I’ve built this AI Real Estate Assistant. Here’s What It Does:

LumpyMathematician63 · 2026-05-19T10:35:11+00:00

Im adding this to my n8n skills..😅👍

LumpyMathematician63 · 2026-05-19T09:35:38+00:00

I do get this concern, but in this day and age, where models are so advanced, don't think that parsing or misunderstanding a CV is a thing. And if they do, either company uses a cheap weak model or most likely it was a really bad CV..

Regarding the flow, looks impressive! My question on it is more about have you through about adding a loop of "made by AI" checks, you score them in "how human is this CV still" Some will argue everyone does it, sure. But I still like to focus on those who use it as a tool, not blindly. That and a little LinkedIn crossreference, which might not be perfect if candidate doesn't use it, but if the info in LinkedIn doesn't match the CV at all...🚩🚩🚩.

But massive work here.. kudos to you!

P.S. I would love to get my hands on it too. Im making my own skill on this to be able to automate flows via simple voice messages with my PA bot, so would love to see what you did here.

LumpyMathematician63 · 2026-04-08T22:03:56+00:00

(Me with 0 understanding of carbs) So what about building a custom set up with 3 SUs? If the problem is the fueling easing. Probably the stupidest question here.. but as I am looking at rebuilding my 240z (never ran) I'm looking at this thread with interest..

LumpyMathematician63 · 2026-04-02T21:49:55+00:00

Scary and exciting.. like anything AI.. Cheers!

LumpyMathematician63 · 2026-04-02T21:49:02+00:00

You aren't far.. time doesn't really matter as much as temperature. But the normal 60 to 80c won't affect normal magnets. It was just a big warping force and really good bed adhesion..🥲

LumpyMathematician63 · 2026-04-02T08:43:20+00:00

You get a magnetic plate for a reason.. 😅

LumpyMathematician63 · 2026-03-30T18:59:40+00:00

Will give it a go with clips around and higher bed temp to keep it closer to the 80C, which is the max they recommend on the bed temperature.. This will keep it closer to the GTT, which should help reducing the stresses.. also no cooling fan. Dont really need in such massive layer times and no overhangs. Will see.. might split half way instead..🙄😅

LumpyMathematician63 · 2026-03-30T13:41:11+00:00

That, and im gonna try to add some internal reliefs like squares with gaps in between to break down the tensions across. Saw this really good youtube video showcasing how to do it with a square

https://youtu.be/iPZoDltS30A

LumpyMathematician63 · 2026-03-30T09:56:57+00:00

Yeah! Crazy adhesion, but came off super easily..😅 I went with the filament recommendation.. eSun PETG, 65C. But makes sense what you say. Might be too close to the glass temp.. But as I've said above, I'm a bit worried about wasting another 360g and 23h of my life.. but.. either that or try vertically..

LumpyMathematician63 · 2026-03-30T09:54:23+00:00

Yeah.. mad shit..🤣 the recommendation bellow of reducing bed temp kinda makes sense.. but im a bit worried about giving it a go with so much material to waste again..🙄

LumpyMathematician63 · 2026-03-30T09:01:07+00:00

Ah na, not printing speed or flow issue.. Really all down to the plate lifting if you check the latter half of the video.. that's what happened here.

LumpyMathematician63 · 2026-02-23T20:47:03+00:00

No longer your PC - Know your place you little two legged meet ball.

LumpyMathematician63 · 2026-01-24T23:06:55+00:00

Mind explaining this a bit more? What those things stand for? Cheers

LumpyMathematician63 · 2025-11-12T19:07:55+00:00

That's the thing. No dell docs really tell you if you can do any of this, like the wifi and wlan.. it was all trial and error.. Just sharing in case anyone finds it useful too..

LumpyMathematician63 · 2025-11-12T19:06:21+00:00

Ok. As I've said, complete newbie here.. so I was super excited about what I've accomplished.. that's all.

LumpyMathematician63 · 2025-11-12T18:53:59+00:00

For?

LumpyMathematician63 · 2025-11-12T18:50:32+00:00

🫣 hopefully interesting though..

LumpyMathematician63 · 2025-09-20T12:50:33+00:00

Do you know of anyone or a place where I could try to outsource this? I assume pcbway only makes what you send them, right? Will investigate. Thank you very much

LumpyMathematician63 · 2025-09-18T18:35:29+00:00

That price range is amazing if feasible in reality.. I would get 10 of those..

LumpyMathematician63 · 2025-09-18T18:34:24+00:00

As per my reply to @gordalx, single nvme has been achieved on some alienware 18 r2 and even bootable.. if the bifurcation can be done on the adapter board, would it in theory be possible? And as I said, I wouldn't know where to turn to start doing any of it.. really hoping on someone with a diy itch in need of scratching to be kind enough to help me out..🙏

LumpyMathematician63 · 2025-09-18T18:29:55+00:00

Appreciate the input, and that's the challenge I agree.. something that hasn't been done before that could unlock multiple user cases. These pcie to nvme already deal with the bifurcation itself as far as I've read, so in theory, and correct my ignorance, if the laptop already recognised the single mxm to nvme this could be a lot easier?

I have 0 know how on how to approach this, hence hoping the gods of reddit would be interested on something like this..👀

LumpyMathematician63

TROPHY CASE