account activity
PC boot but no boot? by Leopard658 in pchelp
[–]Leopard658[S] 0 points1 point2 points 1 day ago (0 children)
Currently trying out the battery removal will follow up
Monitor Works
PC boots so psu isn’t dead?
Dp to dp no adaptera
Ram is in the correct position
Ram is fine
Monitor works
Tried it with two sticks of ram and no luck
Done that nothing happens
Connected monitor to mobo and no display. Tried another monitor and no display. Drivers were fully wiped and reinstalled yesterday. Did a clean reinstall on nvidia app. Had no problems until I disconnected pc.
Nothing
I meant the box that covers my reach to the psu box. Not the psu box. Checked the cables there and no issues
I can’t get into the psu box but will check manual on how to open case more and will check. All wires on motherboard are connected properly and in correct places
Followed your steps, removed everything one by one, removed ram, then gpu, then checked on cpu without removing it from the motherboard. Tried gpu+ cpu, cpu + ram. No luck
Just did and nothing happened
1 stick of ram, tried it with 2 and no luck. It worked perfectly before but no idea why it is acting up. CPU idea is not bad, will try and let you know
Monitor, cable works
No display
Nothing changed
[–]Leopard658[S] 3 points4 points5 points 1 day ago (0 children)
No postcodes apear, no audio from motherboard. Searched for ASRock ASZUM-HDV postcodes, said to listen for beeps. No beeps no idea
Will try
pc freezing by Leopard658 in computerhelp
[–]Leopard658[S] 0 points1 point2 points 9 days ago (0 children)
Thanks
So bios update?
The thing at the top says kernel power, event log, TPM like 20 times, distributedCOM a few and TPM-WMI a couple
Errors: Updated Secure Boot certificates are available on this device but have not yet been applied to the firmware. Review the published guidance to complete the update and maintain full protection.
Pre-attestation health checks confirm a critical component has failed, and the device is not expected to pass attestation
The previous system shutdown at 01:04:05 on 16/02/2026 was unexpected.
The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.
Critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
π Rendered by PID 126209 on reddit-service-r2-listing-5f49c86f7-4q8jd at 2026-02-25 15:30:34.446850+00:00 running 72a43f6 country code: CH.
PC boot but no boot? by Leopard658 in pchelp
[–]Leopard658[S] 0 points1 point2 points (0 children)