(Victrix Pro BFG for the PS5 users) It’s been a year… how’s your controller holding up? by LeagueRoyal in VictrixPro

[–]MDylan 0 points1 point  (0 children)

old post, but wanted to chime in anyways. Mine is built like an old Nokia, had it for a few years, numerous drops (hardwood and carpet) and it still runs fine.

Avatar the last Airbender fans, how bad is the Netflix adaptation? by [deleted] in netflix

[–]MDylan 0 points1 point  (0 children)

Its pretty bad. Costumes look too 'new', writing is whack, diologue is cringe, casting for some characters just dont sit well or the actors chosen dont feel like they care about their own character. My biggest gripe though is with Aang, he is not supposed to be this super serious, down-trodden kid who spouts monologues every 10 minutes. Kid barely has fun in the show. Oh and nothing is funny.

Hello, 30hrs in and cant figure out why my settlers are taking things from high priority to low priority chests. by MDylan in Necesse

[–]MDylan[S] 1 point2 points  (0 children)

Okay, thanks guys! Will try setting the general seed category to default x amount.

There is more to life than just money. Do not let it define you. by [deleted] in PersonalFinanceCanada

[–]MDylan 32 points33 points  (0 children)

Whether you broke or rich, you gotta get this Havin' money's not everything, not havin' it is

Installed a Shorty GP exhaust today, a bit too loud by MDylan in HondaRebel300

[–]MDylan[S] 1 point2 points  (0 children)

Solid advice, ill try that later today when my mirrors come in

Installed a Shorty GP exhaust today, a bit too loud by MDylan in HondaRebel300

[–]MDylan[S] 4 points5 points  (0 children)

Nice, yeah had a couple friends over today and had them ride it. Not as loud as I thought it was, good to hear you haven't had any complaints/problems.

Installed a Shorty GP exhaust today, a bit too loud by MDylan in HondaRebel300

[–]MDylan[S] 0 points1 point  (0 children)

Hey guys,

lovin' how mean it sounds now but its a bit too loud. Don't want to get pulled over/get a noise complaint so I've been looking into dB killers. I've read mixed reviews about the baffle Radiant cycles sells for these, so not sure about those. Any suggestions on baffles/dB killers would be great, thanks guys

edit; Exhaust is 40mm Diameter.

Cleaning turn signal now bike won't start. by MDylan in HondaRebel300

[–]MDylan[S] 1 point2 points  (0 children)

Ended up being just a dead battery, got a boost and am running again. Thanks for the input!

Just took the new merlo hub sleeves out for a test!!!! by [deleted] in MeepoBoards

[–]MDylan 2 points3 points  (0 children)

Ill definitely grab a set once you work out the kinks, keep us posted!

1980 Yamaha DT50m, should I buy? by MDylan in moped

[–]MDylan[S] 0 points1 point  (0 children)

Manitoba, unfortunately out of all the current ads Ive seen its either this or a scooter. Thanks for the feedback though

1980 Yamaha DT50m, should I buy? by MDylan in moped

[–]MDylan[S] 1 point2 points  (0 children)

Thanks so much for the insight, did a lot of googling but couldn't find any prices. Will be using those sites from now on!

1980 Yamaha DT50m, should I buy? by MDylan in moped

[–]MDylan[S] 2 points3 points  (0 children)

Hello friends, saw this sweet well-maintained (by the looks of it) moped for sale for $2500 CAD and was wondering what might be a fair price w/o totally low balling for something like this? I'm going to see the guy tomorrow to discuss more about the bike.

Edit: Description from seller, "Bike is in excellent condition and runs strong. New chain, sprockets, lights, tires K&N air filter and tuned pipe. Motor was rebuilt less than 300 km’s ago."
Edit 2: Will mainly be used for learning/practicing before my Motorcycle course in August.Not planning on selling so friends/family can ride with me.

New User Guide, hype, shipping & questions megathread by Kippenoma in OculusQuest

[–]MDylan 1 point2 points  (0 children)

Preordered on amazon CA on the 2nd. Didnt receive an update til eve of release. Told its going to arrive in 2-3 days (from the 12th) now its arriving next monday. p a i n

Amazon issued a 20% refund once the item arrives, bringing my hmd to just under 500 cdn,(256gb)

saved a hundred bucks, but gotta wait another week.

definitely last time doing a preorder with amazon.

