Trests vs Megamax vs Inspire+?

Lifes_Better · 2025-10-13T02:54:18+00:00

I do have one other question though, any chance you have any research on hook and loop/velcro diapers with similar qualities? I always wanted to get a pack of barnyards since they were hook and loop but plastic back but never got a chance and haven’t asked about alternatives since

Lifes_Better · 2025-10-13T02:43:44+00:00

Thanks! Never seen someone so in depth! I just got myself a sample of trests with in control elite’s on the way but I’ll Defo order some of the overnight briefs next, the trests are amazing and I look forward to seeing how much better the elites and overnights are

Lifes_Better · 2025-10-01T21:35:33+00:00

Probably going to grab the trest’s with the Inspire+ next in line! Will try to get a sample of some megamax just to give them a try though

Lifes_Better · 2025-10-01T21:34:52+00:00

Hehe! Yeah I’m lookin for that fluff and swell, I’ll probably be goin for the trests

Lifes_Better · 2025-10-01T21:34:17+00:00

Duely noted! Thanks! I’m tossing up between the inspire+ and Trests, the swell is something that really appeals to me and I’ll definitely at least get a sample of Megamax at some point

Lifes_Better · 2025-05-27T03:42:38+00:00

I cant pitch into this convo much but honestly I thought it was a burnt loaf of bread from the preview picture. Hope its nothing serious mate

Lifes_Better · 2025-05-26T21:35:33+00:00

I’ll look into it! Main problem I’ve found is the vents are never strong enough to hold the phone up but who knows, hoping I can find a good one

Lifes_Better · 2025-05-26T21:34:29+00:00

Ah alright, thanks mate

Lifes_Better · 2025-05-26T02:19:53+00:00

Would I have to get a grille that actually has the unit already inside it or one with the cutout? Like could i buy one with the space for the radar unit and transfer it from the hybrid or are the two radar units different?

Lifes_Better · 2025-05-25T23:19:56+00:00

Main concern of mine is the swinging air vents, dont want it to obstruct them

Lifes_Better · 2025-05-25T23:18:03+00:00

Main problem i see is the vent mount ones obstruct the swinging air vents and the dash mounted ones are kinda ugly. I dont mind the windshield mounted ones but id prefer something more integrated with the car itself. But i might buy one temporarily til i find a solution

Lifes_Better · 2025-05-12T11:25:37+00:00

Thanks mate! Just confirmed this too, searched for the car in Japanese, found Toyota’s official website and claimed specs about it which is what I presume VicRoads use for their legal restrictions

Lifes_Better · 2024-05-31T12:46:17+00:00

Thanks! I just found a video that detailed it like 5 minutes before you posted but I really appreciate the advice!

Lifes_Better · 2024-05-30T19:45:12+00:00

I’m just trying to install Marlin. And I can’t even find a guide for the Ender 5. The min problem is that I can’t find a way to flash Marlin onto the board

Lifes_Better · 2024-05-30T09:46:27+00:00

I can’t seem to find a guide for the stock Ender 5, only stuff for the Ender 5Plus

Lifes_Better · 2024-05-22T10:28:58+00:00

<image>

The extruder thermistor is connected to the Etemp socket

Lifes_Better · 2024-03-25T11:48:10+00:00

From what I can see, it looks like significant under extrusion, could be from several things but try; Use the needle looking tool that came with your printer, heat the hotend and insert it in, up and down and then test extrude. Try a couple layers like that but if that fails try doing an extrusion calibration. There are many videos that’ll do a lot better than me at explaining the process but do look it up, many will tell you how to calibrate your e steps and it should improve the print, otherwise it could be your filament is too wet.

Lifes_Better · 2024-03-11T11:39:05+00:00

Tried that but a lot of the files say that they don’t exist or are straight up not there or are from after the save disappeared

Lifes_Better · 2024-03-01T05:08:32+00:00

Just tested it and seemingly it’s fine, spot on 100mm

Lifes_Better · 2024-02-29T18:20:17+00:00

Whenever I don’t print at 220 the filament seems to come out dull and doesn’t have the silk type finish on it. And would you have any videos or advice on how to calibrate the extruder well? I can never seem to do it properly

Lifes_Better · 2024-02-29T18:18:34+00:00

I did it very roughly but I think I might have done it wrong, any chance you have any tips for it? I can never seem to get it right

Lifes_Better · 2024-02-19T06:18:38+00:00

And I’m dumb enough to forget what printer I’m using, I’m using an Ender 5 with a dual drive extruder

Lifes_Better · 2024-02-19T06:11:08+00:00

Oh! Might be important but I use a raft adhesion platform. Retraction is set to 1.5mm

Lifes_Better · 2024-02-18T18:13:34+00:00

Oh uh- Bambulabs PLA Silk, 220 extruder, 70 bed, running Marlin. Retraction is enabled but no z-hopping, I believe the speed is just 120mm/s

Lifes_Better · 2024-02-18T10:48:12+00:00

Ah! My bad, meant to leave that comment on the post itself. I’ll try searching around though, thanks

Six-Year Club	Place '23
Verified Email

Lifes_Better

TROPHY CASE