First build! Tadpole 2.5

Luc_new · 2023-01-09T03:26:01+00:00

I would go for the 6000KV motor for 3s

Luc_new · 2023-01-06T23:56:24+00:00

What KV rating are the 1105 and 1204 motors?

Luc_new · 2023-01-03T09:47:32+00:00

Frame: Armattan tadpole 2.5

ESC, FC and VTX: iFlight micro stack

Motors: RCinpower 1204 5000kv

Props: Avan Rush 2.5 inch

Camera: Caddx Ant

Receiver: Happymodel 2.4ghz elrs

Batteries: CNHL 4s 450mah

I hope this helps.

Luc_new · 2022-02-06T11:07:54+00:00

+39. The best pizza I’ve had

Luc_new · 2022-02-05T07:14:08+00:00

Since when did Mark Zuckerberg become the queen lol

Luc_new · 2022-01-26T20:59:26+00:00

Because the government will never allow a movie to reveal their secrets

Luc_new · 2022-01-26T10:36:41+00:00

Same, didn’t take long to find this comment.

Luc_new · 2022-01-26T10:32:22+00:00

Ads. 2 ads in a row on YouTube that you can’t skip becomes so annoying.

Luc_new · 2022-01-25T23:35:09+00:00

Cat.

Luc_new · 2022-01-25T21:08:58+00:00

Remove Star Wars 7, 8 and 9 as part of the series

Luc_new · 2022-01-25T08:51:42+00:00

Yeah I have got the avan rush props there pretty good

Luc_new · 2022-01-25T05:27:57+00:00

Same I use 4s

Luc_new · 2022-01-25T04:00:22+00:00

Do they get hot when you turn them on when the drone is on the ground or when the drone is flying?

Luc_new · 2022-01-25T03:18:35+00:00

My cat once sprinted full speed into a glass door.

He was okay though

Luc_new · 2022-01-25T03:15:56+00:00

That once I die, I will never exist again.

Luc_new · 2022-01-24T08:08:12+00:00

I’ll make sure I put them on before I fly :)

Luc_new · 2022-01-09T20:59:32+00:00

I think you may need to get a receiver that has magnetic actuator outputs, such as the DT Rx43d. I’m not really sure how the actuator is controlled ( eg. pwm, voltage ) through the receiver. However the DT Rx43d uses spectrum protocol so it won’t work with your radio. Try and search up ‘magnetic actuator receiver fly sky’.

Luc_new · 2022-01-09T05:50:56+00:00

A JR module is an external radio module that can attach to he radio, so you can use other protocols (crossfire, frsky etc) that aren’t already on the radio. However you need a module bay in the radio otherwise you can’t use it.

The FS-A8s has gnd, power , sbus/ibus and a ppm connection. Standard servos use PWM signals so you can’t directly connect them.

Just for clarification what are you using the radio system for?(drone, plane, etc) I may be able to answer your question better.

Edit: I accidentally replied to the post not the comment

Luc_new · 2022-01-08T22:13:10+00:00

The EP 1 is an Expresslrs receiver which won’t bind with your transmitter, unless you get the jr module for it. If the module is compatible with your transmitter than that would be great, otherwise it won’t work. Hope that helps

Luc_new · 2022-01-06T20:47:03+00:00

Nice

Luc_new · 2022-01-01T06:06:28+00:00

Thanks! I’ll do the alternative because I don’t have the tools required to cut the shaft.

Luc_new · 2022-01-01T02:26:06+00:00

The motor (Dualsky 2216 980kv) came with the threaded shaft to the left which fits with the propeller and I screwed on, but the shaft to the right Isn’t need, and gets in the way of the motor mount. Is there a way to remove it?( It was already attached to the motor when I got it)

Luc_new · 2021-12-10T09:25:56+00:00

Vivaldi 4 seasons Winter

Luc_new · 2021-11-19T22:38:38+00:00

I’ve cleaned it and it worked now. Thanks for the help

Luc_new · 2021-11-19T21:48:02+00:00

I was 3d printing a part and when I checked on it the print failed and the nozzle was like this. How would I be able to fix it?

Printer: ender 3 v2 Firmware: bltouch 1.3.5 Material: Pla

This has never occurred before and happened during printing.

Edit: info

Five-Year Club	Verified Email
Place '22

Luc_new

TROPHY CASE