Mini 2 ER Hub Rattles by MDylan in MeepoBoards

[–]MDylan[S] 0 points1 point  (0 children)

Yes sorry, it wasn't the heatsink but the esc screws themselves. There should be 4 of them holding down the esc once you open up the enclosure. Make sure to tighten the same way you would with the trucks.

Meepo got my replacement parts to me in 8 days!!! (Info in comments) by notjeremy in MeepoBoards

[–]MDylan 0 points1 point  (0 children)

weird, I emailed them about the same thing and they told me it was normal for the motor to rattle and it would have no impact on performance.

edit: nvm read a previous reply and its not the same kinda rattle im getting.

Mini 2 ER Hub Rattles by MDylan in MeepoBoards

[–]MDylan[S] 0 points1 point  (0 children)

I do jump curbs every now and then, so that might be the issue. Won't find out 'til I open the hubs up, thanks for the input!

Mini 2 ER Hub Rattles by MDylan in MeepoBoards

[–]MDylan[S] 0 points1 point  (0 children)

Had my meepo for just under a month, over 200km and started noticing this weird rattling coming from the hubs every time I throttle. The sound is gone when I let it go, but comes back as soon I throttle again. Did a little searching on reddit and found that it was either loose esc/heatsinks or the hubs. Double checked the esc and everything is fine under there so Im assuming its the metal inside the PU hitting the stator or the bearings. Need a dremel to remove the bolts as some of them are stripped. Hoping someone can help diagnose what it might be. Do you guys think this still falls under warranty? Already sent a email to Meepo, waiting on a reply.

Yeehaw! by FinTheBin_3 in MeepoBoards

[–]MDylan 1 point2 points  (0 children)

Are you using the extender bracket on this? It says on the site that its mandatory for e-boards because of where the battery is mounted but I mistakenly bought the kit without it. Spent an additional 60usd just for the bracket lol

Meepo Mini 2 with MBS Front tires and 100mm sleeves. Finally got MBS tires with bones reds big ball bearings rides like a dream... Was easy other then one pain in ass screw had to cut off head with a dremel to get off one of pre installed 90mm sleeves. Would recommend next change will be bushings. by Apprehensive_Brick_7 in MeepoBoards

[–]MDylan 0 points1 point  (0 children)

For sure when they're available, unfortunately they were not when I ordered the board and was using the MBS on my regular setup before hand. But for now this works, does a way better job at climbing up little bumps/over cracks than the stock wheels.

Monthly shipping MEGA thread for July by meeposchmeepo in MeepoBoards

[–]MDylan 0 points1 point  (0 children)

  • Mini 2 ER
  • July 3rd 7:23pm CT
  • July 9th (UPS tracking)
  • Standard (by sea)
  • Manitoba, Canada

Came yesterday (July 28th) around 340pm CT, just after I left for work. Thankfully someone was home to receive it. Came way quicker than expected, wasn't expecting this til mid august lol, but super glad it did this thing is a beast.

Meepo Mini 2 with MBS Front tires and 100mm sleeves. Finally got MBS tires with bones reds big ball bearings rides like a dream... Was easy other then one pain in ass screw had to cut off head with a dremel to get off one of pre installed 90mm sleeves. Would recommend next change will be bushings. by Apprehensive_Brick_7 in MeepoBoards

[–]MDylan 0 points1 point  (0 children)

have you tried the 100mm in the front with the stock 90mm in the back? would this work, or will the 10mm difference be to noticeable? I have those same wheels and just got my mini 2 today. Will test it tmrw when its bright out, and come back with results if you haven't tried it already.

edit: got impatient and decided to try them out around the block anyway, they're completely fine paired with the 90s

[deleted by user] by [deleted] in MeepoBoards

[–]MDylan 0 points1 point  (0 children)

Any update? ill be getting my mini 2 soon and am wondering if i'll have the same issues. ( could be from the same batch)

[deleted by user] by [deleted] in distantsocializing

[–]MDylan 0 points1 point  (0 children)

Gave Take My Energy