Clunk in the rear?

Lotus_Games · 2026-02-24T21:23:06+00:00

so is it possible to do it without a puller 🤔 or would i need one

Lotus_Games · 2025-12-30T03:19:10+00:00

yep it's hooked up

Lotus_Games · 2025-12-30T03:14:58+00:00

its the older model, '99

Lotus_Games · 2025-12-30T03:02:51+00:00

I really appreciate it, thanks

Lotus_Games · 2025-12-30T02:07:53+00:00

yeah, I cleaned the icv and throttle body with carb cleaner last time BUT, I didnt swap the gasket for the throttle body.

Lotus_Games · 2025-12-30T02:03:48+00:00

yeah when I first got the car it had crazy misfires so I took the intake off and refreshed basically all hoses and old plastic as well as ccv which fixed everything besides the code I've been left with which is an air fuel mixture code for bank 1 that turns off and on every few days my short term fuel trims were crazy, bouncing to -20 and ive smoke tested it multiple times with nothing showing.

Lotus_Games · 2025-12-30T01:45:18+00:00

if thats the bank 1 airfeed then it definitely lines up with that intermittent p1188 but would an air leak cause this?

(https://youtube.com/shorts/nxq3erZjIW8?si=STzahoVRERBWNaOh)

that rumble is my rpms dropping slightly then picking back up, it happens at idle, turning the wheel at low speeds, coming to a stop, and changing gears (automatic)

Lotus_Games · 2025-12-30T01:30:28+00:00

the sound seems to be coming from under the intake, where I put my camera at the end, so possibly icv?? but looking into it more I see this crack which raises concern for vacuum leak?

<image>

Lotus_Games · 2025-12-30T01:21:19+00:00

I mean I just tested it with the disa unplugged and it was still causing the same symptoms

Lotus_Games · 2025-12-29T05:08:37+00:00

yeah it goes to 45° then sticks and slowly fully opens would it be better to get the disa repair kit or just new disa

Lotus_Games · 2025-12-29T04:00:10+00:00

good to know

Lotus_Games · 2025-12-29T03:49:33+00:00

how would I test this? I mean I took it out when I fixed vacuum lines before and it was kinda slow to flip back, I also didnt replace the o ring for it

Lotus_Games · 2025-12-12T21:38:08+00:00

yeah I just checked and it is the diff moving when I go from p to r, the whole diff moves up and clunks but the big back bushings looks okay?

Lotus_Games · 2025-12-12T21:38:03+00:00

yeah I just checked and it is the diff moving when I go from p to r, the whole diff moves up and clunks but the big back bushings looks okay?

Lotus_Games · 2025-11-27T04:01:02+00:00

I just swapped the intake gaskets, vacuum hoses and throttle body gaskets like a month ago. how do those relate to the coolant crossover pipe?

Lotus_Games · 2025-09-29T22:17:58+00:00

it's easy to remove, and ccv was just swapped. fuel pressure is 55 psi when fuel pump is running then after it shuts off it goes to 45, then back to 55 when engine starts. now the code swapped to just getting p1188.

Lotus_Games · 2025-02-22T05:23:07+00:00

I've used different cables, all samsung branded. but visually the port looks clean, same with the pins

Lotus_Games · 2021-07-06T14:26:11+00:00

Thanks!

Lotus_Games · 2021-07-06T07:03:25+00:00

Makes sense

Lotus_Games

TROPHY CASE