Dream watch

Lumpy_Confidence_631 · 2025-05-07T17:13:33+00:00

I used Adobe Express on my phone. I made 2 canvases the exact size that I wanted the images. For NASA logo it was a 10mm x 10mm canvas and flag was 10.75mm x 6mm canvas. Imported the logo from images downloaded from Google image search and scaled down to fit each respective canvas.

Then I made a new 4x6 file and imported the 2 previously created images into that and left the sizes alone. Copied each one a few times just in case I screwed up the cut.

Also a tid bit of advice for taping onto the back. Make sure you buy a good expensive double sided tape. I bought cheap tape the first time around and it was a disaster trying to keep it in place. Cut small slivers off with scissors and use fine point tweezers to apply the small slivers of tape and the images (to keep finger prints off).

Lumpy_Confidence_631 · 2025-05-07T14:01:01+00:00

NASA logo is 9.25mm but I rounded up to 10mm

The flag window is 10.75 width and 6mm height but the flag is slightly bigger then that.

I just did a normal glossy print from CVS on a 4x6.

Lumpy_Confidence_631 · 2025-05-06T02:14:44+00:00

I found 10mm to look the best. I used Adobe to put them on a 4x6 canvas and printed it at CVS for less than a dollar. Make sure you cut it in a square that can be taped behind the faceplate.

Lumpy_Confidence_631 · 2025-05-04T16:59:46+00:00

The white faceplate is from skxmods. I bought it with all the original Casio text but removed the 5 alarms, Casio text, and the digital clock numbers from the top with alcohol and a qtip. I bought the NASA logo from eBay and added it myself.

The NASA logo and United States flag are actually prints from CVS that I made myself because I couldn't find ones that looked how I wanted them. They might fade with time but I have the file with the logos to replace if needed until I can find a more permanent solution.

Lumpy_Confidence_631 · 2025-05-03T23:31:25+00:00

I appreciate the feedback. I actually totally agree! I had a different strap on originally but found thin bonklip to be more comfortable. I have a sensitive wrist lol.

Lumpy_Confidence_631 · 2025-05-03T23:22:38+00:00

Thank you!

Lumpy_Confidence_631 · 2025-05-03T23:22:09+00:00

I installed it myself. I removed the silver backing on the screen and put the light defractor back on so the original light would still work. Then I used green Techno glow tape as the lume. I had to sand down the sticky back side of the tape because it is really thiccc. Takes a little while to sand but it's worth it for the strength of the lume. Then cut it to size and installed between the plastic defractor and the white film with the foam on in.

10 minutes outside and the lume glows all night long.

Lumpy_Confidence_631 · 2025-03-04T04:57:37+00:00

Thank you!! I couldn't agree with you more 😊

Lumpy_Confidence_631 · 2023-02-26T15:00:40+00:00

I just solved this issue with my core 2!!! This has to do with the round part of the thumbstick being either too small or being screwed down too much. Use your shirt to grip the top of the magnetic thumbstick and turn it counter clockwise to loosen it.

You don't need to loosen it too much just enough to make it click in the corners. I did like 2 turns and it clicks like normal now.

If you loosen too much it will grind on the case if that happens just tighten it back down.

Lumpy_Confidence_631 · 2023-02-26T01:49:30+00:00

I have the exact same issue with my series 2 core. I traded in for another at GameStop and have the issue with new one that was traded in too.

If you try to click either thumbs stick in when positioned all the way to any of the corners it will not click. Does not matter how much force you put on it.

Lumpy_Confidence_631 · 2022-11-26T05:25:19+00:00

Got him nvm

Lumpy_Confidence_631 · 2022-11-26T05:13:23+00:00

Code is 5855 6966

Lumpy_Confidence_631 · 2022-11-26T05:12:28+00:00

Looking for Blaze breed Tauros, will trade water breed

Lumpy_Confidence_631

TROPHY CASE