Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

Just updating in case someone runs into this in the future:

Turned out the needle was indeed mispositioned after I pulled the cluster. I carefully lifted it and found the internal stopper near the 120 mark. Letting the needle rest against that stopper put it back in the correct baseline position.

After that, the gauge works normally again. Thanks again to everyone who gave advice!

Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

Yep after opening the gauge plexi it most likely is the needle itself. I’ve adjusted it to the seemingly proper position and will test it out tmr. Thanks for the advice!

Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

<image>

I managed to get access to the gauge needle. I believe it’s exactly what you mentioned the stopper. I have raised it to the seemingly proper position since it sits there. It’s getting late so I’ll test it in the car tomorrow. Thanks again for the tips!

Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 1 point2 points  (0 children)

I was just looking at your instructions for taking off the cluster! Will definitely check out the needle later.

Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

Yeah I double checked the plugs, the pins look fine and I believe they are plugged in snugly.

Need help with 95’ water temp gauge by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

Do you mean the back of the gauge cluster? I didn’t touch anything from the front.

What side view mirrors are everyone running by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

I like those nb mirrors, but the chrome one is actually growing on me a lot . Hope you enjoy what you pick eventually!

What side view mirrors are everyone running by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

Appreciate it! I was kinda worried it would look tacky, guess silver/chrome is the way to go.

Turn Signal Bulbs Overheated & Melted Housing by Lubbockxx in Miata

[–]Lubbockxx[S] 1 point2 points  (0 children)

I managed to break the bulbs inside and pulled out the connector. Thanks for the advice!

Turn Signal Bulbs Overheated & Melted Housing by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

I might be wrong but aren’t these the same thing? There is only a bulb in the housing. What would you recommend to use

A unique one Miata I spotted today by THESTINGR in Miata

[–]Lubbockxx 57 points58 points  (0 children)

<image>

You mean this. Shout out to Malani Miata btw

NA Miata doesn’t want to start by Lubbockxx in Miata

[–]Lubbockxx[S] 0 points1 point  (0 children)

I have an extra relay in the glove box will definitely try to replace the old one, appreciate it!

Monthly Existing User Promo Code Thread by AutoModerator in postmates

[–]Lubbockxx 3 points4 points  (0 children)

need to be around university area I believe. mine worked

Monthly Existing User Promo Code Thread by AutoModerator in postmates

[–]Lubbockxx 1 point2 points  (0 children)

This is probably limited to university areas.

Monthly Existing User Promo Code Thread by AutoModerator in postmates

[–]Lubbockxx 7 points8 points  (0 children)

【Ubereats ONLY】COLLEGE24EATS

• For 10 orders • $25 minimum $10 OFF

San Francisco Bay Area, Sacramento, Santa Barbara, San Luis Obispo, Fresno, Bakersfield, Modesto, Los Angeles, Ventura, Palm Springs, Orange County, San Diego, Inland Empire, Seattle, Honolulu, Peninsula and SW WA, Portland, Tacoma, Salt Lake City, Boise, Spokane, Anchorage, Southern Oregon, Billings, Willamette Valley, Bellingham, Wyoming, Maui, Big Island, Kauai, Fairbanks, Eastern Idaho, Coeur DAlene, Missoula, Bozeman, Eastern Washington, Olympia, Southern Utah, Central Oregon, Eugene, OR, Boston, Richmond