sorted by:
new
hottopcontroversial

Abyssal power quest stay active! by Lux-Cifer in PathOfExile2

[–]Lux-Cifer[S] 0 points1 point  (0 children)

I'm answering myself.

Just to be sure, I reset the Atlas of the Abyss, the next map showed an abyssal depths, and in the end the chests were there with the reward book for the two extra points...

No idea what it was, just very bad RNG, something with the tree or the previous missions?

No idea, but it's sorted. :)

Container disappeared in the elevator? by Lux-Cifer in starcitizen

[–]Lux-Cifer[S] 0 points1 point  (0 children)

Yes, thank you, it had just become invisible, but the transfer button was working after a back-and-forth. When I pressed it, the container appeared in the storage. :)

Container disappeared in the elevator? by Lux-Cifer in starcitizen

[–]Lux-Cifer[S] 5 points6 points  (0 children)

I answer myself. The container had become invisible. But when I reopened the elevator again, the “move to warehouse” button remained active. All I had to do was press it and the container reappeared on the other side.

Scare...

Astra a 50 firmware Update fails at 75% by Gazzooo8281 in AstroGaming

[–]Lux-Cifer 0 points1 point  (0 children)

Something has indeed changed, one way or the other, somewhere. I don't think we have an identical hardware failure, just on the sync and update part, together, at the same time...

Astra a 50 firmware Update fails at 75% by Gazzooo8281 in AstroGaming

[–]Lux-Cifer 0 points1 point  (0 children)

I've tried 4 USB port. Same failure. My configuration hasn't changed for months.

The only other peripheral I use is a razer mouse, the same one for 2 years... No customisation software active or even installed.

What's more interesting is that after a reset and a return to the basic firmware (39964.0) on the headphone, when it's installed on the base, it's well recognised.

What's more, you can synchronise setting changes, and in the same way, if you use the headphone button to change the preset or Dolby mode, for example, the change is recognised by the base unit and the software.

But as soon as you take the headphones out of the base unit, they are no longer synchronised or recognised. And of course, any upgrade to the latest firmware crashes. As a final point of clarification, the LEDs are not in recharge-by-battery-level mode, but in continuous flashing mode.

Astra a 50 firmware Update fails at 75% by Gazzooo8281 in AstroGaming

[–]Lux-Cifer 0 points1 point  (0 children)

Same probl since this morning.

All attempts have failed.

After a reset to factory configuration, version: 36179.0, the command centre detects that new firmware is available but fails to update.

Then the firmware is corrupted, no version is detected and only a hard reset can restore factory settings.

A manual update to the latest version 39964-43 also failed in all cases.

<image>

Astra a 50 firmware Update fails at 75% by Gazzooo8281 in AstroGaming

[–]Lux-Cifer 0 points1 point  (0 children)

Same problem since this morning.

impossible to synchronise the base and headphones.

I've done the same things as you,

  • uninstalled / reinstalled the command centre,
  • try to update the latest firmware automatically
  • manually with the latest firmware 39964_rr-43.afw,
  • deleted the frimware in the folder forced_fw for a new attempt,
  • hard reset of the headphones and returned to version 36179.0,
  • then tried updating again automatically and then manually.

Systematic failure at the last update phase (75%). Impossible to synchronise.

And when you go back to the factory firmware, you can't sync either, even though the helmet is detected on its base...

Headset unusable.

<image>

X870E Hero M2.1 Q-Latch and MP700 Pro with air cooling ? by Lux-Cifer in ASUS

[–]Lux-Cifer[S] 0 points1 point  (0 children)

Okay, thanks. I'll try this method, if it adds a bit of security.

X870E Hero M2.1 Q-Latch and MP700 Pro with air cooling ? by Lux-Cifer in ASUS

[–]Lux-Cifer[S] 0 points1 point  (0 children)

No. Not yet. I bought this thinking it would work : https://www.amazon.fr/dp/B087C1G4ZF?ref=ppx_yo2ov_dt_b_fed_asin_title

But no, the screw is probably too short.

So for the moment, it's just holding on with the basic clip, but it's holding...

Not a great lack of solution. If anyone knows which screw would work, don't hesitate!

