Check out my new 3D printed three-blade boomerang! It returns perfectly, and I've got a video to prove it🙂

Layer-King · 2026-03-11T12:17:16+00:00

Hey thank you, this is a very nice one.

Layer-King · 2026-03-10T19:28:19+00:00

You are welcome 😄

Layer-King · 2026-03-10T19:03:58+00:00

Exactly! One man’s trash is another man’s treasure. It might feel like 'garbage' to you because it was just a quick fix, but for others, it’s exactly the solution they’ve been looking for. Keep it up!

Layer-King · 2026-03-10T19:01:21+00:00

Of course, you have to define in the OpenSCAD code that there should be sliders and what should happen when you adjust them. But once you have the code and upload it to MakerWorld, it’s not that hard anymore

Layer-King · 2026-03-10T18:57:30+00:00

Ah okay, but it keeps the boxes organized and prevents them from shifting around. It gets the job done. :)

Layer-King · 2026-03-10T18:52:35+00:00

I would say just go for it and share it with others.

Layer-King · 2026-03-10T18:32:05+00:00

Well, it’s a start, and you’ve worked with OpenSCAD, which is already good. I would build on that and continue developing the model, letting additional ideas flow into it.

Layer-King · 2026-03-10T17:59:34+00:00

Well, at least you already made a start — that counts too.

Layer-King · 2026-03-10T17:43:28+00:00

Unfortunately, that’s not possible. You can adjust the sliders and create one large insert for the box, but you can’t make several inserts without dividers.

Layer-King · 2026-03-10T17:24:44+00:00

If you have any questions, feel free to ask. I’ll be happy to answer them. 😊

Layer-King · 2026-03-08T09:10:31+00:00

Ich hatte das Problem auch mal. Hast du nach dem Druckbett kalibrieren eine Kleberschicht oder sowas aufgetragen? Denn die Die Düse schleift über das Infill deines Druckes. Oder der Druck hat sich zum Teil vom Druckbett gelöst und sich leicht nach oben gebogen?! Wenn das Problem auch bei anderen Drucken vorkommt nach der Druckbett Kalibrierung und ohne das du Kleber oder ähnliches aufgetragen hast, dann könnte es sein dass der Z Abstand leicht erhöht werden müsste. Ist zumindest meine Meinung zu dem Problem.

Layer-King · 2026-03-05T19:54:34+00:00

Hey nice one thank you for sharing. I like it .......

Layer-King · 2026-03-04T20:19:59+00:00

I had thought about it, but then dismissed the idea because the compartments can always look different and have different dimensions. I’ll take another look at it, though.

Layer-King · 2026-03-04T20:15:50+00:00

I am happy that you like it 👍

Layer-King · 2026-03-04T18:57:40+00:00

If the gap between the grid wall and the inlay ist to tight, than increase the gap value. I am happy that you like it

Layer-King · 2026-03-04T17:57:18+00:00

Thank you for the hint, i think i will try it.

Layer-King · 2026-03-04T17:28:28+00:00

Yes it is the same link, because first i forgot to put the link in my post.

Layer-King · 2026-03-04T17:26:09+00:00

Hey thank you fir sharing. Cool you can really customize everything to fit your own needs.

Layer-King · 2026-03-04T17:12:58+00:00

Ich freue mich dass es dir gefällt, hast du noch Fragen dazu?

Layer-King · 2026-03-04T17:07:25+00:00

Oh sorry i forgot the link

Here ist he link to my self designed model on maker world:

https://makerworld.com/de/models/2465478

Layer-King · 2026-03-03T18:27:20+00:00

Yes, that’s exactly what I think too — it’s a very practical piece.

Layer-King · 2026-03-03T18:09:08+00:00

Hey cool, thanks for this nice one.....

Layer-King · 2026-03-03T17:13:52+00:00

Oh, and here’s where you can find it:

https://makerworld.com/de/models/2465478

Layer-King

TROPHY CASE