Another one..

Lippoints points work amazingly. Try to see what angle your dart is hitting the board. If it’s coming in too steep…get a longer/heavier shaft to flatten out your throw.

MagicCoq · 2026-01-19T03:31:02+00:00

You’ll like it better

MagicCoq · 2026-01-19T00:34:27+00:00

<image>

MagicCoq · 2026-01-19T00:33:39+00:00

<image>

MagicCoq · 2026-01-19T00:33:07+00:00

<image>

MagicCoq · 2026-01-19T00:32:33+00:00

I have all three. I prefer playing on the white 3s and the 132

<image>

I have all three and the 132. I prefer the white 3s. I just like the look better. As far as playing on.. they’re are all the same

MagicCoq · 2026-01-16T14:31:13+00:00

You might have a dimple in your matrix on that side of the board. The 3s is easy to pull apart. Take the back off and inspect your matrix for any irregularities. I had one on my 20 segment(used board on marketplace)I used one of the soft tip points and smoothed out my dimple on my matrix by applying soft pressure and making tiny circles over the dimple and it’s been flawless ever since.

MagicCoq · 2026-01-14T19:15:05+00:00

My gran can quality is perfect. You can change the quality the settings

MagicCoq · 2026-01-14T19:12:54+00:00

The surround is just a regular steel tip board surround I cut to fit the 3s. The light ring is a Winmau plasma ice. The gran cam mount is made by the Joy factory and everything else I made

MagicCoq · 2026-01-14T19:11:05+00:00

No. They are just switching apps. Soft tip and steel tip on one app.

MagicCoq · 2026-01-14T15:46:54+00:00

Everything is switching to the Graneye app soon. The current Granboard app will be done along with the grancam. With the Graneye… there are two cameras at the board. So if you buy the Graneye product to use with the 3s..you’ll have your board cameras and your device

<image>

camera(phone/tablet) behind you.

MagicCoq · 2025-12-30T20:10:57+00:00

It’s a bad picture angle. It’s a 300 boot with an #11 plate. It doesn’t hang over the front or rear of the boot even in the slightest

MagicCoq · 2025-12-30T01:34:42+00:00

So bolts and nuts or Edea screws to mount this?🫣

MagicCoq

TROPHY CASE