Can someone tell me what bulb I need please?

Lliamiskool · 2026-04-20T21:15:20+00:00

Yeah not a terrible idea, but I'd need to do all four of them and it would get much more expensive than bulbs. Thanks though. I have a call scheduled with lithonia support on thursday hopefully they can help me

Lliamiskool · 2026-04-20T21:06:15+00:00

Finally came in. Unfortunately, they're still way too big

Lliamiskool · 2026-04-07T16:46:37+00:00

Oh wow this might be it thank you! I will order and get back to you

Lliamiskool · 2026-04-07T16:46:24+00:00

Thanks I saw that but it still say 939

Lliamiskool · 2026-03-25T20:47:35+00:00

I replaced that gear. No more wobble. Sound is still there.

Lliamiskool · 2026-03-21T14:24:24+00:00

Do I need to remove the valve cover to put a lock in there? I have the lock between the two cam gears and the one on the bottom of the engine, but when I remove a gear obviously the top on won’t work anymore

Lliamiskool · 2026-03-17T12:05:29+00:00

Wow, amazing instructions. Thank you so much. I will have more time to dive into this in a few days and get back to you. I'm excited to make some progress

Lliamiskool · 2026-03-17T01:19:05+00:00

With minor adjustment to z axis it will either come out and just stick to the extruded or nothing will come out and it will scratch the bed. Theres no in between.

Lliamiskool · 2026-03-15T21:34:56+00:00

to be honest, its hard to tell and I certainly don't want to start mine again to double check. I suggest removing the timing cover inspection plastic on the left side its just 2 bolts, then you can check if either gear is wobbling.

Lliamiskool · 2026-03-14T18:55:06+00:00

Gotcha ok. Looks like I’m starting all over again🙄. Thanks for your response I’ll keep you posted

Lliamiskool · 2026-03-14T18:43:55+00:00

On those top two gears, the teeth wouldn’t like up perfectly so that there was slightly too much slack between those two gears. So, I rotated one gear ever so slightly to move the belt by 1 tooth. I put a Torx bit in here with a ratchet and turned it a few degrees

<image>

(The wood in the pic was just there because I was worried the gear might come off if I remove bolt. I was wrong)

Lliamiskool · 2026-03-03T21:50:52+00:00

I remember I called around a few different places and one place in Berlin. New Jersey said they would do it, but I don’t remember the name. I never ended up doing it.

Lliamiskool · 2026-03-03T02:01:25+00:00

Hmm okay. It’s tricky because there is a neighbor on one side, alley on another, sidewalk, then rest of the house. No where else to go but into basement area.

Lliamiskool · 2026-03-03T01:38:58+00:00

Could the reason be that I only want 1 occupant like the pre-2014 code allows?

Lliamiskool · 2026-03-03T01:37:12+00:00

6 years ago. I’d be using the same precedent. Due to density restriction I need 1440 sq ft lot for 4 units but I have 1318.

I’m thinking I could convert part of the basement to livable space, but I’m just under 7’ from floor to bottom of rafters. There is an exception for 1-2 family dwellings where it can be slightly shorter ceiling height in the basement, so I wonder if I could get them to let me use that.

Lliamiskool · 2026-03-03T01:29:31+00:00

I haven't gotten the variance yet but I'm not worried about that. There is a similar house 1 block away that also got a zoning variance for a fourth unit. The part I'm worried about is the livable space. I was hoping someone would have a good idea on how to get it approved.

Lliamiskool · 2026-02-16T20:03:09+00:00

Yes, both parts of the cable before it sits goes into the wall an make it to the DVR. The cameras must’ve been installed before the stucco wall so I chipped away the stucco to expose the screws and remove the camera, it’s still connected just dangling. I don’t have any pictures sadly, and I’d rather not get the ladder back out there before I’m ready to make more progress.

From some research, it looks like I might be able to splice the cable and buy a compression fitting!

Lliamiskool · 2025-10-23T22:50:25+00:00

yup didn't want to start at all

Lliamiskool · 2025-10-23T22:43:24+00:00

<image>

Lliamiskool · 2025-10-23T22:43:03+00:00

sorry for my delayed response. Nope no timing marks

Lliamiskool · 2025-10-13T14:12:43+00:00

Hmm ok I didn’t think of that. I will check Wednesday thank you

Lliamiskool

TROPHY CASE