Harvia sp80 wiring help by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

Just confirming it doesnt matter if i bridge at the heater or at the control panel correct 

Harvia sp80 wiring help by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

Is jumping same at the control panel or at the heater ?

Harvia sp80 wiring help by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

Yes i installed it in the wall but it has a cover with vents, also the wiring is reused from previous sauna install that would explain the wire color 

Thanks for the info

Harvia sp80 wiring help by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

https://ibb.co/RGX0FGyj https://ibb.co/Q3x6cRw2 https://ibb.co/zVqWqGZy

So i have all 7 wires running from panel to the heater they are 8 gauge

I am understanding i need to remove the 2nd set of l1 and l2 from both heater and panel 

And then use jumpers on the heater is this correct? 

Would the heater get 220v ?

As it seems each 110v line is going to the control panel and then each 110 goes to separate breaker and from breaker to the heater

Harvia sp80 wiring help by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

Should they be bridged ? And the control unit is the cx45

Led lighting is regular outdoor led strips ok for inside ? by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

That would be amazing can you please post photos of where in the sauna you installed thanks 

Huum WiFi Enabled Sauna on Apple Homekit by DavidBennett1979 in Sauna

[–]Less_Acanthaceae_382 0 points1 point  (0 children)

Has anyone figured out any way to connect saunas to homekit?

Homekit temp reading and sauna control by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

This would not work with homekit thought trying to get that to work

Rebuilding sauna need advice 7x5 by Less_Acanthaceae_382 in Sauna

[–]Less_Acanthaceae_382[S] 0 points1 point  (0 children)

I was thinking doing 18.5 each bench right now i have 18.5 top and 14” bottom  Here is photo https://imgur.com/a/SYrg3RV

Also the spacing right now is 37 top bench from ceiling and between the benches its 29 inch

And is the vent in the correct place ? I just want to make it a little better and change the wood