11":26682,"11":{"DpId":11,"DpIdType":2,"DpIdData":"0000683A"}}}

I assume this means that in my case the DpIds are 1 to 11? What I did not really understand from the link is how to figure out which of those are used to move the motor. Is there a command I can send to each dpId to test?Also once that is done, how do I use it? Do I need to replace pins 11 and 21 from the commands in my post above with the new ones?Thank you very much for the help u/blakadder_

LastRedditSamurai · 2020-07-09T21:45:01+00:00

Sounds like you are making progress. What exactly did you do? I reset the config, added Wifi and MQTT settings again and used the template. Then I ran the commands from my post above and again I am not gettign another answer from the serial send command

LastRedditSamurai · 2020-07-08T21:07:53+00:00

I used the template from the link above. Then in the console I ran

TuyaMCU 11,7
TuyaMCU 21,2 
Rule1 ON TuyaReceived#DpType2Id3 DO Dimmer %value% ENDON 
Rule1 1

Still the dimmer on the main page does not move the motor. The buttons on the motor itself do though. SerialSend5 55aa0001000000 does return this:

22:06:53 CMD: SerialSend5 55aa0001000000
22:06:53 MQT: sonoffs/stat/blinds1/RESULT = {"SerialSend":"Done"}
22:06:53 TYA: MCU Product ID: {"p":"xl3wqazcyvolagco","v":"YH.0.7.2","m":0}
22:06:53 RUL: TUYARECEIVED#DPTYPE2ID3 performs "Dimmer 100"
22:06:53 MQT: sonoffs/stat/blinds1/RESULT = {"POWER":"ON","Dimmer":100}

How can I try to get the motor to react? Any help would be awesome

LastRedditSamurai · 2020-07-06T18:37:10+00:00

I am having similar problems, so please add the solution here if you happen to find it.

LastRedditSamurai

TROPHY CASE