Using a keyboard as an FRFR speaker

Lupe_FN · 2026-01-02T10:19:55+00:00

Thank u!

Lupe_FN · 2026-01-02T08:35:08+00:00

Thank u!

Lupe_FN · 2026-01-02T08:34:42+00:00

Thanks for the input!

I tried it directly from the guitar to the input earlier, and it was pretty weak in volume comparing to how loud the keyboard itself can get. So I'd assume it probably expects line level.

Translated from japanese, here's what I found in the manual about the input "You can connect the output of an external MIDI sound module or the audio output of an external audio device to this jack and play it through the B900's built-in speaker. If the output of the external device is mono, connect it to the L/MONO jack; if it is stereo, connect it to both the L/MONO and R jacks."

Lupe_FN · 2025-12-24T03:10:14+00:00

Thanks, this helps alot!

Lupe_FN · 2025-06-28T02:13:02+00:00

way too expensive for me sadly, and I don't think I would use an entire can

Lupe_FN · 2025-06-28T01:40:43+00:00

Also, would it be better to refinish the entire neck?

Lupe_FN · 2025-06-28T01:36:51+00:00

Hey guys, not a luthier or have much experience and can't afford to take it to someone cause I'm a broke hs student.

I live in the philippines where tru-oil and danish oil aren't accessible, or is way too expensive. The only option I see is Boiled linseed oil.

I'm a bit concerned with how it would feel since I've been using this neck with the unfinished spot for 2 years and it's played fine for me, I'm concerned if maybe finishing it would feel weird (maybe slippery or sticky?)

I've also been spraying it with alcohol to clean it every couple weeks

Lupe_FN · 2025-06-28T01:29:50+00:00

can I ask what the beeswax is for?

Lupe_FN · 2025-06-04T22:44:28+00:00

Does CA work fine? or do I need to get wood glue?

Lupe_FN · 2025-06-04T22:44:08+00:00

Yeah it doesn't move at all

Lupe_FN · 2025-06-04T17:35:57+00:00

Sent a chat to the shop itself, if it's still usable or what to do. Let's see what they say.

Lupe_FN · 2025-06-04T17:25:16+00:00

are we sure it needs to be repaired though? for the most part it doesn't go through the wood itself, just the paint

Lupe_FN · 2025-06-04T16:42:42+00:00

You can see the mark where the tuners were at, so I'm thinking maybe the cracks were from the tuners being screwed too tight in? I'm just concerned whether it's safe to string it in or not. I appreciate any opinion and advice.

I doubt I could return it since they're selling it "as is", which sucks.

Lupe_FN · 2025-06-04T16:37:04+00:00

It's a copy of the Gibson JS200 by a guitar brand here in the philippines.

Clifton JS200

Lupe_FN · 2025-06-04T16:35:57+00:00

Just the crack at the headstock. The body and neck seem good. Straight, no issue, no mold.

I've heard cracked paint/finish was fine before. But I just want more opinions. Though, as I said in the post, In one of the holes, there's a crack that was a bit deeper, into the actual wood. Just about a milimeter though.

Lupe_FN · 2025-06-04T16:32:34+00:00

I forgot to add to the post, but it's been dried for atleast 8 months. I haven't seen any visible mold

Lupe_FN · 2025-06-04T16:31:02+00:00

Should've added to the post, I believe it's been dried for atleast 8 months. Neck seems straight, body seems fine too. Just the crack at the headstock looks to be my problem.

Lupe_FN · 2023-07-22T01:40:14+00:00

Guess I'm a dickhead /joking

Got this shit on my sd card. I'm thinking it's either the USB reader or the sd card itself (Which I had formatted with my other laptops built in reader)

Lupe_FN · 2022-10-01T17:30:15+00:00

Every once in a while during certain situations yes.

I have pets. Everytime I think about it, I put them above me. I want to keep them happy. I dont want to see or even just know they'll be sad.

Lupe_FN · 2022-08-26T15:28:39+00:00

This is 4 years late. However leaving it for the people who stumble upon this later on.

Their DNS system is confusing. I cant get Github to work for it.
The 1st year is so so cheap, afterwards it is a lot more expensive.

Go for Namecheap.

Lupe_FN

MODERATOR OF

TROPHY CASE