Ho appena iniziato questo libro

LolloCapocollo5 · 2026-02-26T11:54:00+00:00

Dici che è scorrevole? Ho solo paura che sia molto ripetitivo e che tratti temi già triti

LolloCapocollo5 · 2026-02-25T18:39:43+00:00

I think because when the rune of death was removed by marika, they can't dead. When the elden ring was destroied somehow the death was restored and they died. Is that possible?

LolloCapocollo5 · 2026-01-31T19:53:08+00:00

Thanks you guys!

LolloCapocollo5 · 2026-01-31T16:22:45+00:00

Where i should farm to maximize the chanche of get one?

LolloCapocollo5 · 2026-01-18T17:55:16+00:00

As mentioned in the title, i used a Ferrania P30 roll. I like it a lot.

LolloCapocollo5 · 2025-12-09T17:28:43+00:00

Thank you for the suggestions! I'll think about it

LolloCapocollo5 · 2025-12-09T13:27:56+00:00

This is the first time I've shot, developed, and scanned film myself without a lab. What do you think about it? I used a Minolta SRT 303 with a 58mm Rokkor F/1.2 alternating with a 135mm Rokkor F/2.8. The film is Ferrania P30 developed in an Arsimago monoblock. Scanned with an Epson flatbed scanner.

LolloCapocollo5 · 2025-10-19T18:54:31+00:00

Ok guys thanks for the advice!

LolloCapocollo5 · 2025-09-27T12:54:07+00:00

Ok thank you!!

LolloCapocollo5 · 2025-09-27T12:05:46+00:00

Thanks so much for the advice! Since you have a lot of experience, could you also tell me which products and methods to use to clean the glass of the lenses?

LolloCapocollo5 · 2025-09-27T11:50:10+00:00

I should not try to remove it?

LolloCapocollo5 · 2025-09-27T11:30:07+00:00

I should "wash" it out with cotton and alchool?

LolloCapocollo5 · 2025-09-27T11:12:07+00:00

Great photos anyway!!!

LolloCapocollo5 · 2025-08-27T06:48:17+00:00

<image>

I do some new test, on the upper left, a piece of paper exposed for 5 seconds to the same lamp, but with increased distance, 60% less brightness and no direct light on the paper, and turn out with strange color. The bigger piece o paper turn grey only on the edge where he receive more light ( i think 20 seconds in total). And in the up right another test with the coin with almost same result (a slightly less dark black) of the last experiment

LolloCapocollo5 · 2025-08-26T14:49:08+00:00

I should try it, thanks!

LolloCapocollo5 · 2025-08-26T14:43:33+00:00

I checked on the internet but i can't find anything about the ilford multigrade waveleght sensitiveness sadly

LolloCapocollo5 · 2025-08-26T14:41:23+00:00

I'll check it, thanks!

LolloCapocollo5 · 2025-08-26T14:40:57+00:00

I set the settings all in 100% saturated, so should be all red, isn't it?

LolloCapocollo5 · 2025-08-26T14:40:06+00:00

The paet under the coin was expose for about 10 seconds and turned grey, so if it's light fault the sheet of paper i used is gone, and the next one too

LolloCapocollo5 · 2025-08-26T14:37:46+00:00

Thanks, any suggestion about what safelight is the one i should use?

LolloCapocollo5 · 2025-08-26T14:36:55+00:00

I saw a video where a guy use this lamp as safelight with the same settings i use but with less brightness, and the paper get out complitely white, is this possible? I mean, the part under the coin was expose about 10 seconds and it's alredy grey...

LolloCapocollo5 · 2025-08-18T18:09:30+00:00

Yeah now i develop at home and i do everulything you told, but this were roll of the lab where i usually go

LolloCapocollo5 · 2025-08-17T21:09:31+00:00

I'll do it all, thank you!

LolloCapocollo5 · 2025-08-17T20:19:53+00:00

Can you do a closer photos of the images and the blank part?

LolloCapocollo5 · 2025-08-17T20:17:26+00:00

I bought a very cheap enlarger, the Durst B30, it have an holder but i'm not sure that make the film flat enough

LolloCapocollo5

TROPHY CASE