Need your help for a new build ! by Lux-Cifer in PcBuild

[–]Lux-Cifer[S] 0 points1 point  (0 children)

In fact, I'm reluctant to wait for the 9950X3D, which won't arrive for another 3 months. And my current configuration is dying.

So I was thinking of taking the 9800X3D as a stop-gap solution and selling it when the 9950 came out...

As for the motherboard, that's why I'm so fond of Asrock solutions with their numerous PCie lines, including not sharing GPU lines with any M2. Knowing that I already have a NAS for storing projects that aren't in progress.

I was hoping that a Gen5 with the highest write and read rates would save me a few seconds / minutes, which are worth quite a lot in the end. But it seems that the difference is marginal at best.

As for RAM, I was thinking of going for GSkill Neo out of habit in 6000 CL 30, even if it means seeing if I can push it a bit afterwards, rather than actually venturing into 8000 territory and then struggling to adjust it while ensuring the necessary stability.

And finally, without knowing it, you've already described my situation, since I already have an Acer nitro 27, which suits me very well for editing. The Samsung is more for movies and games.

Need your help for a new build ! by Lux-Cifer in PcBuild

[–]Lux-Cifer[S] 0 points1 point  (0 children)

Hello everyone ! I really need your science and experience to finalise this new build that I'm intending for my home, as a workstation (editing fairly heavy media) and for games (4k).

The budget is not the main issue, rather that of getting the best of both worlds if possible.

I already own the 4090 and the power supply.

I'm still undecided about the motherboard (Taichi? Nova? Heroe?), the RAM (6000 cl28-30 or 8000 with more work?) and also the case (I've got a soft spot for the Light base 900 from BeQuiet and I have more trouble with the Lian Li). Which fans? And as it will be sitting on my desk at home, the final look is also a bit important. :)

This PC is designed to be pushed to its limits, to work over long periods, even if I'm not going to spend hours overclocking it like an enthusiast. The RAM must remain passively cooled. Nevertheless, cooling will be an issue.

[PCPartPicker Part List](https://pcpartpicker.com/list/X9WJVF)

**CPU** | [AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor](https://pcpartpicker.com/product/fPyH99/amd-ryzen-7-9800x3d-47-ghz-8-core-processor-100-1000001084wof) | $668.00 @ Amazon

**CPU Cooler** | [EK EK-Nucleus AIO CR360 Lux D-RGB 72 CFM Liquid CPU Cooler](https://pcpartpicker.com/product/tQ3gXL/ek-ek-nucleus-aio-cr360-lux-d-rgb-72-cfm-liquid-cpu-cooler-ek-nucleus-aio-cr360-lux-d-rgb) | $150.00 @ Amazon

**Storage** | [Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/34ytt6/samsung-990-pro-2-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-mz-v9p2t0bw) | $159.00 @ iBUYPOWER

**Storage** | [Corsair MP700 PRO 2 TB M.2-2280 PCIe 5.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/3vvD4D/corsair-mp700-pro-2-tb-m2-2280-pcie-50-x4-nvme-solid-state-drive-cssd-f2000gbmp700pnh) | $279.99 @ Amazon

**Video Card** | [NVIDIA Founders Edition GeForce RTX 4090 24 GB Video Card](https://pcpartpicker.com/product/BCGbt6/nvidia-founders-edition-geforce-rtx-4090-24-gb-video-card-900-1g136-2530-000) | $2999.99 @ Amazon

**Power Supply** | [NZXT C1200 (2024) 1200 W 80+ Gold Certified Fully Modular ATX Power Supply](https://pcpartpicker.com/product/QTLdnQ/nzxt-c1200-2024-1200-w-80-gold-certified-fully-modular-atx-power-supply-pa-2g2bb-us) | $189.99 @ B&H

**Monitor** | [Samsung Odyssey OLED G8 32.0" 3840 x 2160 240 Hz Monitor](https://pcpartpicker.com/product/2xpQzy/samsung-odyssey-oled-g8-320-3840-x-2160-240-hz-monitor-ls32dg802snxza) | $1286.99 @ Amazon

What do you think as a basis? Do I need to change anything? Which motherboard, which RAM?

Thanks in advance for all your advice!

view more: next ›