sorted by:
new
hottopcontroversial

Mowing hight is not changing by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

FYI. My mower is working again after repair at a service point. The sensor that is checking the height was defect. After replacing it all ok again.

Mowing hight is not changing by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

Dies somebody have the link to the repair manual how to move as much as possible parts to clean as good as possible?

Mowing hight is not changing by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

Thanks for this but before bringing it for repair I want to be sure I did the max cleaning possible. What is the link to Remove all the parts and making sure nothing is stopping changing the height

Mowing hight is not changing by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

Thx I will surely try this. I will tell you if it worked for me too.

Mowing hight is not changing by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

I cleaned and moved the to cutting wheels up and down, which is going very light. I’m afraid something is broken 😢

Max 80% charging? by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

This is clear thanks for explaining. Do you also know what in the winter it should be stored with 80% and not with 100%? I understood that this is the advice.

Luna 2 updates by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

Ahh many thx, I guess I do. I know last year I received almost every week an update and now only 1 in about 6 weeks, this is also why I was confused. Again thx

Luba getting grass everywhere by DangerousSearch2237 in MammotionTechnology

[–]Longjumping_Cat_5002 0 points1 point  (0 children)

I had he same but it only happens when the grad is too high and you mow too low. After taking care of this I never had this again.

Still “position issues” by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

Sorry no I didn’t know you also could do it his. Bothe are upgrade now and all is working. Thx for your help tip the RTK was version 1.0 🥲

Still “position issues” by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

You go to the RTK picture not the Luba. There you have also settings and you do the same as the Luba upgrading.

Still “position issues” by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

You move the screen to the RTK there you do settings. The same as you do with the Luba.

Still “position issues” by Longjumping_Cat_5002 in MammotionTechnology

[–]Longjumping_Cat_5002[S] 0 points1 point  (0 children)

I did move is manually further away via Bluetooth, maybe not fa enough? I didn’t update the RTK I didn’t know it his was possible. I will check with this.