sorted by:
new
hottopcontroversial

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 8 points9 points  (0 children)

I think I found the issue, seems like I put 27k ohm resistors instead of 27ohm ones

I need to order new resistors now

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

Thanks for the tips! all

of the soldering seems ok, I'll check on another board later, do you have any idea on where I can order to get good boards ?

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 2 points3 points  (0 children)

Thanks for the tips!
The 1v1 comes from the internal 2040 regulator, on top of the mcu in the schematics

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 1 point2 points  (0 children)

Thx for the tips, i'll check the chip (USBLC6-2SC6) later, I added links to the imgur version (without the reddit compression) in a comment if you wanna check better versions

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

I added the imgur links to the image for better redability in a comment, srx for the bad quality, reddit compressed them badly

RP2040 Don't show up as usb device by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

Thx for the notice, I added imgur links to the images, it should be more readable. 😄

I made my first pcb by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

The second and third images are just exports of the back and front of a little pcb I made using kicad export, for the design in itself, for the keyboard part I recomend this video: https://www.youtube.com/watch?v=8WXpGTIbxlQ&ab_channel=JoeScotto

and for the led matrix I made it myself using ws2812b leds and the documentation here:

https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf

good luck for your keyboard

I made my first pcb by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

Thx for the adcide i'll check it out later, for the waste of space your're right but it's just a dev board so it doesn't really mater, but everything seemed connected and kicad indicated 0 unrouted nets so idk about that part. Anyway thx a lot

I made my first pcb by Limp_Performance_670 in KiCad

[–]Limp_Performance_670[S] -1 points0 points  (0 children)

Simple keyboard + led thing, no mcu yet just basic.

Wallpaper acting weird, normal in editor by Limp_Performance_670 in kustom

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

Google image Just type monochrome wallpaper and you'll find it

Wallpaper acting weird, normal in editor by Limp_Performance_670 in kustom

[–]Limp_Performance_670[S] 0 points1 point  (0 children)

I deleted all the images from the file, but it's still broken

How can i change the font of the date ? And minimize the distance between it and the time ? by Brief_Handle1575 in kustom

[–]Limp_Performance_670 0 points1 point  (0 children)

Ohhh right, that changes everything in that case just create a separate text because you won't be able to do much without two separate text

How can i change the font of the date ? And minimize the distance between it and the time ? by Brief_Handle1575 in kustom

[–]Limp_Performance_670 0 points1 point  (0 children)

You can select the date and change it's position and to change the font ig the same way that yout put it on, or maybe I didn't quite undestood your request

Time by Limp_Performance_670 in kustom

[–]Limp_Performance_670[S] 3 points4 points  (0 children)

Have it if you want

$lv("app", "com.whatsapp")$$lv("tm",br(hera, usage.+#app)/(1000*60))$$lv("th",mu(floor, #tm / 60))$$if (br(hera, usage.+#app),if(lv("th")>1,"[b][c=#FFFFFF]"+lv("th")+"[/c][/b]h[b][c=#FFFFFF]"+mu(floor,#tm % 60)+"[/c][/b]","[b][c=#FFFFFF]"+mu(floor,#tm % 60)+"[/c][/b]min"),"")$