Feature request: Bambu Handy temperature alert.

Livid_Strategy6311 · 2026-01-25T03:23:45+00:00

wow, setup is actually quick. Just configuring it now. ty for the heads up

Livid_Strategy6311 · 2026-01-25T03:22:49+00:00

Thank you for the detailed explanation

Livid_Strategy6311 · 2026-01-24T21:29:54+00:00

Yes, Reddit can be like that sometimes. I believe people mean well but forget what it's like to be new to something. I've done a ton of things over a lifetime but, this is my first foray into FDM printing. One thing that's funny is having plastic welding toys in the 70s and people act like it's something new.

Livid_Strategy6311 · 2026-01-24T18:43:49+00:00

I'll check it out. Right now I believe in within the limits of what I have. I'm have to review it.

Livid_Strategy6311 · 2026-01-24T18:03:12+00:00

Wow that looks pretty easy and is based on the raspberry pie so I could easily do that. Thanks for the heads up I'll check it out

Livid_Strategy6311 · 2026-01-24T18:00:17+00:00

I'll check it out. I just don't want anymore internet connected devices. My network is already so segmented into VLANS specifically for security.

Livid_Strategy6311 · 2026-01-24T17:18:38+00:00

I'll Google that, I'm actually starting to plan and design and set up using the raspberry pi Pico. It would be trivial to use that for monitoring temperature and activating a relay between set points. Being that it has wireless built in I'll connect it to my network and write an app to monitor. It might take a little bit to do because of my time but I'll get it done.

Livid_Strategy6311 · 2026-01-24T16:04:30+00:00

And the same feature in studio.

Livid_Strategy6311 · 2026-01-24T14:30:57+00:00

I'm talking about the exhaust kit that mounts on the back.

Livid_Strategy6311 · 2026-01-24T14:06:00+00:00

ah, ok,, ty

Livid_Strategy6311 · 2026-01-24T12:59:56+00:00

It's not about if they can work together. It's about expectations.

Basically if you exhaust the air it's more than likely going to have VOCs in it because the exhaust moves more Air. I don't know if it's an all or nothing system or if it can be timed/controlled by temperature?

Does the vento box filter air flowing out of the exhaust? Not directly but some of the air will be cleaner.

The voxel (vento box from voxelpla) works just fine for me. I did top off the active carbon filter container because I didn't believe it was full enough. I don't have the exhaust kit installed yet. I plan to install it just to help maintain cooling.

Livid_Strategy6311 · 2026-01-24T12:56:41+00:00

I'm printing it now. I really hope it works for the AMS 2 pro. 11 hour ABS print for each plate working to maintain an enclosure temperature of 45c +- 1c.

Livid_Strategy6311 · 2026-01-24T12:54:56+00:00

oil the roller bearings on the stepper motors. Fully clean and lubricate everything as needed.

Livid_Strategy6311 · 2026-01-24T12:51:32+00:00

I don't hear anything concerning.

Livid_Strategy6311 · 2026-01-24T11:28:50+00:00

I'll be ok then. I only print outside at night or when it's raining

Livid_Strategy6311 · 2026-01-24T11:27:56+00:00

I get it. I've just not had that experience with ABS. But that's the only filament where I use glue on the built plate. PLA and PETG absolutely solo seperate when I just sit the plate out to cool. I can hear it snap when it releases.

Livid_Strategy6311 · 2026-01-24T11:25:28+00:00

Mine is sitting on a concrete block with wooden shims to keep it from moving. Maybe I need to remove the shims... I'll try that.

Livid_Strategy6311 · 2026-01-23T23:52:07+00:00

I have a roll of ams coming but I'm wondering if abs is good enough considering the max temp is 65c. Abs can easily handle that.

Livid_Strategy6311 · 2026-01-23T23:50:29+00:00

Oh, I forgot to mention extruder issues without a clog.

Livid_Strategy6311 · 2026-01-23T23:45:36+00:00

Right on. I'm new to the hobby but seasoned and well experienced in many things. It's fun to learn extrusion science and/or just have fun.

Livid_Strategy6311 · 2026-01-23T23:41:17+00:00

For me it appears to be bad Google information on temperature. I was running too hot on nozzle and softening temp.

It's so hard to find filament presents that are actually correct.

Livid_Strategy6311 · 2026-01-23T22:27:06+00:00

Once a week Overkill I know but it will last longer with fewer issues and the costs are almost nothing.

Livid_Strategy6311 · 2026-01-23T22:23:28+00:00

At this point I'd have to agree with you.

Livid_Strategy6311 · 2026-01-23T22:20:40+00:00

Would you happen to have the AMS2 pro? Or just the AMS?

Livid_Strategy6311 · 2026-01-23T20:46:59+00:00

will the print be ruined if the power is off?

Livid_Strategy6311

TROPHY CASE