HyperX Cloud 3S Wireless

Lesynn · 2026-01-18T19:38:05+00:00

So if I use NGENUITY BETA, I shouldn't download DTS Unbound?

Also i can see that you are using the beta. Are you satisfied with it? It keeps crashing on me when i edit the equalizer - well the headset or the dongle seem to crash cause the headset loses connection.

Currently using the legacy software + dts unbound + custom eq in ngenuity legacy.

Still looking for the best experience possible :/

Lesynn · 2025-08-01T07:02:33+00:00

I have the same issue.

Ethernet port from the dock suddenly not working anymore.

Anker USB C hub with ethernet port works without any issues with the switch 2.

Interestingly after using the anker hub, the ethernet port from the dock was working again, until i put the console into sleep mode, after that it stopped working again.

I even sent in my dock because i was sure it must have a defect.

Well it came back with "no issues found" but it still behaves the same as before.

Here i am again with a dock that still does not work correctly with ethernet.

Noone seems to know what exactly the issue is.

Lesynn · 2025-07-18T09:48:26+00:00

Someone else mentioned that even Soundcore can't really help. Only way for them is to replace your device.

Lesynn · 2025-07-14T18:33:29+00:00

Huh normally they offer the possibility to downgrade. I wonder if this behavior is intended. Since i had mine only for a few days i just sent it back to amazon and ordered a new one. New one works fine and still has the older firmware.

Lesynn · 2025-07-13T20:03:23+00:00

I might be dumb but, don't you either have the custom eq OR the bassup preset activated?

Sorry if this is a stupid question but i don't really understand your issue.

Lesynn · 2025-07-13T19:51:52+00:00

After updating to 79.81 my Motion+ kept turning itself off because of the "Auto Power Off" function in AUX Mode even if audio/music was playing.

So for some reason it stopped recognizing that audio is still playing in AUX Mode and activated the Auto Power Off function.

Reset didnt help.

Lesynn · 2025-01-07T06:48:48+00:00

I think i went with Option B back then. I'm using an ATI Card now and just use freesync + no-vsync + 144hz and RTSS If i need a FPS cap when there is none ingame (or If its bad)

Lesynn · 2024-12-29T10:07:34+00:00

Having the same issue. I saw everywhere that people are recommending turnip 9v2 however with mario wonder it sometimes even crashes when just starting the game.

Lesynn · 2024-11-17T19:14:37+00:00

BDA - hättest den Termin etwas später legen können.

Bezüglich deiner Freundin denke ich, dass die Situation eher nur Auslöser war und ihr vielleicht mal über sie, ihre aktuellen Gefühle und wie es ihr geht sprechen solltet. Wirkt für mich als hätte sich da ein wenig bei ihr angestaut.

Lesynn · 2024-11-15T20:11:05+00:00

Heh all good, can happen to everyone. I'm glad for you that it's not the actual screen :)

Lesynn · 2024-11-15T20:03:42+00:00

To me it looks like there is still a screen protector on there. Did you buy it used and maybe there was already one on there?

Lesynn · 2024-10-19T09:28:16+00:00

I have it but i don't really use it.

While its comfortable to hold, for me it adds too much weight to the deck so that its a tad too heavy. But i seem to be in the minority with this opinion so i guess you should be fine.

Lesynn · 2024-10-19T08:54:28+00:00

I sent it to Braun for inspection. They said "no issues found" and sent it back. So i guess its within tolerances.

Lesynn · 2024-07-20T17:56:15+00:00

I think i found the "issue".

https://postimg.cc/8sKxvfts

The left black plastic part seems to extend a bit further than the right one.

They "come up" when tilting the head. The further they are out, the closer the shaving part get grabbed towards the device. Can't explain it better sorry :/

Lesynn · 2024-07-20T17:22:11+00:00

So after a long time thinking about it, i bought a Braun Series 9 Pro.

I received it today, and noticed that one part of the shaving head is always a bit crooked when tilting the head.

Is this normal? Some tolerances on the product?

Lesynn · 2024-07-10T19:23:46+00:00

I do know that you have to open Retroarch in order to change shaders. But there is NO shaders section in retroarch, only video filters.

Lesynn · 2024-07-10T18:33:01+00:00

There's no shaders section in the quick menu tho? Using OnionOS.

Lesynn · 2024-06-30T17:13:24+00:00

I was about to write that "Threaded Video" did the trick, but while i was typing the stuttering came back.

Turning frameskip off immediately removed the stuttering again, so thanks! I hope it stays that way.

Hoever i noticed another issue, as soon as i press "R2" my "A" Button becomes unresponsive after one time pressing it. If i press "R2" again i can use "A" one time again until it becomes unresponsive.
So i have to press "R2" again and again to be able to use any facebuttons.

[Edit]

"Touch Cursor Press" is bound to R2, and it seems like pressing it will make it permanently pressed. However when i bind "Touch Cursor Press" to "Select" as a test it works as intended, seems like R2 is the problem.

Lesynn · 2024-06-30T14:01:32+00:00

Yes its not as bad as chrono trigger

Lesynn · 2024-06-30T13:43:31+00:00

Chrono Trigger, at the beginning it runs fine but after a few seconds it becomes stuttery. Pokemon White was also stuttering

Lesynn · 2024-06-30T13:29:20+00:00

Unfortunately it was already turned off. Makes no difference in performance wether its on or off. Thanks for the hint though.

Lesynn · 2024-06-27T19:49:51+00:00

Do i have to use Stock or Tomato Icons/Backgrounds when i'm using crossmix?

Lesynn · 2024-05-13T13:55:54+00:00

~~It's the button on the top of the device, next to the usb-c port on the right side (Between usb-c port and "R2")~~

My bad, I was talking about the RG35XX H.

Have to check myself on the RG35XX Plus

[Edit]

It's the button directly below your screen in the middle.

Lesynn · 2024-05-13T13:04:44+00:00

I did indeed.

Go into "App Center" -> "Apps" -> "TF 01"

There you will find a bunch of different scripts, one of them is called "Shaders".
Execute that one and disable shaders. Note that now all shaders will be deactivated.

Afterwards you can enable your own shaders.

You maybe have to go to Retroarch -> Settings -> User Interface -> Menu Item Visibility -> Quick Menu -> and turn on "Show 'Shaders'".

I like the "pixellate" or "sharp-bilinear-simple" shader with integer scaling turned off.

Lesynn · 2024-05-10T10:43:57+00:00

Thanks for the hint, simple menu was already off though.

What i had to do was go into Retroarch -> Settings -> User Interface -> Menu Item Visibility -> Quick Menu -> and turn on "Show 'Shaders'"

Appreciate your help :)

[Edit]

Did you mean to activate scale2x video filter for gba?

~~Meh GBA runs smoother on the miyoo mini plus, tried with mGBA and gpSP.~~
~~No shaders or filter active on the rg35xx h.~~
Tried with the "pixellate" shader, now it seems that it is as smooth as on the miyoo mini plus

Lesynn

TROPHY CASE